84 c20 burb drop?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

77 burb · 11-27-2006, 10:51 PM

want to drop it low but dont want to z frame
want to do 4link with bags in rear and notch
have to keep 3rd seat (6 kids)
most ?'s are what to do in front
arms and bags spindles
this will be my daily driver
and make monthly trips from va to pa

77 burb · 11-29-2006, 08:23 PM

if i z the frame what else needs to be done
lower motor mounts,steering
exhaust?
I assume i will lose my inner fenders
what else will need to be removed or
moved
also rad to motor what about hoses
and ac lines

77 burb · 12-09-2006, 02:19 PM

looks like i going to do a static drop for now
what parts work best to get
3" spring
3" spindle
6-8"flip kit
(want to sit low but level)
going to run16" front 18" rear stealies

XXL · 12-09-2006, 03:09 PM

Is this the Haiku thread?

XXL · 12-09-2006, 03:11 PM

I guess I should have said...

Is this thread Haiku?
Everything is in short bursts
This line's meaningless

77 burb · 12-09-2006, 06:42 PM

lol just wanted to know what thing work together and what dont i'll try to keep it long lines for you to read
?if it matters 99% of the time truck will have 2 adults and six kids
(750lbs total) 300lb front / 140 mid / 265 rear
now im tring to draaaaaaaaaaaaaawwwww this out to fill space
i dont think 400lbs in rear will change much

I do my own work sold my yota's to build on my ex tox rig

XXL · 12-09-2006, 06:54 PM

Quote:

Originally Posted by 77 burb

?if it matters 99% of the time truck will have 2 adults and six kids (750lbs total) 300lb front / 140 mid / 265 rear

Flip, springs, and spindles
Load capacity remains
Search this forum well

77 burb · 12-10-2006, 07:49 PM

well price in parts for static drop is about 3/4 the price of a full bag kit may just wait till spring and bag it
airbagit kit was $1400 looked have every thing i need to bag it
any body sell a better kit

tom coop · 12-10-2006, 10:47 PM

get suicide doors starter kit w 3/8 for 899 i think. you can do a different rear setup than me and it might be a little easier. in front just get sd. cups and cut them down a bit, and 3 " spindles. loose inner fenders. that should have you laying crossmember in front.

st1x10 · 12-11-2006, 12:33 AM

***************** is where its at.

77 burb · 12-11-2006, 12:54 AM

tom coop post up when you do your front susp with pics
how much do you cut out of the cups any pics or links
what spindles are best for the price

tom coop · 12-12-2006, 06:45 PM

i wont cut my cups till i get spindles but i will post up pics. not sure how much im gonna cut yet and havent decided on spindles but im yhinking abouy djm

11-27-2006, 10:51 PM	#1
77 burb Registered User Join Date: Jun 2006 Location: stafford,Va Posts: 30	84 c20 burb drop?? want to drop it low but dont want to z frame want to do 4link with bags in rear and notch have to keep 3rd seat (6 kids) most ?'s are what to do in front arms and bags spindles this will be my daily driver and make monthly trips from va to pa __________________ *********************** 84 burb soon to bag and drop bagging it,shaving bumpers(f/r) shave tail lights(leds below tail gate) updated flat door handles(chevy) ************************ leblancinva@yahoo.com Last edited by 77 burb; 11-29-2006 at 08:19 PM.

11-29-2006, 08:23 PM	#2
77 burb Registered User Join Date: Jun 2006 Location: stafford,Va Posts: 30	Re: 84 c20 burd drop?? if i z the frame what else needs to be done lower motor mounts,steering exhaust? I assume i will lose my inner fenders what else will need to be removed or moved also rad to motor what about hoses and ac lines __________________ *********************** 84 burb soon to bag and drop bagging it,shaving bumpers(f/r) shave tail lights(leds below tail gate) updated flat door handles(chevy) ************************ leblancinva@yahoo.com

