Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
05-03-2007, 09:21 PM | #1 |
Registered User
Join Date: Apr 2007
Location: Virginia
Posts: 547
|
72 K20 build thread, Major Update
Hi everyone. I've been a member on this site for a couple of years now but recently changed my username (used to be Madbomber88). I have a 72 K20 and a 71 K5.
I'm finally biting the bullet and jumping in with both feet on a frame off restoration/modification of the K20. It began tonight! This will be a long and most likely slow process, but here's my original intent (subject to change due to budget constraints of course). Goal is a stockish looking 72 on the outside with the technology on the inside to be a 100% reliable daily driver. - New GM PP 383 mated to some TBD Fuel Injection - NV4500 conversion - Trying to keep the same basic color scheme but am open to all ideas (please!) - Relocate fuel tank to under bed - Update interior for comfort and convenience - The rest is up in the air, but basically take everything apart, clean, paint, protect and put back together - Keeping the new 14B FF with limited slip in the rear and the newly rebuilt D44 in front (both are 3.42s) Wish me luck, and I'll do my best to post everything I do, and I welcome any and all comments, both the good, bad and the ugly. -Tim Before pics...
__________________
Maj USAF 71 K5 Blazer CST 72 K20 HT383 NV4500 Mass-Flo EFI 71 K10 LWB 52 Dodge Power Wagon 67 Dodge WM300 Power Wagon 48 Dodge WDX Power Wagon My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=239487 Last edited by Rust Buster; 06-27-2014 at 12:31 PM. Reason: Error |
05-03-2007, 09:23 PM | #2 |
Registered User
Join Date: Apr 2007
Location: Virginia
Posts: 547
|
Re: 72 K20 build thread, need good name
Ok, now the first actual build post (although not much)
Shut off the engine for the last time, and put her up on those wheel dollies. The garage is relatively small, and this will allow me to push it agains the wall when I need the room. So far so good, but it takes alot of force to push her around, alot more so than advertised. Anyone have a good name for this build?
__________________
Maj USAF 71 K5 Blazer CST 72 K20 HT383 NV4500 Mass-Flo EFI 71 K10 LWB 52 Dodge Power Wagon 67 Dodge WM300 Power Wagon 48 Dodge WDX Power Wagon My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=239487 |
05-03-2007, 09:32 PM | #3 |
Aluminum slot wheels rule...
Join Date: Jan 2006
Location: Maine
Posts: 6,211
|
Re: 72 K20 build thread, need good name
Looks like a nice project! I have 3 questions though, what size tires are those, and what kind of rims are those/ what did they come off of or where did you get them? they look cool, almost like a Chrysler rallye-style wheel.
|
05-03-2007, 09:35 PM | #4 |
Registered User
Join Date: Apr 2007
Location: Virginia
Posts: 547
|
Re: 72 K20 build thread, need good name
The tires are 285/75/16s on the original rims that came with the truck. I've never thought about them before, I always thought they were just the originals. You think they may not be? Haven't decided if I will keep them or not...
__________________
Maj USAF 71 K5 Blazer CST 72 K20 HT383 NV4500 Mass-Flo EFI 71 K10 LWB 52 Dodge Power Wagon 67 Dodge WM300 Power Wagon 48 Dodge WDX Power Wagon My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=239487 |
05-03-2007, 09:35 PM | #5 |
Registered User
Join Date: Apr 2007
Location: Virginia
Posts: 547
|
Re: 72 K20 build thread, need good name
Jake,
whereabouts in Maine are you? I have family in both Portland (he owns a chevy dealership), and Kennebunk
__________________
Maj USAF 71 K5 Blazer CST 72 K20 HT383 NV4500 Mass-Flo EFI 71 K10 LWB 52 Dodge Power Wagon 67 Dodge WM300 Power Wagon 48 Dodge WDX Power Wagon My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=239487 Last edited by Rust Buster; 04-19-2008 at 03:45 AM. Reason: error |
05-03-2007, 09:52 PM | #6 | |
The Older Generation
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,779
|
Re: 72 K20 build thread, need good name
Quote:
LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
|
05-03-2007, 09:44 PM | #7 |
Registered User
Join Date: Mar 2006
Location: USA
Posts: 21,019
|
Re: 72 K20 build thread, need good name
Well,they arent the stock rims for the era,thats for sure.Nice Project.I remember when mine went on the dollies so it could be moved around,now the tires are too wide for them...
