Gas Tank Conversion - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JIMBO59 · 03-10-2007, 09:18 PM

Like To Here What You Guys Did To Move Gas Tank To Rear Of Bed And What Type Of Tank They Used. Also Who They Purchased It From. Found A Lot Of Differant Prices And Need Some Help Making A Decision. Thanks,jimbo

texascowboy593 · 03-10-2007, 09:49 PM

Here's what I did... A little unconventional but it will work. Late 70's- early 80's full size Blazer tank (25 gal) from www.classicindustries.com It was around $100-120. $50 for the sending unit. I took the rear crossmember from an 80 Blazer frame and welded it in place of the rear original crossmember. This the oddball redneck approach...

texascowboy593 · 03-10-2007, 09:53 PM

BTW I fixed the fuel line in the last pic...

entourageguy · 03-10-2007, 10:52 PM

Used a Jaz tank
Moved the rear cross member back 4.5 inches so the fuel filler door would be between the bed cross members.

Brian ...

texascowboy593 · 03-11-2007, 01:57 AM

Oh yeah... Figured I should show you where I have the filler...

**BobTheTrucker** · 03-11-2007, 11:01 AM

Nice job guys.
I've heard of guys using a plastic or rubber cheaper tanks,
but I can't seem to find the link.
Does anyone have a source for that cheaper tank?

nogaroa4 · 03-12-2007, 09:41 AM

Quote:

Originally Posted by BobTheTrucker

Nice job guys.
I've heard of guys using a plastic or rubber cheaper tanks,
but I can't seem to find the link.
Does anyone have a source for that cheaper tank?

look at summit racing's website they have plastic tanks with sending units and foam for around 160

gen2guy · 03-14-2007, 12:21 AM

http://www.tanksinc.com/index.cfm/pa...prod/prd45.htm

looking for a tank 4 my self looks like this is the way to go

55dude · 03-16-2007, 11:27 PM

gotta luv that redneck tank conversion dude! put the money saved towards the upholstery bill!

**BobTheTrucker** · 03-22-2007, 07:56 AM

gen2guy,
The link showed a tank for a 1949-52 Chevrolet Passenger Car Polyethylene Tank. I have a 1957 Chevy truck. they show a stainless steel one for my truck model but not a Polyethylene Tank.
Do you know where I could find a Polyethylene Tank?

entourageguy · 03-22-2007, 05:44 PM

This is the one that I used

http://store.summitracing.com/partde...5&autoview=sku

Brian ...

JIMBO59 · 03-22-2007, 11:20 PM

DID IT BOLT RIGHT IN YOUR 59 OR DID YOU NEED TO DO MODIFICATIONS.THANKS,JIMBO

Quote:

Originally Posted by entourageguy

This is the one that I used

http://store.summitracing.com/partde...5&autoview=sku

Brian ...

entourageguy · 03-23-2007, 06:52 AM

Width is ok.
I moved the 1 rear frame brace between the spring perch 4.5" back so the filler would be betwen the box braces, also closer to the rear for filling. I then used the small brace for the spare tire for the forward mounting point. I used a billet gas door for a late model pickup as the access thru the floor. Only other thing I would do is to find a 3" extension for the filler on the tank to get it closer to the bed. The one on the tank is ok as is though. The tank could be spaced up a bit higher as well.
Brian ...

1-ton of fun · 03-23-2007, 10:33 AM

like this:
http://store.summitracing.com/partde...t=SUM%2D290200

gen2guy · 03-23-2007, 11:21 AM

I dont know if they make one i was going to ues the one i sent the link for becausr the deminsions were perfect for my 51 and i was juat going to fab up some brackets

**BobTheTrucker** · 03-24-2007, 08:31 PM

entourageguy, Do you have any pic. of your fuel cell job?

entourageguy · 03-24-2007, 09:21 PM

Quote:

Originally Posted by 1-ton of fun

like this:
http://store.summitracing.com/partde...t=SUM%2D290200

That the type of filler I was talking about. 4" I think is a bit long. I was planning on cutting about an 1" and getting it rewelded.

entourageguy, Do you have any pic. of your fuel cell job?
Bob there are some picks above but for some reason I never took a pic of the tank sitting in the bracket. I'll be pulling the bed off next week for the 4-link and I will update my pics then.

