|
|
|
01-09-2007, 04:05 PM
|
#1 |
|
Registered User
Join Date: Feb 2003
Location: Calgary Canada
Posts: 556
|
Heater A/C housing?
I need a new housing for my Heater and don't know where to get one (other than from the wreckers or a parts truck) Does anyone know where i could buy one and how hard it would be to change out?
__________________
If you can't rock the roads with your bumpers 1/2" off the ground, you're nowhere near low enough! 
|
|
|
|
01-09-2007, 05:13 PM
|
#2 |
|
Registered User
Join Date: Apr 2003
Location: Oklahoma City
Posts: 605
|
Re: Heater A/C housing?
I am in the same perdicament. my is broken by the blower motor and you can find EVERY other piece of that system except the cases.
__________________
2008 Ford FX2 Screw 1971 C10 project in shop now! 2004 Pontiac Grandam (wifes) 2000 Cavalier z24 (gas saver) |
|
|
|
|
01-10-2007, 02:34 AM
|
#3 |
|
Until Seventy Times Seven
Join Date: Feb 2005
Location: Rocky Mountain Front Range
Posts: 1,301
|
Re: Heater A/C housing?
Like you mentioned, I guess only out of a parts truck. I haven't come across anyone that offers it (other than maybe the dealership).
It's not too difficult to replace. The nuts around the lower perimeter of the case near the fender are the toughest to get to, but can be had with a universal joint and a long extension bar. The toughest part for me was removing the heater hoses. I had to cut one of them off to get them off. Since you're replacing the case, you may want to consider replacing the heater core especially if it's the original. What's the condition of the blower motor as well?.
__________________
boxRODz 1983 C10 SWB Fleetside When two halves is gone, there's nuthin left. Two nothings is nuthin. That's mathematics son. You can argue with me but you can't argue with figures. Two half nothings is a whole nuthin... |
|
|
|
|
01-10-2007, 10:48 AM
|
#4 |
|
Registered User
Join Date: Feb 2003
Location: Calgary Canada
Posts: 556
|
Re: Heater A/C housing?
My fender wells are out so i'm hoping its not too hard to change. My tire hit the motor and busted it right off which in turn busted the housing so i will have to go with a new motor as well.
__________________
If you can't rock the roads with your bumpers 1/2" off the ground, you're nowhere near low enough!
|
|
|
|
|
01-10-2007, 11:16 AM
|
#5 |
|
Registered User
Join Date: Sep 2005
Location: Sun City West, Az
Posts: 3,822
|
Re: Heater A/C housing?
i got extra of everything else but the box.i just tore mine out,getting ready for vintage air.i ended up destroying mine in the demo process..can't wait for smooth firewall and getting rid of that eyesore in the corner.
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
