|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
10-18-2006, 12:09 PM
|
#1 |
|
Under Major Construction
Join Date: Dec 2003
Location: harker heights, tx
Posts: 120
|
Frame notch / flip kit question
Right now the back of my 82 is lowered a few inches with a shackle/ hanger combo, and i have to take care of some other things before i can bag the rear, so im just gonna flip it to get rid of the crazy rake ive got going on. Anyways , i have 6 inches of clearance between the rear end and the frame, if i flip the rear can i get away with a c notch or will i need to weld in some real notches? It is my only vehicle so its hard to get anything done when i have to drive it the next day. thanks
|
|
|
|
10-18-2006, 07:07 PM
|
#2 |
|
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,066
|
Re: Frame notch / flip kit question
C-notches will work fine. I have a flip kit & BellTech 2" dropped shackles & don't have a c-notch @ all (3yrs now). It bottoms out but is drivable as it sits now (not enjoyable, but drivable).
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
