|
|
|
11-17-2006, 08:54 AM
|
#1 |
|
blood type; Retumbo
Join Date: Jan 2004
Location: next to my reloading bench
Posts: 10,269
|
quick question
are the lower arms interchangeable between a 68 and an 80? specifically the shaft diameters.
TIA Todd |
|
|
|
11-17-2006, 11:05 AM
|
#2 |
|
Formerly LSC71
Join Date: Feb 2004
Location: Indiana
Posts: 186
|
Re: quick question
Those arms are interchangeable, the only thing that will not be is the lower balljoint if you are still using the 68 spindle. If you have a 71 or newer spindle (disc brakes) the 80 balljoint will work.
|
|
|
|
|
11-17-2006, 02:13 PM
|
#3 |
|
blood type; Retumbo
Join Date: Jan 2004
Location: next to my reloading bench
Posts: 10,269
|
Re: quick question
thanks. I have 68 arms with 80 spindles and joints. but I need to replace the arms due to irreversible damage.
|
|
|
|
|
11-17-2006, 03:54 PM
|
#4 |
|
Formerly LSC71
Join Date: Feb 2004
Location: Indiana
Posts: 186
|
Re: quick question
yep you should be fine. Like I said the big thing to make sure that your balljoints match the spindle you are using.
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
