I need to get this @$%&* steering wheel off! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BIG CTY · 11-18-2006, 09:03 AM

I put one of the cheapy (IMO) Grant steering wheels in my bucket. I cant begin to tell you how much easier it became to drive my truck with my 6'5" 265 frame with a much smaller wheel. Anyway I tightened it down WAY to far, I didnt put the signal light cancel thing on, and the horn always blows (I have since straight wired a horn) so I screwed something up there too. I want to take it off and start over, BUT I tried to do that the first time and couldnt get holes to line up for the use of the steering wheel puller I have. What in the he!! do I need to do to get this adapter off? Drill a hole in it? Maybe use a different type of puller? This is the wheel I

"installed":

It looks like something like this MIGHT work:

but before I go buying things I'd like some input.

!

**Chevy Fleetside** · 11-18-2006, 10:31 AM

Yes that puller will work if you have the screw holes in the adapter.. That is what I usually use to pull steering wheels and seems to work everytime...

11-18-2006, 09:03 AM	#1
BIG CTY Between the earth and the sky Join Date: Oct 2006 Location: Chesapeake, VA Posts: 822	*I need to get this @$%& steering wheel off!** I put one of the cheapy (IMO) Grant steering wheels in my bucket. I cant begin to tell you how much easier it became to drive my truck with my 6'5" 265 frame with a much smaller wheel. Anyway I tightened it down WAY to far, I didnt put the signal light cancel thing on, and the horn always blows (I have since straight wired a horn) so I screwed something up there too. I want to take it off and start over, BUT I tried to do that the first time and couldnt get holes to line up for the use of the steering wheel puller I have. What in the he!! do I need to do to get this adapter off? Drill a hole in it? Maybe use a different type of puller? This is the wheel I "installed": It looks like something like this MIGHT work: but before I go buying things I'd like some input. ! __________________ Chris - 1966 C10 Shortbed Fleetside, 1991 GMC Sierra 1500 Extended Cab, 1993 Blazer Sport 4x4 My other rides: 1969 Chevrolet Impala SS427 Convertible 1976 Dodge Tradesman B200 2002 Nissan Maxima 6 speed 2004 Mercedes Benz CL500

11-18-2006, 10:31 AM	#2
Chevy Fleetside Registered User Join Date: Sep 2006 Location: San Francisco Posts: 4,782	*Re: I need to get this @$%& steering wheel off!** Yes that puller will work if you have the screw holes in the adapter.. That is what I usually use to pull steering wheels and seems to work everytime...

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.