Another What's it worth thread - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ajbirken · 09-26-2005, 11:01 AM

I found a 1971 Jimmy that is lifted a total of about 7" shackle flip rear Tuff country springs front and a 3" body lift. Drivetrain is late 80's 350 with Q-jet, TH350/np205 D44 front 12 bolt rear 3.07 gears. It is sitting on very new 35" BFG MTs, has a homemade 6pt rollcage, no hard top, soft-top decent. body has rust no holes in the floorboard, but at least one of the rockers is bad. this is not a real good restoration candidate in my opinion but I am lazy. Runs drives kind of stops (brakes probably need bleeding)

The asking price is $1000.00. This sounds reasonable to me but I would love your guys opinions (I am a jeep person). I have a set of CUCV axles that will bolt in this thing to make it a beast. Thanks in advance.

adam

steve_kibbe · 09-26-2005, 11:54 AM

buy it, thats a good deal.

I'd offer $700, and go from there, even if you pay $1000 for it, its a good deal.

LUV2XCLR8 · 09-26-2005, 04:06 PM

Quote:

Originally Posted by steve_kibbe

buy it, thats a good deal.

I'd offer $700, and go from there, even if you pay $1000 for it, its a good deal.

71jimmy · 09-26-2005, 11:55 AM

That sounds like a good price. Do what Steve says! Where are you located?

ajbirken · 09-26-2005, 12:06 PM

Thanks for the input. At least you guys confirmed what I was thinking.

I am in NC.

I will certainly pass on the deal if I don't get myself.

ajbirken · 10-06-2005, 06:20 PM

It's sitting in my driveway! It is pretty sweet. I can't wait until it stops raining so I can take the top down!

Pop's72 · 10-06-2005, 06:55 PM

and make sure you post some pictures!

LUV2XCLR8 · 10-06-2005, 08:21 PM

Quote:

Originally Posted by Pop's72

and make sure you post some pictures!

FRENCHBLUE72 · 10-09-2005, 11:31 AM

Congrats on the score but we need some pic's!!!!!!

ajbirken · 10-09-2005, 12:04 PM

I got her tuned up and running pretty well. I'm working on the pics (wifey is the one with the fancy digicam). It's pretty freakin ugly. Imagine the one that earl in TN is selling and beat the crap out of it with a palomino rust/primer paint job http://67-72chevytrucks.com/vboard/s....php3?t=175875.

ajbirken · 10-09-2005, 12:20 PM

Here are some PO pics

RunTMCfan · 10-09-2005, 12:35 PM

That thing is killer! Just keep her running good and don't worry about how it looks. The paint job is smokin'.

Rob

LUV2XCLR8 · 10-09-2005, 08:12 PM

Quote:

Originally Posted by RunTMCfan

That thing is killer! Just keep her running good and don't worry about how it looks. The paint job is smokin'.

Rob

and a big

2 being part of the BLAZER club

*Medicanman71* · 10-09-2005, 09:45 PM

bad ass, what are your plans with it again? Going to mash it around as is for a while or do you infact have big plans for it?

krue · 10-09-2005, 10:23 PM

Looks better than mine.

ajbirken · 10-10-2005, 07:53 AM

Thanks for the comments.

I've got a set of CUCV axles and some 39's just lying around, BUUUTT I know how slow I am with projects so I will probably just cruise as is for a little while (nice weather year round here in NC for the most part) before any major transformation. I have always loved these trucks and am very happy to finally have one!

09-26-2005, 11:01 AM	#1
ajbirken Registered User Join Date: Nov 2002 Location: raleigh, NC Posts: 60	Another What's it worth thread (now with pics) I found a 1971 Jimmy that is lifted a total of about 7" shackle flip rear Tuff country springs front and a 3" body lift. Drivetrain is late 80's 350 with Q-jet, TH350/np205 D44 front 12 bolt rear 3.07 gears. It is sitting on very new 35" BFG MTs, has a homemade 6pt rollcage, no hard top, soft-top decent. body has rust no holes in the floorboard, but at least one of the rockers is bad. this is not a real good restoration candidate in my opinion but I am lazy. Runs drives kind of stops (brakes probably need bleeding) The asking price is $1000.00. This sounds reasonable to me but I would love your guys opinions (I am a jeep person). I have a set of CUCV axles that will bolt in this thing to make it a beast. Thanks in advance. adam __________________ 1971 GMC Jimmy 350/350/205/D60/14bolt on 38's 1984 M1008 CUCV 6.2/TH400/208/D60/14bolt on 36's 1991 W250 5.9/G360/205/D60/D70 on 33's (tow-rig) Lotsa Full Size Jeeps (J10/J20)! Adam Last edited by ajbirken; 10-09-2005 at 12:23 PM.