|
05-03-2007, 09:47 PM | #8 |
Special Order
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,851
|
Re: 72 K20 build thread, need good name
Ahhhh yup,got people in Bideford Pool,right between them the two,I do.Those are Dodge wheels,like-em.
Cheyenne K.How`s that?
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
05-03-2007, 09:48 PM | #9 |
Aluminum slot wheels rule...
Join Date: Jan 2006
Location: Maine
Posts: 6,211
|
Re: 72 K20 build thread, need good name
No, those aren't original 1972 rims, they look damned cool IMO though. I'm about 3 hours up from Sanford, on the coast. (don't want to give out my town name, people will start stalking me. j/k)
Those are Dodge rims, Tim? Last edited by JAKES 68GMC; 05-03-2007 at 09:49 PM. |
05-03-2007, 09:59 PM | #10 |
Son of a gun
Join Date: Jan 2007
Location: Hot Springs, Arkansas
Posts: 1,636
|
Re: 72 K20 build thread, need good name
this is the only type of wheel I have ever known to be called a Chrysler Rallye. Those on the 39 ford look like a Chevy rally to me The truck wheels do look like the Chry wheels...I love em.
I love the truck by the way! Totally awesome
__________________
Bill BEATERS ARE NEATER Last edited by Bus Ted Knuckle; 05-03-2007 at 10:40 PM. |
05-04-2007, 01:46 PM | #11 |
The Older Generation
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,779
|
Re: 72 K20 build thread, need good name
Nope, they are off of a 1976 Chrysler Cordoba and are a 5" x 4 1/2" bolt pattern (Ford 9" rear)
LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - Last edited by LockDoc; 05-04-2007 at 01:46 PM. |
05-03-2007, 10:03 PM | #12 |
Registered User
Join Date: Jul 2006
Location: Central PA
Posts: 12,201
|
Re: 72 K20 build thread, need good name
nice truck... I like the original looking paint, what size tires are those?
__________________
The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" |
05-03-2007, 10:18 PM | #13 |
Registered User
Join Date: Apr 2007
Location: Virginia
Posts: 547
|
Re: 72 K20 build thread, need good name
Mike, they're 285/75/16s. I like the height of them but I wish they were a bit wider to get the stance right.
__________________
Maj USAF 71 K5 Blazer CST 72 K20 HT383 NV4500 Mass-Flo EFI 71 K10 LWB 52 Dodge Power Wagon 67 Dodge WM300 Power Wagon 48 Dodge WDX Power Wagon My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=239487 |
05-03-2007, 10:06 PM | #14 |
Aluminum slot wheels rule...
Join Date: Jan 2006
Location: Maine
Posts: 6,211
|
Re: 72 K20 build thread, need good name
They look a little like what Bus Ted Knuckle posted. They have a similar resemblence anyway.
|
05-03-2007, 10:24 PM | #15 |
Registered User
Join Date: Jul 2006
Location: Central PA
Posts: 12,201
|
Re: 72 K20 build thread, need good name
285/75/16 (32.9x10.3)
Those are the same size as mine, backspacing helps a little but my truck is a SWB so they fit a little better... Yours don't look bad ...
