Center Console Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RunTMCfan · 10-07-2005, 08:22 PM

What should my center console look like. This is it from a previous photo some of you have already seen. It has been painted. My only guess is that the original owner painted it to match the seats but it looks like hell.

Any suggestions?

I am not a traditionalist so a bone stock look is not the most important thing. I prefer to make modern day upgrades that could have been or look like what should have been stock. I'll upholster it, sand it, paint it...you get my point.

Rob

71swb4x4 · 10-07-2005, 11:14 PM

I think it would look OK black again. Really it doesn't matter, as long as you strip it and use quality paint. If you want to upgrade it and don't care about 100% originality I would remove the seatbelt insert and add a cupholder insert from a 73+ console. It would look stock to most people and you would have cupholders.

bouncytruck · 10-08-2005, 01:43 AM

I'd guess that your console was probably black originally. What color does the glove box tag say the interior is?

**tnblazerk5** · 10-08-2005, 10:18 AM

to fine the true color of it take it out of the truck and look at the bottom of it if it is also white scrap a place on the bottom of it and see what color it was ,most were black but there are other colors out there . as for cutting the seatbelt holders out of it, i wouldnt do that i would look for a differant one with cup holders and strip and paint the seatbelt one and sale it ,the seatbelt one is worth more than the cupholder is

10-07-2005, 08:22 PM	#1
RunTMCfan Registered User Join Date: Oct 2005 Location: San Diego, Ca Posts: 251	Center Console Question (pics) What should my center console look like. This is it from a previous photo some of you have already seen. It has been painted. My only guess is that the original owner painted it to match the seats but it looks like hell. Any suggestions? I am not a traditionalist so a bone stock look is not the most important thing. I prefer to make modern day upgrades that could have been or look like what should have been stock. I'll upholster it, sand it, paint it...you get my point. Rob Last edited by RunTMCfan; 10-07-2005 at 08:25 PM. Reason: More information

10-07-2005, 11:14 PM	#2
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	I think it would look OK black again. Really it doesn't matter, as long as you strip it and use quality paint. If you want to upgrade it and don't care about 100% originality I would remove the seatbelt insert and add a cupholder insert from a 73+ console. It would look stock to most people and you would have cupholders. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

10-08-2005, 01:43 AM	#3
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	I'd guess that your console was probably black originally. What color does the glove box tag say the interior is? __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

10-08-2005, 10:18 AM	#4
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	to fine the true color of it take it out of the truck and look at the bottom of it if it is also white scrap a place on the bottom of it and see what color it was ,most were black but there are other colors out there . as for cutting the seatbelt holders out of it, i wouldnt do that i would look for a differant one with cup holders and strip and paint the seatbelt one and sale it ,the seatbelt one is worth more than the cupholder is



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.