09-26-2005, 11:55 AM	#4
71jimmy Registered User Join Date: Mar 2004 Location: Sacramento, CA Posts: 1,083	That sounds like a good price. Do what Steve says! Where are you located? __________________ '71 Jimmy, 350, SM465, NP205, 2in Tuff Country lift, 33s on rallies, TBI, softtop and hardtop "If life was fair you'd be able to afford one of each and a garage large enough to house them all." Last edited by 71jimmy; 09-26-2005 at 11:58 AM.

09-26-2005, 12:06 PM	#5
ajbirken Registered User Join Date: Nov 2002 Location: raleigh, NC Posts: 60	Thanks for the input. At least you guys confirmed what I was thinking. I am in NC. I will certainly pass on the deal if I don't get myself. __________________ 1971 GMC Jimmy 350/350/205/D60/14bolt on 38's 1984 M1008 CUCV 6.2/TH400/208/D60/14bolt on 36's 1991 W250 5.9/G360/205/D60/D70 on 33's (tow-rig) Lotsa Full Size Jeeps (J10/J20)! Adam

10-06-2005, 06:20 PM	#6
ajbirken Registered User Join Date: Nov 2002 Location: raleigh, NC Posts: 60	It's sitting in my driveway! It is pretty sweet. I can't wait until it stops raining so I can take the top down! __________________ 1971 GMC Jimmy 350/350/205/D60/14bolt on 38's 1984 M1008 CUCV 6.2/TH400/208/D60/14bolt on 36's 1991 W250 5.9/G360/205/D60/D70 on 33's (tow-rig) Lotsa Full Size Jeeps (J10/J20)! Adam

10-09-2005, 11:31 AM	#9
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Congrats on the score but we need some pic's!!!!!! __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

09-26-2005, 11:54 AM	#2
steve_kibbe Registered User Join Date: Jul 2005 Location: South Carolina Posts: 49	buy it, thats a good deal. I'd offer $700, and go from there, even if you pay $1000 for it, its a good deal.

10-06-2005, 06:55 PM	#7
Pop's72 It's ok to stare... Join Date: Dec 2004 Location: San Jose, CA Posts: 667	and make sure you post some pictures!

10-09-2005, 12:04 PM	#10
ajbirken Registered User Join Date: Nov 2002 Location: raleigh, NC Posts: 60	I got her tuned up and running pretty well. I'm working on the pics (wifey is the one with the fancy digicam). It's pretty freakin ugly. Imagine the one that earl in TN is selling and beat the crap out of it with a palomino rust/primer paint job http://67-72chevytrucks.com/vboard/s....php3?t=175875. __________________ 1971 GMC Jimmy 350/350/205/D60/14bolt on 38's 1984 M1008 CUCV 6.2/TH400/208/D60/14bolt on 36's 1991 W250 5.9/G360/205/D60/D70 on 33's (tow-rig) Lotsa Full Size Jeeps (J10/J20)! Adam Last edited by ajbirken; 10-09-2005 at 12:05 PM.

10-09-2005, 12:20 PM	#11
ajbirken Registered User Join Date: Nov 2002 Location: raleigh, NC Posts: 60	Here are some PO pics Attached Images __________________ 1971 GMC Jimmy 350/350/205/D60/14bolt on 38's 1984 M1008 CUCV 6.2/TH400/208/D60/14bolt on 36's 1991 W250 5.9/G360/205/D60/D70 on 33's (tow-rig) Lotsa Full Size Jeeps (J10/J20)! Adam

10-09-2005, 12:35 PM	#12
RunTMCfan Registered User Join Date: Oct 2005 Location: San Diego, Ca Posts: 251	That thing is killer! Just keep her running good and don't worry about how it looks. The paint job is smokin'. Rob

10-09-2005, 09:45 PM	#14
Medicanman71 Account Suspended Join Date: May 2005 Location: Where the Wild Things Are Posts: 696	bad ass, what are your plans with it again? Going to mash it around as is for a while or do you infact have big plans for it?

10-09-2005, 10:23 PM	#15
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Looks better than mine. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

10-10-2005, 07:53 AM	#16
ajbirken Registered User Join Date: Nov 2002 Location: raleigh, NC Posts: 60	Thanks for the comments. I've got a set of CUCV axles and some 39's just lying around, BUUUTT I know how slow I am with projects so I will probably just cruise as is for a little while (nice weather year round here in NC for the most part) before any major transformation. I have always loved these trucks and am very happy to finally have one! __________________ 1971 GMC Jimmy 350/350/205/D60/14bolt on 38's 1984 M1008 CUCV 6.2/TH400/208/D60/14bolt on 36's 1991 W250 5.9/G360/205/D60/D70 on 33's (tow-rig) Lotsa Full Size Jeeps (J10/J20)! Adam

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.