putting 1 ton truckwheels under a C10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

watahyahknow · 02-17-2007, 09:57 AM

i have this 1986 C10 2 wheel drive that i want to put truckwheels under , not to realy up the loading capacity but more to make it look different.
im thinking on getting dropped spindles for a C30 and build those up with the C30 brakes and hubs .
does anyone know if i can mount the spindles on the C10 A arms if so wat parts need to be adapted and if not how mush of the frontsuspention do i need to chainge

watahyahknow · 02-19-2007, 07:20 PM

anyone?

Twisted78SS · 02-19-2007, 08:38 PM

I just cam across a site that sells adapters to go from 8 to 10 lug wheels, but not 5 to ten.

As for parts needed to swap, take a look through the LMC website and compare the part numbers for the different pieces like the spindle, a-arms etc... You most likely could swap in a complete loaded spindle with caliper, rotor and all. I would check just to be sure.

watahyahknow · 02-20-2007, 03:54 AM

ok thanks ..... i was wondering if the balljoints that mount the spindle on the a arms would fit the C30 spindle

laidout · 03-05-2007, 11:28 PM

try duallyscene.com that would be the best for your ?

watahyahknow · 03-06-2007, 04:31 AM

thank you so much

**N2TRUX** · 03-06-2007, 09:27 AM

The ball joints and tie rod ends aren't the same so you will have to change them. The C-10 A-arms are the same but the hole for the ball joint is smaller ( I think). You will have to change the A-arm or mod the hole to fit.

watahyahknow · 03-06-2007, 10:33 AM

now this is info i can use , i was wondering how far i needed to switch stuff around .
from the looks of i i might be better off with C30 upper and lower arms and fit lowered C30 spindles they WILL fit on the C10 crossmember .
i allso planned to get a complete delalum fiber bushingkit ...... i need to search a bit to see if there the same as for a C10 , logic tells me chevrolet makes them bigger for heavier capacity vehicles

02-17-2007, 09:57 AM	#1
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	putting 1 ton truckwheels under a C10 i have this 1986 C10 2 wheel drive that i want to put truckwheels under , not to realy up the loading capacity but more to make it look different. im thinking on getting dropped spindles for a C30 and build those up with the C30 brakes and hubs . does anyone know if i can mount the spindles on the C10 A arms if so wat parts need to be adapted and if not how mush of the frontsuspention do i need to chainge __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

02-19-2007, 07:20 PM	#2
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: putting 1 ton truckwheels under a C10 anyone? __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

02-19-2007, 08:38 PM	#3
Twisted78SS Wide n'Low Join Date: Jan 2007 Location: La Center, WA Posts: 1,511	Re: putting 1 ton truckwheels under a C10 I just cam across a site that sells adapters to go from 8 to 10 lug wheels, but not 5 to ten. As for parts needed to swap, take a look through the LMC website and compare the part numbers for the different pieces like the spindle, a-arms etc... You most likely could swap in a complete loaded spindle with caliper, rotor and all. I would check just to be sure.

02-20-2007, 03:54 AM	#4
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: putting 1 ton truckwheels under a C10 ok thanks ..... i was wondering if the balljoints that mount the spindle on the a arms would fit the C30 spindle __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

03-05-2007, 11:28 PM	#5
laidout Active Member Join Date: Feb 2004 Location: Bartlesville,ok Posts: 275	Re: putting 1 ton truckwheels under a C10 try duallyscene.com that would be the best for your ?

03-06-2007, 04:31 AM	#6
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: putting 1 ton truckwheels under a C10 thank you so much __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

03-06-2007, 09:27 AM	#7
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: putting 1 ton truckwheels under a C10 The ball joints and tie rod ends aren't the same so you will have to change them. The C-10 A-arms are the same but the hole for the ball joint is smaller ( I think). You will have to change the A-arm or mod the hole to fit. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

03-06-2007, 10:33 AM	#8
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: putting 1 ton truckwheels under a C10 now this is info i can use , i was wondering how far i needed to switch stuff around . from the looks of i i might be better off with C30 upper and lower arms and fit lowered C30 spindles they WILL fit on the C10 crossmember . i allso planned to get a complete delalum fiber bushingkit ...... i need to search a bit to see if there the same as for a C10 , logic tells me chevrolet makes them bigger for heavier capacity vehicles __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.