I need help with guage wiring... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ol'blue72 · 02-01-2006, 09:03 PM

I have a '71 dash with only speedo and idiot lites and i want to swap it for a '72 full cluster dash but the wires are in different locations on the plugs. Is it as simple as matching colors and splicing the 72 plug to the 71 harness?

Stroker · 02-01-2006, 10:51 PM

I haven't done the swap but here's a link that might help you.
http://www.gmcpaulstruckparts.com/Tech%20Tips1.htm

Ol'blue72 · 02-02-2006, 12:39 AM

Thanks Stroker, I found what i needed in some 2001 archives at the site. Now i just gotta do-it-to-it w/o burning something! one too many windshields on the ol' melon, ya know....

MDC · 02-02-2006, 12:41 AM

Follow the instructions in Strokers link and you will be fine. All you need is a small pocket screwdriver to get the pins out of the connector. Do one at a time, relocating per the instructions.

avejoe · 02-02-2006, 12:48 AM

I did the swap which means just about anybody can do it. I recommend finding a loom at the junk yard so you can practice on how to remove the pins w/o buggering them up too much.

02-01-2006, 09:03 PM	#1
Ol'blue72 Registered User Join Date: Jan 2006 Location: Berry,Al Posts: 52	I need help with guage wiring... I have a '71 dash with only speedo and idiot lites and i want to swap it for a '72 full cluster dash but the wires are in different locations on the plugs. Is it as simple as matching colors and splicing the 72 plug to the 71 harness?

02-01-2006, 10:51 PM	#2
Stroker Registered User Join Date: Mar 2001 Location: Moore, Ok Posts: 1,149	Re: I need help with guage wiring... I haven't done the swap but here's a link that might help you. http://www.gmcpaulstruckparts.com/Tech%20Tips1.htm __________________ 72 SWB parts and pieces Oklahoma

02-02-2006, 12:39 AM	#3
Ol'blue72 Registered User Join Date: Jan 2006 Location: Berry,Al Posts: 52	Re: I need help with guage wiring... Thanks Stroker, I found what i needed in some 2001 archives at the site. Now i just gotta do-it-to-it w/o burning something! one too many windshields on the ol' melon, ya know....

02-02-2006, 12:41 AM	#4
MDC Registered User Join Date: Oct 2005 Location: N Texas Posts: 727	Re: I need help with guage wiring... Follow the instructions in Strokers link and you will be fine. All you need is a small pocket screwdriver to get the pins out of the connector. Do one at a time, relocating per the instructions. __________________ 67 C10 Shortbed 327 05 F150 4x4 NO APPOLOGIES 's 02 Xpress X19 02 Yamaha VMax 150 www.xpressboats.com Nothing says 'poor craftmanship' like wrinkles in your duct tape

02-02-2006, 12:48 AM	#5
avejoe Custer had a plan too. Join Date: Dec 2003 Location: No. California Posts: 344	Re: I need help with guage wiring... I did the swap which means just about anybody can do it. I recommend finding a loom at the junk yard so you can practice on how to remove the pins w/o buggering them up too much. __________________ 72 K15 GMC (aka Big White) Performance Rockers, Cab Corners, and Floors Fossil Fuel Glutton Neighborhood Nuisance 98 BMW 540i for Speed (Sold ) 05 Subaru Outback for mileage

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.