1967 front suspension - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kanuck · 10-03-2006, 11:25 PM

I know I've ask part of this before and was told I could bolt in a cross member from a 73-82 to get my 5 lug and disc brakes, but I was just wondering if I plan to lower the truck a bit if there is a spindle availible that fits on my control arms that is both a drop spindle and converts to 5 lug disc, would this be a cheaper and easier way to go. Also the truck is a 1/2 ton yet sits fairly high, could someone have put in heavier springs, or did some of the factory ones sit high??
Thanks Hagen
Name: 67right.jpg
Views: 273
Size: 85.3 KB

Name: 67right.jpg
Views: 273
Size: 85.3 KB

Name: alexs 004.jpg
Views: 255
Size: 83.0 KB

Name: 70chev.jpg
Views: 274
Size: 66.1 KB

Geezer · 10-03-2006, 11:50 PM

I used an 88 suburban front suspension in my 67, The drop spindles might be cheaper for the newer models, the rest of the parts are. It doesn't look that high to me...

67chevy2wd · 10-04-2006, 12:36 AM

As long as you use a disc brake drop spindle you will be able to bolt on a 5 lug disc setup. I have found them at almost any one of the vendors or at www.earlyclassic.com lots of people use them for suspension parts. Come to think of it I dont' think I have seen a drop spindle that allowed you to use the drum brake setup.

jimmydean · 10-04-2006, 12:24 PM

As far as I know, there are no drop spindle drum kits. I looked long and hard before sucking it up and installing discs.

10-03-2006, 11:25 PM	#1
kanuck Registered User Join Date: Dec 2005 Location: canada Posts: 166	1967 front suspension I know I've ask part of this before and was told I could bolt in a cross member from a 73-82 to get my 5 lug and disc brakes, but I was just wondering if I plan to lower the truck a bit if there is a spindle availible that fits on my control arms that is both a drop spindle and converts to 5 lug disc, would this be a cheaper and easier way to go. Also the truck is a 1/2 ton yet sits fairly high, could someone have put in heavier springs, or did some of the factory ones sit high?? Thanks Hagen __________________ '70 Malibu with 383 stroker/T350 '56 SWB Mercury pickup..under construction '67 Firebird Convertible...all done stock '70 LWB 350 on propane...beater '69 LWB 350/T400 body restored

10-03-2006, 11:50 PM	#2
Geezer Registered User Join Date: May 2005 Location: Spring Branch Texas Posts: 177	Re: 1967 front suspension I used an 88 suburban front suspension in my 67, The drop spindles might be cheaper for the newer models, the rest of the parts are. It doesn't look that high to me... __________________ If you can't drive it park it! If you can't park it milk it!

10-04-2006, 12:36 AM	#3
67chevy2wd Registered User Join Date: Sep 2003 Location: New Salem, ND Posts: 1,558	Re: 1967 front suspension As long as you use a disc brake drop spindle you will be able to bolt on a 5 lug disc setup. I have found them at almost any one of the vendors or at www.earlyclassic.com lots of people use them for suspension parts. Come to think of it I dont' think I have seen a drop spindle that allowed you to use the drum brake setup. __________________ 07 Chevy classic LBZ Duramax (a few mods) '67 Chevy 1/2 ton 2wd (in pieces) '69 Chevy 1/2 ton 2wd (on hold) '71 GMC 3/4 ton 4x4 ‘71 GMC 1/2 ton 2wd suburban

10-04-2006, 12:24 PM	#4
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: 1967 front suspension As far as I know, there are no drop spindle drum kits. I looked long and hard before sucking it up and installing discs.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.