how do they do this

[cstm68]

how do they do this

http://vids.myspace.com/index.cfm?fu...eoid=626660553

[jimmydean]

The "smart" way to do it is to get drag blocks. Then just build your truck to lay out.



I think it's kinda cool and very stupid all at the same time.

[GREASEMONKEY72]

thats the best way to do it but you could also bolt on peices of steel to your frame and drag those to if you wanted but with the blocks youll get much brighter set of sparks which IMO looks alot better and if you do go this route make sure that the only thing draging is the blocks and not your actual frame or something else important that you dont want to be dragin


-steven

[hvychve]

just like those pocket rockets, they were cool at first , the law didnt know how to handle em, now thats illegal, Im sure a cop would have his hay day with these guys...........

[The Hard Way]

The orange sparks are iron, the white sparks are titanuim. Both make for some pretty cool photos.

[cstm68]

cool thax, im not gunna do that to my 68 but ive got an 85 s10 (my DD) i think that would look sick leaving the school parking lot

[FarmTruk]

Looks a little dangerous to me. I know I'd not want a bunch o' sparks flying all over/around my gas tank. Also, if the blocks are dragging, the tires will have limited traction. Looks like a big FUBAR getting ready to happen.

Cool song in the vid though...

[cstm68]

Originally Posted by FarmTruk

Looks a little dangerous to me. I know I'd not want a bunch o' sparks flying all over/around my gas tank. Also, if the blocks are dragging, the tires will have limited traction. Looks like a big FUBAR getting ready to happen.

Cool song in the vid though...

i get what yer saying and thats why im not doing it to my precious 68 swb but my cheep s10

[IvelDesigns]

more vids of layin frame here: http://surface-dvd.com/video.htm

[The Hard Way]

I was at Blood Drag 2006 in Florida, a kid's S-10 went up in flames while he was draggin it. It was a standard cab with three people in it, they all got out ok, but the truck was a total loss.

[bagged69c10]

The best way to do it is to drill 2 holes in your frame (usually toward the back of the cab) then run 2 grade 8 bolts thru and weld the inside head of the bolts. Then just make a template, take some angle iron and some like 2 inch solid square iron and weld the solid onto the angle then drill the holes from the template and bolt them up using a lockwasher.
Here is a clip of what can happen if you dont do it right.
http://www.dfwkustoms.com/forums/showthread.php?t=5660
FarmTruk was correct, but if you let it down just enough to drag you maintain alot more control.

[camaro__thunder]

drag door