|
11-22-2006, 11:23 PM | #1 |
Registered User
Join Date: Feb 2006
Location: long pond,pa
Posts: 51
|
free to good home!!!
i have to get rid of my project it's a 1977 chevy k 10 with a 400 small block,350 trans,full time 4 wheel drive,engine runs needs timing done.has brand new distributor,i moved to new jersey and am selling my house so it has to go,no place here to keep it,the bed is off and the cab is unbolted front end is off basically a rolling chassis ,cab and bed pretty rusty,no pics sorry truck is in long pond ,pa (poconos)has good doors newer radiator,good hood.I just have to get it out of there.send me an email at tedbick@aol.com or just write back here.i'll check this every day.
|
11-23-2006, 02:16 AM | #2 |
Chevys Kick A$$
Join Date: Jan 2005
Location: Zootown, MT
Posts: 12,699
|
Re: free to good home!!!
Damn I wish u were closer. Sorry to hear you have got to get rid of your truck, good luck!
__________________
*HOODS is what I answer too* -'79, '77, '88 Pickup Sold, '85 Camaro, '83 T/A, '81,'83,'90 K5 Blazer All Sold -'79 3/4 ton "Big Yellow Bananna" Lifted 4spd. 39.5 TSL Swampers, The money Pit -'86 K5 Blazer Silverado 6.2 4" lift 35"s -'95 Ext. Cab Shorty 4" Tuff Country rolling 35" M/T's -'83 Monte Carlo T-Tops. 126,500 Original Miles -LATER I would rather push a Chevy then drive a ford!!
|
11-23-2006, 02:21 AM | #3 |
Active Member
Join Date: Mar 2006
Location: Arlington, TX
Posts: 111
|
Re: free to good home!!!
any parting out or just the whole thing? I have a friend up there, but he can't get the whole truck I could get him to get just about everything he could fit in his trunk and back seat
|
11-23-2006, 06:49 AM | #4 |
Senior Member
Join Date: Nov 2004
Location: glen burnie md
Posts: 447
|
Re: free to good home!!!
How much you asking for it??
__________________
This is my best friend |
11-23-2006, 01:30 PM | #5 | |
Happy to be here
Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,021
|
Re: free to good home!!!
Quote:
__________________
Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" |
|
11-23-2006, 11:36 PM | #6 |
Where's my beer?
Join Date: Aug 2002
Location: I live in the state of denial....
Posts: 5,620
|
I'll take it!
How soon do you need this moved from the property? I'm south of Harrisburg, I can pick this up as soon as I finish my car trailer, let me know.
__________________
Paul How do you make the invisible, visible?.........You take it away. |
11-23-2006, 11:44 PM | #7 |
Senior Member
Join Date: Dec 2004
Location: Southern Pines NC
Posts: 3,853
|
Re: free to good home!!!
i would be interested but couldn't do it until next weekend.
E-Mail sent Thanks, Steve Last edited by qksilver; 11-23-2006 at 11:52 PM. |
11-24-2006, 01:07 PM | #8 |
Registered User
Join Date: Feb 2005
Location: Northeast--Bethlehem, Pennslyvania
Posts: 642
|
Re: free to good home!!!
If The truck is still availabl i 'd be interested it it. I'm from bethlehem.
Since i'm close to new jersey you may come and visit it and maybe later get her back. John
__________________
Big Blue ( John ) 79 Chevy Pick up.....My Dailey STILL Working on a frame up: 1987 Truck body on a 78 Blazer frame. Need cab blasted to start project. Got the cab BLASTED, Now Prep and Paint. Started to lay SOME BONDO and primer. Done, Ordering paint. Got paint, Stuff painted,Cab,Fenders, Hood more later. 9/7/2015 Got the clear coat on,now time to take one off. Started to put things back (What a nightmare) like the heating and AC stuff,inside wire harness, outside AC unit and booster, still more. May 2016, still working on the inside. Got duck work in,heating and AC. Radio (stock) in dash with after market in console later, Speaker are hooked up, Steering column is in. Getting ready to drop the cab onto the frame, Working on engine now since I have the room. Well here it is 2018, got the engine in and it runs, now I need to get the exhaust system in so I can adjust the lifters, to loud right now. Got the exhaust on now I am waiting for the break parts to come in. |
11-24-2006, 09:07 PM | #9 |
Registered User
Join Date: Feb 2006
Location: long pond,pa
Posts: 51
|
Re: free to good home!!!