12-09-2006, 02:19 PM	#3
77 burb Registered User Join Date: Jun 2006 Location: stafford,Va Posts: 30	Re: 84 c20 burd drop?? looks like i going to do a static drop for now what parts work best to get 3" spring 3" spindle 6-8"flip kit (want to sit low but level) going to run16" front 18" rear stealies __________________ *********************** 84 burb soon to bag and drop bagging it,shaving bumpers(f/r) shave tail lights(leds below tail gate) updated flat door handles(chevy) ************************ leblancinva@yahoo.com

12-09-2006, 03:09 PM	#4
XXL Señor Member Join Date: May 2002 Location: Edge of the world Posts: 5,367	Re: 84 c20 burd drop?? Is this the Haiku thread? __________________ Craigslist \| ebay \| Engrishtees \| www.myattitudesucks.com \| Follow me on Twitter

12-09-2006, 03:11 PM	#5
XXL Señor Member Join Date: May 2002 Location: Edge of the world Posts: 5,367	Re: 84 c20 burd drop?? I guess I should have said... Is this thread Haiku? Everything is in short bursts This line's meaningless __________________ Craigslist \| ebay \| Engrishtees \| www.myattitudesucks.com \| Follow me on Twitter

12-09-2006, 06:42 PM	#6
77 burb Registered User Join Date: Jun 2006 Location: stafford,Va Posts: 30	Re: 84 c20 burd drop?? lol just wanted to know what thing work together and what dont i'll try to keep it long lines for you to read ?if it matters 99% of the time truck will have 2 adults and six kids (750lbs total) 300lb front / 140 mid / 265 rear now im tring to draaaaaaaaaaaaaawwwww this out to fill space i dont think 400lbs in rear will change much I do my own work sold my yota's to build on my ex tox rig __________________ *********************** 84 burb soon to bag and drop bagging it,shaving bumpers(f/r) shave tail lights(leds below tail gate) updated flat door handles(chevy) ************************ leblancinva@yahoo.com

12-10-2006, 07:49 PM	#8
77 burb Registered User Join Date: Jun 2006 Location: stafford,Va Posts: 30	Re: 84 c20 burd drop?? well price in parts for static drop is about 3/4 the price of a full bag kit may just wait till spring and bag it airbagit kit was $1400 looked have every thing i need to bag it any body sell a better kit __________________ *********************** 84 burb soon to bag and drop bagging it,shaving bumpers(f/r) shave tail lights(leds below tail gate) updated flat door handles(chevy) ************************ leblancinva@yahoo.com

12-10-2006, 10:47 PM	#9
tom coop Registered User Join Date: Nov 2006 Location: memphis Posts: 98	Re: 84 c20 burd drop?? get suicide doors starter kit w 3/8 for 899 i think. you can do a different rear setup than me and it might be a little easier. in front just get sd. cups and cut them down a bit, and 3 " spindles. loose inner fenders. that should have you laying crossmember in front.

12-11-2006, 12:33 AM	#10
st1x10 Registered User Join Date: Feb 2006 Location: Oklahoma City Posts: 588	Re: 84 c20 burb drop?? ***************** is where its at. __________________ 1970 Chevy C10 "Under Construction" 2002 Chevy S10 V6

12-11-2006, 12:54 AM	#11
77 burb Registered User Join Date: Jun 2006 Location: stafford,Va Posts: 30	Re: 84 c20 burb drop?? tom coop post up when you do your front susp with pics how much do you cut out of the cups any pics or links what spindles are best for the price __________________ *********************** 84 burb soon to bag and drop bagging it,shaving bumpers(f/r) shave tail lights(leds below tail gate) updated flat door handles(chevy) ************************ leblancinva@yahoo.com

12-12-2006, 06:45 PM	#12
tom coop Registered User Join Date: Nov 2006 Location: memphis Posts: 98	Re: 84 c20 burb drop?? i wont cut my cups till i get spindles but i will post up pics. not sure how much im gonna cut yet and havent decided on spindles but im yhinking abouy djm Last edited by tom coop; 12-12-2006 at 06:47 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.