Brian ..

JIMBO59 · 03-28-2007, 11:18 PM

thanks for all the info and pics guys. i went with a ccp aluminium bolt in kit for 540.00.everything included for underbed tank conversion.

entourageguy · 03-29-2007, 02:47 AM

Don't forget the pictures

Brian

**BobTheTrucker** · 03-29-2007, 11:54 AM

texascowboy593 has a good idea there! 25 gal and not a lot of bucks. You only put fuel in it anyway. I like the extra weight of the extra gas when it's full. I'm not looking for a SHOW tank ! It's under the truck out of sight. I'm not going to ask people to look at my gas tank! The Polyethylene Tank could bust easer than a metal one, so I've read. The others cost toooo much for me. My other trucks have a tank like that. It'll be there for many years.

Hay! texascowboy593 my son is in the PBR, Making good riding bulls.

jkaylor68gmc · 03-29-2007, 11:58 AM

Check out Kustom Tanks

JIMBO59 · 03-29-2007, 12:52 PM

Well The Frame Was Already Done When I Realized I Might Have To Move A Crossmember To Install A Tank.rather Than Mess Up My Pretty Frame Rails I Spent The Extra Money.they Are Only Coupons And You Cant Take`em With You,lol. I Will Post Pics When I Do The Install.

03-10-2007, 09:18 PM	#1
JIMBO59 APACHE CLUB Join Date: Jul 2006 Location: FORT WORTH, TEXAS Posts: 144	Gas Tank Conversion Like To Here What You Guys Did To Move Gas Tank To Rear Of Bed And What Type Of Tank They Used. Also Who They Purchased It From. Found A Lot Of Differant Prices And Need Some Help Making A Decision. Thanks,jimbo __________________ JIMBO59CHEVY

03-10-2007, 09:49 PM	#2
texascowboy593 Registered User Join Date: Dec 2004 Location: Southeast Tx Posts: 1,302	Re: Gas Tank Conversion Here's what I did... A little unconventional but it will work. Late 70's- early 80's full size Blazer tank (25 gal) from www.classicindustries.com It was around $100-120. $50 for the sending unit. I took the rear crossmember from an 80 Blazer frame and welded it in place of the rear original crossmember. This the oddball redneck approach... Attached Images __________________ "The rays of light thru the Shiner Bock bottle make me wanna turn the key and put down the throttle...and get lost down 35" - Jason Boland www.YouTube.com/user/593Films - Watch My Videos! 1977 Silverado K10 2014 Dodge Durango (Wife-mobile) 2008 Dodge Ram Lone Star Edition (Daily driver)

03-10-2007, 09:53 PM	#3
texascowboy593 Registered User Join Date: Dec 2004 Location: Southeast Tx Posts: 1,302	Re: Gas Tank Conversion BTW I fixed the fuel line in the last pic... Attached Images __________________ "The rays of light thru the Shiner Bock bottle make me wanna turn the key and put down the throttle...and get lost down 35" - Jason Boland www.YouTube.com/user/593Films - Watch My Videos! 1977 Silverado K10 2014 Dodge Durango (Wife-mobile) 2008 Dodge Ram Lone Star Edition (Daily driver)

03-10-2007, 10:52 PM	#4
entourageguy Yellow truck club Join Date: Apr 2006 Location: Barrie Ontario Posts: 2,080	Re: Gas Tank Conversion Used a Jaz tank Moved the rear cross member back 4.5 inches so the fuel filler door would be between the bed cross members. Brian ... Attached Images __________________ ................................................................ Brian ...... My hub garage address http://www.hubgarage.com/mygarage/59apache I gue$$ everything has it'$ price ALL GONE NOW *59 Chev Apache* *PRAISE THE LOWERED* 350 700r lokar shifter power MII front end, shockwaves tilt, 4 wheel discs 4-link and bags 10 bolt limited

