|
|
|
05-01-2006, 10:24 AM
|
#1 |
|
Registered User
Join Date: Nov 2003
Location: Pontiac, MI
Posts: 31
|
Stupid Brake Question
 I've replaced the pads and rotors on my other cars in the past, but for some reason I'm having a rough time with the front rotors/hubs on my 4wd blazer. The calipers came off fine and I took off the hub cover, but I'm not sure if the rotor and grease/dust cover are just supposed to hammer off or if I have to take out some inner components of the locking hub to remove them? I stared at it and thought I could figure it out, but figured I'd save myself some time and just ask the experts.Thanks! |
|
|
|
05-01-2006, 12:34 PM
|
#2 |
|
Registered User
Join Date: Mar 2004
Location: Sacramento, CA
Posts: 1,083
|
Re: Stupid Brake Question
You've got to take it all apart to get the rotor off as far as I know.
__________________
'71  Jimmy, 350, SM465, NP205, 2in Tuff Country lift, 33s on rallies, TBI, softtop and hardtop"If life was fair you'd be able to afford one of each and a garage large enough to house them all." |
|
|
|
|
05-01-2006, 01:22 PM
|
#3 |
|
Registered User
 Join Date: Dec 2002
Location: Northern Virginia
Posts: 1,268
|
Re: Stupid Brake Question
Right at the front you have a snap ring that releases some of the parts then you have 2 rings that require a special socket. Not hard but if you have never done it get a board and lay it out just as you take it off so you can get it back in correct order
|
|
|
|
|
05-01-2006, 01:22 PM
|
#4 |
|
SKINNY TIRES RULE!
Join Date: Sep 2001
Location: Bothell, WA
Posts: 11,038
|
Re: Stupid Brake Question
The hubs are part of the rotors. Get a Hines book on 69+ blazers. It has step-by-step instructions on removing the hubs and rotors. There is a special socket you will need too. At first, Schuck's said I needed to rent it the tool, so I did. Once to remove it, again to install it (had to take the rotors to be turned. Only one shop in the area would do it and they required a whole day). I found the tool at the NAPA for $6 (the same as the rental price at Schucks). Moral, the counter guy at Schucks is a Scmuck!
__________________
bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L |
|
|
|
|
05-02-2006, 10:44 AM
|
#5 |
|
Registered User
Join Date: Nov 2003
Location: Pontiac, MI
Posts: 31
|
Re: Stupid Brake Question
Picked up the manual and the special socket at Autozone. I didn't see that large snap ring at the end, got that off and it was simple from there. Thanks for the help as always!!
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
