Best place to get reproduction parts for an 84??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**bigunde** · 03-11-2007, 10:32 AM

Just picked up an 84 Chevy and will be needing a few parts for it.Which vendors are most common with these year models?Thanks

**old Rusty C10** · 03-11-2007, 11:47 AM

from being on this board for years i feel its a matter of opinion. I have heard good things about LMC Goodmark and all the other parts suppliers yet as one or two rave about good quality and fit, others will say that the same supplier sold thre garbage. Personally I use my trucks for work. As long as they are running, Im not too concerned what they look like. The one truck i did restore i was picking up parts all over. I found that with tweaking and all even the korean parts worked ok. You gotta remember that your truck is 23 years old its not as solid as when it left the factory stuff has shifted a bit and it takes time to shim properly etc.
Id go for the Goodmark ( it appears to be the best from what I hear) if its a show truck otherwise id get korean

Duro5341 · 03-11-2007, 12:44 PM

I usually call our local jobber.......he has yet to be stumped on a part he can't get me. There all decent quality....but I pay for it

Stay away from white box crap, and always insist on new if you can get it

As for body parts, I have always had success with Cross Canada, through the same jobber.....everything so far fits really good, and there is quite a selection for our trucks. Then there is always the pick-ur-own yards, for some gently used delco parts that are hard to find, or options that didn't come on your truck

Duro

Malo83 · 03-11-2007, 12:53 PM

I have heard good and bad from all vendors

, but most of the time parts are usually pretty good, i've had good luck with both LMC and Classic Parts. And they will send you a free catalog as well as Brothers

John
www.ClassicParts.com
www.LMCTruck.com
www.BrothersTrucks.com

**bigunde** · 03-11-2007, 01:11 PM

Thank you very much for all the replies.I will look into all of them..

thump16 · 03-11-2007, 01:50 PM

where are you located in south georgia? The area that I am in has quite a few salvage yards with decent parts.

**Captkaos** · 03-12-2007, 03:11 PM

I sell reproduction parts on the board. There is a complete vendor list on here also.

03-11-2007, 10:32 AM	#1
bigunde Rusty Rockerfeller Join Date: May 2003 Location: South Georgia Posts: 1,631	Best place to get reproduction parts for an 84??? Just picked up an 84 Chevy and will be needing a few parts for it.Which vendors are most common with these year models?Thanks

03-11-2007, 11:47 AM	#2
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	Re: Best place to get reproduction parts for an 84??? from being on this board for years i feel its a matter of opinion. I have heard good things about LMC Goodmark and all the other parts suppliers yet as one or two rave about good quality and fit, others will say that the same supplier sold thre garbage. Personally I use my trucks for work. As long as they are running, Im not too concerned what they look like. The one truck i did restore i was picking up parts all over. I found that with tweaking and all even the korean parts worked ok. You gotta remember that your truck is 23 years old its not as solid as when it left the factory stuff has shifted a bit and it takes time to shim properly etc. Id go for the Goodmark ( it appears to be the best from what I hear) if its a show truck otherwise id get korean __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

03-11-2007, 12:44 PM	#3
Duro5341 Registered User Join Date: Dec 2006 Location: Earth Posts: 239	Re: Best place to get reproduction parts for an 84??? I usually call our local jobber.......he has yet to be stumped on a part he can't get me. There all decent quality....but I pay for it Stay away from white box crap, and always insist on new if you can get it As for body parts, I have always had success with Cross Canada, through the same jobber.....everything so far fits really good, and there is quite a selection for our trucks. Then there is always the pick-ur-own yards, for some gently used delco parts that are hard to find, or options that didn't come on your truck Duro

03-11-2007, 12:53 PM	#4
Malo83 Cruzzzn' Vet Join Date: Jan 2005 Location: Porterville,Ca. Posts: 1,918	Re: Best place to get reproduction parts for an 84??? I have heard good and bad from all vendors , but most of the time parts are usually pretty good, i've had good luck with both LMC and Classic Parts. And they will send you a free catalog as well as Brothers John www.ClassicParts.com www.LMCTruck.com www.BrothersTrucks.com

03-11-2007, 01:11 PM	#5
bigunde Rusty Rockerfeller Join Date: May 2003 Location: South Georgia Posts: 1,631	Re: Best place to get reproduction parts for an 84??? Thank you very much for all the replies.I will look into all of them..

03-11-2007, 01:50 PM	#6
thump16 Registered User Join Date: Jul 2005 Location: Valdosta GA Posts: 708	Re: Best place to get reproduction parts for an 84??? where are you located in south georgia? The area that I am in has quite a few salvage yards with decent parts.

03-12-2007, 03:11 PM	#7
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Re: Best place to get reproduction parts for an 84??? I sell reproduction parts on the board. There is a complete vendor list on here also. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.