__________________
The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" Last edited by msgross; 05-03-2007 at 10:24 PM. |
05-03-2007, 10:25 PM | #16 |
Special Order
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,851
|
Re: 72 K20 build thread, need good name
You could mount the 285s on 8" rims to get your results.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
05-03-2007, 10:26 PM | #17 |
Registered User
Join Date: Jul 2006
Location: Central PA
Posts: 12,201
|
Re: 72 K20 build thread, need good name
mine are one 15x8's they are 33" x 10.5"
__________________
The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" |
05-03-2007, 11:43 PM | #18 |
Account Suspended
Join Date: Nov 2004
Location: Deer Park, Tx.
Posts: 2,522
|
Re: 72 K20 build thread, need good name
Is that supposed to be an 8 lug truck? "Project long wait 4x4"
|
05-04-2007, 07:40 AM | #19 |
Registered User
Join Date: Apr 2007
Location: Virginia
Posts: 547
|
Re: 72 K20 build thread, need good name
Yes, it's an 8 lug from the factory. I bought it from a farmer in TN and it had been mainly used on the farm its whole life. It had the Eaton HO52 when I got it and gears that were way too tall. I couldn't even drive the thing on the highway, so I got a new 14bolt FF with an eaton limited slip and 3.42s. I love it. Still have the eaton and it is in great shape with a locker if anytone is interested
__________________
Maj USAF 71 K5 Blazer CST 72 K20 HT383 NV4500 Mass-Flo EFI 71 K10 LWB 52 Dodge Power Wagon 67 Dodge WM300 Power Wagon 48 Dodge WDX Power Wagon My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=239487 |
05-04-2007, 09:18 AM | #20 |
Special Order
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,851
|
Re: 72 K20 build thread, need good name
You mean the gears were too low,right.Tall gears are high gears as in a lower ratio/lower numbers.
I`m interested in the rear.I`m having problems with a locker and parts are...tough.Do you know the ratio?Let me know about it.thanks.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
05-04-2007, 09:32 AM | #21 |
Registered User
Join Date: Apr 2007
Location: Virginia
Posts: 547
|
Re: 72 K20 build thread, need good name
Pretty sure the gears were 4:10s
__________________
Maj USAF 71 K5 Blazer CST 72 K20 HT383 NV4500 Mass-Flo EFI 71 K10 LWB 52 Dodge Power Wagon 67 Dodge WM300 Power Wagon 48 Dodge WDX Power Wagon My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=239487 |
05-04-2007, 02:04 PM | #22 |
Special Order
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,851
|
Re: 72 K20 build thread, need good name
Mopar had an almost identical rim to the truck rallyes and they had chrome centers.Truck 8-lugs are in another class and those are Dodge.
4.10 would suit me fine.That`s what my rear is,so no set-up would be required.Send me a message if you`d like to get rid of that.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 05-04-2007 at 02:06 PM. |
05-04-2007, 02:23 PM | #23 |
Too many trucks? Nah...
Join Date: Mar 2002
Location: SW Washington State
Posts: 154
|
Re: 72 K20 build thread, need good name
Hugger Orange and White is the best color combo GM used, imo. That's going to be a great build, cannot wait to see more.
Those dollies are great, but not nearly as simple to move around as they make you think. It takes two of us to move my Dad's '69 AMC AMX around on them. |
05-04-2007, 04:14 PM | #24 |
Registered User
Join Date: Mar 2007
Location: Tyler, Texas
Posts: 559
|
Re: 72 K20 build thread, need good name
since this will be your last project as a single man how about project "The Last Bachelor" or maybe "Project Ball & Chain"
or using a theme relating to the truck how about project... "Citrus Resurrection", "Orange & White Dine-O-Mite", or "K20 Too Tho'ed" lol. just a little brain storming |
05-04-2007, 06:33 PM | #25 |
Registered User
Join Date: Dec 2006
Location: CA
Posts: 331
|
Re: 72 K20 build thread, need good name
do you know the width of the rim that's on there now? I like the look. Nice truck by the way. Great ideas on the new parts too.
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|