WTB Transfer case support rod - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Phuloi68** · 10-28-2005, 10:06 AM

Looking for a transfer case support rod that goes from a Turbo 350 trans to an NP 205 (part time) transfer case. I have one from what I think is a 208 TC and it seems to be a little longer. I can cut it down but if someone has the correct one I would rather go with that so I don't have to worry about screwing up the correct alignment of the bolt holes.

.

84 PUMPKIN · 10-28-2005, 11:05 AM

They were still available new at the GM store as of last year. I bought one for my '79 K10 and it wasn't that expensive (maybe $20.00?).

**Phuloi68** · 10-28-2005, 06:50 PM

Was that for a 350 trans to a 205 TC or to a 208 TC? I think there is about an inch difference. But thanks for the info. I will check it out.

84 PUMPKIN · 10-28-2005, 07:15 PM

Yes it was for a TH350/NP205 combo.

1976K5CHALET · 11-13-2005, 06:07 PM

Swapped the 203 out of my 79K5 years back. When installing the 205 we had to cut the rod to length and weld it up. 1980 was the only years a 205 was the standard option behind a th350 so if it ever was made by gm i'd have the local gm dealer look up an 80 K5 and see if they did make it and if its ava.
The last swap i did was my 76 K5 Chalet and i bought a new shifter from gm and to my surprise they had redisgned the pivot point and added a sleeved bushing to stop the rattle complaint and they have a new pivot bolt for the shifter that excepts a grease zerk.

Doug W.

1969 GMC · 11-21-2005, 10:34 PM

Quote:

Originally Posted by 1976K5CHALET

1980 was the only years a 205 was the standard option behind a th350

for future reference, the TH350/NP205 combo was also available from either 69 or 70 up to and including 72 for all 4x4 models.

10-28-2005, 10:06 AM	#1
Phuloi68 Senior Member Join Date: Dec 2003 Location: Valparaiso, In Posts: 1,114	WTB Transfer case support rod Looking for a transfer case support rod that goes from a Turbo 350 trans to an NP 205 (part time) transfer case. I have one from what I think is a 208 TC and it seems to be a little longer. I can cut it down but if someone has the correct one I would rather go with that so I don't have to worry about screwing up the correct alignment of the bolt holes. . __________________ Phuloi68 Indy survivor Norwood survivor Big Sandy survivor for those who fight for it... F R E E D O M has a price the protected will never know. Last edited by Phuloi68; 06-27-2006 at 02:16 PM.

10-28-2005, 11:05 AM	#2
84 PUMPKIN Registered User Join Date: Oct 2004 Location: Alabama Posts: 166	Re: WTB Transfer case support rod They were still available new at the GM store as of last year. I bought one for my '79 K10 and it wasn't that expensive (maybe $20.00?).

10-28-2005, 06:50 PM	#3
Phuloi68 Senior Member Join Date: Dec 2003 Location: Valparaiso, In Posts: 1,114	Re: WTB Transfer case support rod Was that for a 350 trans to a 205 TC or to a 208 TC? I think there is about an inch difference. But thanks for the info. I will check it out. __________________ Phuloi68 Indy survivor Norwood survivor Big Sandy survivor for those who fight for it... F R E E D O M has a price the protected will never know.

10-28-2005, 07:15 PM	#4
84 PUMPKIN Registered User Join Date: Oct 2004 Location: Alabama Posts: 166	Re: WTB Transfer case support rod Yes it was for a TH350/NP205 combo.

11-13-2005, 06:07 PM	#5
1976K5CHALET Senior Member Join Date: Jan 2003 Location: Grand Junction, Colorado Posts: 610	Re: WTB Transfer case support rod Swapped the 203 out of my 79K5 years back. When installing the 205 we had to cut the rod to length and weld it up. 1980 was the only years a 205 was the standard option behind a th350 so if it ever was made by gm i'd have the local gm dealer look up an 80 K5 and see if they did make it and if its ava. The last swap i did was my 76 K5 Chalet and i bought a new shifter from gm and to my surprise they had redisgned the pivot point and added a sleeved bushing to stop the rattle complaint and they have a new pivot bolt for the shifter that excepts a grease zerk. Doug W. __________________ Doug Wright aka K5NUTT over @coloradok5.com Owner of http://groups.yahoo.com/group/ChevyK5BlazerChalets Certified K5 Nut

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.