Check these exhaust manifolds out - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jason915 · 06-28-2006, 05:04 PM

I found this Blazer on e-bay but what I want to know is where did those exhaust manifolds come from that are pictured in the back with all of those new parts?? They look sweet! I have never seen them before

http://cgi.ebay.com/ebaymotors/Chevr...spagenameZWDVW

cdowns · 06-28-2006, 05:12 PM

if you read the description they're ID'd as sanderson exhaust manifolds so my wild guess would be they come from sanderson

70rs/ss · 06-28-2006, 05:15 PM

Cast no less. I'll bet a nickle they hold in all kinds of heat, well like stock manifolds do.

LUV2XCLR8 · 06-28-2006, 05:33 PM

Kinda cool, but I wouldn't want to get them dirty / oily

FRENCHBLUE72 · 06-28-2006, 10:12 PM

Usally see those on the old street rods with no hoods..

Jason915 · 06-29-2006, 09:54 AM

Never heard of sandersons exhaust manifolds, Maybe if you painted them with some VHT clear they wouldn't be so hard to keep clean

glock35ipsc · 06-29-2006, 10:32 AM

Sanderson headers rock! Dad used to have a set on his T Bucket.

Jason915 · 06-29-2006, 11:03 AM

There is a better picture of it, thanks G35. They look like they would sit just like a factory camel back manifold.

Thanks

**gregfull** · 06-29-2006, 12:45 PM

Yep those are Sandersons. My Dad has a set on his 55 Cameo.

06-28-2006, 05:04 PM	#1
Jason915 Registered User Join Date: Jan 2005 Location: Colorado Springs Posts: 693	Check these exhaust manifolds out I found this Blazer on e-bay but what I want to know is where did those exhaust manifolds come from that are pictured in the back with all of those new parts?? They look sweet! I have never seen them before http://cgi.ebay.com/ebaymotors/Chevr...spagenameZWDVW __________________ 1971 GMC K1500 SWB Fleetside, 4" skyjacker softride and, 14 Bolt FF, HD Dana 44 4.10's 1970 K5 TBI conversion lifted etc SOLD 1968 C20 camper truck SOLD “To ban guns because criminals use them is to tell the innocent and law-abiding that their rights and liberties depend not on their own conduct, but on the conduct of the guilty and the lawless.” Jeff Snyder

06-28-2006, 05:12 PM	#2
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Check these exhaust manifolds out if you read the description they're ID'd as sanderson exhaust manifolds so my wild guess would be they come from sanderson __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

06-28-2006, 05:15 PM	#3
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,270	Re: Check these exhaust manifolds out Cast no less. I'll bet a nickle they hold in all kinds of heat, well like stock manifolds do.

06-28-2006, 05:33 PM	#4
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Check these exhaust manifolds out Kinda cool, but I wouldn't want to get them dirty / oily __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

06-28-2006, 10:12 PM	#5
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Check these exhaust manifolds out Usally see those on the old street rods with no hoods.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

06-29-2006, 09:54 AM	#6
Jason915 Registered User Join Date: Jan 2005 Location: Colorado Springs Posts: 693	Re: Check these exhaust manifolds out Never heard of sandersons exhaust manifolds, Maybe if you painted them with some VHT clear they wouldn't be so hard to keep clean __________________ 1971 GMC K1500 SWB Fleetside, 4" skyjacker softride and, 14 Bolt FF, HD Dana 44 4.10's 1970 K5 TBI conversion lifted etc SOLD 1968 C20 camper truck SOLD “To ban guns because criminals use them is to tell the innocent and law-abiding that their rights and liberties depend not on their own conduct, but on the conduct of the guilty and the lawless.” Jeff Snyder

06-29-2006, 10:32 AM	#7
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: Check these exhaust manifolds out Sanderson headers rock! Dad used to have a set on his T Bucket. __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

06-29-2006, 11:03 AM	#8
Jason915 Registered User Join Date: Jan 2005 Location: Colorado Springs Posts: 693	Re: Check these exhaust manifolds out There is a better picture of it, thanks G35. They look like they would sit just like a factory camel back manifold. Thanks __________________ 1971 GMC K1500 SWB Fleetside, 4" skyjacker softride and, 14 Bolt FF, HD Dana 44 4.10's 1970 K5 TBI conversion lifted etc SOLD 1968 C20 camper truck SOLD “To ban guns because criminals use them is to tell the innocent and law-abiding that their rights and liberties depend not on their own conduct, but on the conduct of the guilty and the lawless.” Jeff Snyder

06-29-2006, 12:45 PM	#9
gregfull Registered User Join Date: Jan 2004 Location: Richmond, Texas Posts: 598	Re: Check these exhaust manifolds out Yep those are Sandersons. My Dad has a set on his 55 Cameo. __________________ My Suburban Project 72 Suburban 68 SWB 57 Belair 55 Cameo 06 Chevy 1/2 ton crew 09 Suburban

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.