03-11-2007, 01:57 AM	#5
texascowboy593 Registered User Join Date: Dec 2004 Location: Southeast Tx Posts: 1,302	Re: Gas Tank Conversion Oh yeah... Figured I should show you where I have the filler... Attached Images __________________ "The rays of light thru the Shiner Bock bottle make me wanna turn the key and put down the throttle...and get lost down 35" - Jason Boland www.YouTube.com/user/593Films - Watch My Videos! 1977 Silverado K10 2014 Dodge Durango (Wife-mobile) 2008 Dodge Ram Lone Star Edition (Daily driver)

03-11-2007, 11:01 AM	#6
BobTheTrucker Registered User Join Date: Feb 2006 Location: South Louisiana Posts: 87	Re: Gas Tank Conversion Nice job guys. I've heard of guys using a plastic or rubber cheaper tanks, but I can't seem to find the link. Does anyone have a source for that cheaper tank? __________________ 1955 Chevy truck ( SOLD ) 1955 3/4 ton parts truck. 1957 Chevy truck 1995 S10 Chevy truck 1999 ext cab Chevy truck, w/1998 body style. (for parts) 1964 Honda 90 2003 Ultra Classic Harley

03-14-2007, 12:21 AM	#8
gen2guy Registered User Join Date: Jan 2005 Location: mlwaukee wis Posts: 22	Re: Gas Tank Conversion http://www.tanksinc.com/index.cfm/pa...prod/prd45.htm looking for a tank 4 my self looks like this is the way to go

03-16-2007, 11:27 PM	#9
55dude Registered User Join Date: Jan 2007 Location: tacoma wa. Posts: 1,037	Re: Gas Tank Conversion gotta luv that redneck tank conversion dude! put the money saved towards the upholstery bill!

03-22-2007, 07:56 AM	#10
BobTheTrucker Registered User Join Date: Feb 2006 Location: South Louisiana Posts: 87	Re: Gas Tank Conversion gen2guy, The link showed a tank for a 1949-52 Chevrolet Passenger Car Polyethylene Tank. I have a 1957 Chevy truck. they show a stainless steel one for my truck model but not a Polyethylene Tank. Do you know where I could find a Polyethylene Tank? __________________ 1955 Chevy truck ( SOLD ) 1955 3/4 ton parts truck. 1957 Chevy truck 1995 S10 Chevy truck 1999 ext cab Chevy truck, w/1998 body style. (for parts) 1964 Honda 90 2003 Ultra Classic Harley

03-22-2007, 05:44 PM	#11
entourageguy Yellow truck club Join Date: Apr 2006 Location: Barrie Ontario Posts: 2,080	Re: Gas Tank Conversion This is the one that I used http://store.summitracing.com/partde...5&autoview=sku Brian ... __________________ ................................................................ Brian ...... My hub garage address http://www.hubgarage.com/mygarage/59apache I gue$$ everything has it'$ price ALL GONE NOW *59 Chev Apache* *PRAISE THE LOWERED* 350 700r lokar shifter power MII front end, shockwaves tilt, 4 wheel discs 4-link and bags 10 bolt limited

03-23-2007, 06:52 AM	#13
entourageguy Yellow truck club Join Date: Apr 2006 Location: Barrie Ontario Posts: 2,080	Re: Gas Tank Conversion Width is ok. I moved the 1 rear frame brace between the spring perch 4.5" back so the filler would be betwen the box braces, also closer to the rear for filling. I then used the small brace for the spare tire for the forward mounting point. I used a billet gas door for a late model pickup as the access thru the floor. Only other thing I would do is to find a 3" extension for the filler on the tank to get it closer to the bed. The one on the tank is ok as is though. The tank could be spaced up a bit higher as well. Brian ... Attached Images __________________ ................................................................ Brian ...... My hub garage address http://www.hubgarage.com/mygarage/59apache I gue$$ everything has it'$ price ALL GONE NOW *59 Chev Apache* *PRAISE THE LOWERED* 350 700r lokar shifter power MII front end, shockwaves tilt, 4 wheel discs 4-link and bags 10 bolt limited