QKSILVER is 1st in line,Then big blue,has to go asap the buyer of my house is getting a home inspection next week.closing sometime end of the month.
|
11-24-2006, 09:44 PM | #10 | |
Where's my beer?
Join Date: Aug 2002
Location: I live in the state of denial....
Posts: 5,620
|
Re: free to good home!!!
Quote:
I guess I'll take my sweet time in putting the fenders and the winch on my trailer since I won't be able to finish it in time So much for replying first that I would take it
__________________
Paul How do you make the invisible, visible?.........You take it away. |
|
11-24-2006, 10:25 PM | #11 |
Registered User
Join Date: Jun 2006
Location: WVa
Posts: 758
|
Re: free to good home!!!
Day late congrats to whoever gets it Though chevy fatatman called it first i missed it too I rarely read haeders
Shane |
12-01-2006, 07:53 PM | #12 |
Registered User
Join Date: Feb 2006
Location: long pond,pa
Posts: 51
|
Re: free to good home!!!
this has to go by next weekend the whole truck not parting out .or its going to the junk yard ,quicksilver still has not let me know what is going on i cant wait forever,anybody?
|
12-01-2006, 08:35 PM | #13 |
Senior Member
Join Date: May 2004
Location: Binghamton, NY
Posts: 3,469
|
Re: free to good home!!!
Dang, I'm little over an hour away. I have no tow vehicel, trailor or anywhere to put it!!! I'd love to have another 400 tho.......
__________________
2000 GMC CCSB 454/4L80 6” lift SAS 1999 Chevy CCSB 454/NV4500 4” SAS 1999 GMC Yukon 350/4L60 6" SAS |
12-01-2006, 09:08 PM | #14 |
Registered User
Join Date: Dec 2003
Location: OTR
Posts: 338
|
Re: free to good home!!!
you've got mail.
|
12-01-2006, 11:47 PM | #15 |
Registered User
Join Date: Feb 2005
Location: Northeast--Bethlehem, Pennslyvania
Posts: 642
|
Re: free to good home!!!
Hi tedbick,
I sent you an email message. John "Big Blue"
__________________
Big Blue ( John ) 79 Chevy Pick up.....My Dailey STILL Working on a frame up: 1987 Truck body on a 78 Blazer frame. Need cab blasted to start project. Got the cab BLASTED, Now Prep and Paint. Started to lay SOME BONDO and primer. Done, Ordering paint. Got paint, Stuff painted,Cab,Fenders, Hood more later. 9/7/2015 Got the clear coat on,now time to take one off. Started to put things back (What a nightmare) like the heating and AC stuff,inside wire harness, outside AC unit and booster, still more. May 2016, still working on the inside. Got duck work in,heating and AC. Radio (stock) in dash with after market in console later, Speaker are hooked up, Steering column is in. Getting ready to drop the cab onto the frame, Working on engine now since I have the room. Well here it is 2018, got the engine in and it runs, now I need to get the exhaust system in so I can adjust the lifters, to loud right now. Got the exhaust on now I am waiting for the break parts to come in. |
12-10-2006, 08:47 PM | #16 |
Registered User
Join Date: Feb 2005
Location: Northeast--Bethlehem, Pennslyvania
Posts: 642
|
Re: free to good home!!!
Hi Ted
We picked up the truck on Sunday. Could you please send the title. Sorry about your loss. The truck will be used on my project truck. It will take me some time to finish it. I hope that when i do i have the chance to show it to you. Again thanks for the truck and again sorry about you having to give her up. Hope to hear from you on the forum. John
__________________
Big Blue ( John ) 79 Chevy Pick up.....My Dailey STILL Working on a frame up: 1987 Truck body on a 78 Blazer frame. Need cab blasted to start project. Got the cab BLASTED, Now Prep and Paint. Started to lay SOME BONDO and primer. Done, Ordering paint. Got paint, Stuff painted,Cab,Fenders, Hood more later. 9/7/2015 Got the clear coat on,now time to take one off. Started to put things back (What a nightmare) like the heating and AC stuff,inside wire harness, outside AC unit and booster, still more. May 2016, still working on the inside. Got duck work in,heating and AC. Radio (stock) in dash with after market in console later, Speaker are hooked up, Steering column is in. Getting ready to drop the cab onto the frame, Working on engine now since I have the room. Well here it is 2018, got the engine in and it runs, now I need to get the exhaust system in so I can adjust the lifters, to loud right now. Got the exhaust on now I am waiting for the break parts to come in. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|