03-23-2007, 10:33 AM	#14
1-ton of fun polishing a turd Join Date: Dec 2004 Location: houston, tx Posts: 674	Re: Gas Tank Conversion like this: http://store.summitracing.com/partde...t=SUM%2D290200 __________________ 59 chevy apache 31 4x4 - my project: http://67-72chevytrucks.com/vboard/s....php?p=8668512 53 buick special - straight 8 sled - blow through turbo 47 gmc - flatbed hot rod build 99 ford econoline e350 - 4x4 converted family roadtrip/overlanding rig AKA 'Monstervan' AKA 'Daddy-Van'

03-23-2007, 11:21 AM	#15
gen2guy Registered User Join Date: Jan 2005 Location: mlwaukee wis Posts: 22	Re: Gas Tank Conversion I dont know if they make one i was going to ues the one i sent the link for becausr the deminsions were perfect for my 51 and i was juat going to fab up some brackets

03-24-2007, 08:31 PM	#16
BobTheTrucker Registered User Join Date: Feb 2006 Location: South Louisiana Posts: 87	Re: Gas Tank Conversion entourageguy, Do you have any pic. of your fuel cell job? __________________ 1955 Chevy truck ( SOLD ) 1955 3/4 ton parts truck. 1957 Chevy truck 1995 S10 Chevy truck 1999 ext cab Chevy truck, w/1998 body style. (for parts) 1964 Honda 90 2003 Ultra Classic Harley

03-28-2007, 11:18 PM	#18
JIMBO59 APACHE CLUB Join Date: Jul 2006 Location: FORT WORTH, TEXAS Posts: 144	Re: Gas Tank Conversion thanks for all the info and pics guys. i went with a ccp aluminium bolt in kit for 540.00.everything included for underbed tank conversion. __________________ JIMBO59CHEVY



Register or Log In To remove these advertisements.

03-29-2007, 02:47 AM	#19
entourageguy Yellow truck club Join Date: Apr 2006 Location: Barrie Ontario Posts: 2,080	Re: Gas Tank Conversion Don't forget the pictures Brian __________________ ................................................................ Brian ...... My hub garage address http://www.hubgarage.com/mygarage/59apache I gue$$ everything has it'$ price ALL GONE NOW *59 Chev Apache* *PRAISE THE LOWERED* 350 700r lokar shifter power MII front end, shockwaves tilt, 4 wheel discs 4-link and bags 10 bolt limited

03-29-2007, 11:54 AM	#20
BobTheTrucker Registered User Join Date: Feb 2006 Location: South Louisiana Posts: 87	Re: Gas Tank Conversion texascowboy593 has a good idea there! 25 gal and not a lot of bucks. You only put fuel in it anyway. I like the extra weight of the extra gas when it's full. I'm not looking for a SHOW tank ! It's under the truck out of sight. I'm not going to ask people to look at my gas tank! The Polyethylene Tank could bust easer than a metal one, so I've read. The others cost toooo much for me. My other trucks have a tank like that. It'll be there for many years. Hay! texascowboy593 my son is in the PBR, Making good riding bulls. __________________ 1955 Chevy truck ( SOLD ) 1955 3/4 ton parts truck. 1957 Chevy truck 1995 S10 Chevy truck 1999 ext cab Chevy truck, w/1998 body style. (for parts) 1964 Honda 90 2003 Ultra Classic Harley

03-29-2007, 11:58 AM	#21
jkaylor68gmc Senior Member Join Date: Dec 2005 Location: TN Posts: 2,448	Re: Gas Tank Conversion Check out Kustom Tanks

03-29-2007, 12:52 PM	#22
JIMBO59 APACHE CLUB Join Date: Jul 2006 Location: FORT WORTH, TEXAS Posts: 144	Re: Gas Tank Conversion Well The Frame Was Already Done When I Realized I Might Have To Move A Crossmember To Install A Tank.rather Than Mess Up My Pretty Frame Rails I Spent The Extra Money.they Are Only Coupons And You Cant Take`em With You,lol. I Will Post Pics When I Do The Install. __________________ JIMBO59CHEVY

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.