Anyone need any GM part #'s checked? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Sadsack · 05-28-2007, 08:41 PM

I work in a GM dealership in parts and can get most things at or just barely above cost...to an extent! LOL Anyone need anything? Let me know!

**too much stuff** · 05-28-2007, 09:10 PM

Can you run a part number to see what it fits? If so,3928487 GR 12.116 It is a mldg unit. I won it on e-bay as a truck part, but pretty sure its not. Eric

Sadsack · 05-28-2007, 09:56 PM

Quote:

Originally Posted by too much stuff

Can you run a part number to see what it fits? If so,3928487 GR 12.116 It is a mldg unit. I won it on e-bay as a truck part, but pretty sure its not. Eric

Ill check for you tomorrow man and get back to you!

johnyreb · 05-28-2007, 10:21 PM

what about a fuel pump for a 67 GMC 305 E V6 ? A part number would be so great !!
Thanks,
John

Sadsack · 05-28-2007, 10:24 PM

Quote:

Originally Posted by johnyreb

what about a fuel pump for a 67 GMC 305 E V6 ? A part number would be so great !!
Thanks,
John

Ill check my Old catalogs johny...hoping they go back that far...if not Ill call my AC Delco rep. She's always a helpful gal! Ill get back to you tomorrow!

timcos · 05-28-2007, 10:29 PM

Do they have a bed floor replacement for a 72 Shortbed Fleetside?

Sadsack · 05-28-2007, 10:34 PM

Now that one I can confidently say No. Sorry Timcos! If I could get them....my barn and shop would be full!

Americanrider · 05-29-2007, 12:05 AM

Can you check on Dana 60 4x4 front hubs for a 1985 single wheel 1 ton? I was told that GM does not carry them any more. Thanksabunch !

snj8198 · 05-29-2007, 12:15 AM

Quote:

Originally Posted by Americanrider

Can you check on Dana 60 4x4 front hubs for a 1985 single wheel 1 ton? I was told that GM does not carry them any more. Thanksabunch !

Good question!

Sadsack · 05-29-2007, 02:36 PM

[QUOTE=Americanrider;2195927]Can you check on Dana 60 4x4 front hubs for a 1985 single wheel 1 ton? I was told that GM does not carry them any more. Thanksabunch ![/QUOTETHE BEST I CAN FIND ON THEM...YOU ARE RIGHT. THEY ARENT AVAILABLE FROM GM ANYMORE. SORRY!

killer71 · 05-29-2007, 12:10 AM

Would you know if you can still get the tailgate band trim? You know the molding that says "chevrolet" or "GMC"! Curious if you could still get it through you guys if ya got time. Thanks!

Sadsack · 05-29-2007, 02:36 PM

Quote:

Originally Posted by killer71

Would you know if you can still get the tailgate band trim? You know the molding that says "chevrolet" or "GMC"! Curious if you could still get it through you guys if ya got time. Thanks!

SORRY...NO LONGER AVAILABLE.

Sadsack · 05-29-2007, 02:37 PM

HELP ME HELP ME!

**special-K** · 05-29-2007, 07:12 AM

Man...I think you opened a big can of worms

.

BACKYARD88 · 05-29-2007, 09:45 AM

killer71 · 05-29-2007, 10:14 AM

Yes Sir he did! He's a young man he can handle it! lol.

killer71 · 05-29-2007, 03:21 PM

thanks for your time!

johnyreb · 05-29-2007, 05:31 PM

Probably no luck on the 1967 305 E V6 GMC fuel pump either huh?
Not many people could imagine the headache trying to find correct fuel pump for this truck !!!!!

Thanks
John

creeldaddy · 05-29-2007, 05:43 PM

how much would this cost

BACKYARD88 · 05-29-2007, 06:13 PM

Quote:

Originally Posted by johnyreb

Probably no luck on the 1967 305 E V6 GMC fuel pump either huh?
Not many people could imagine the headache trying to find correct fuel pump for this truck !!!!!

Thanks
John

I'll try and help out some. This is how it's worded in the book:
63-68 FFC (6cyl).....
63-67 Ser. 20-30 (D-D) (exc. Diesel).....
68 D-D...................................................5621855 (stamped 6603)
Number isn't any good for GM anymore though. Maybe it'll help a little.

JHART · 05-31-2007, 11:14 AM

I was given a transmission from a buddy of mine and i wanted to have the numbers crossed to be sure its the right one.

The numbers off the case are 8685060. I just want to be sure its the right tranny.

Any help would be awesome!

-Hart

BLACK AND BLUE 67-72 · 05-31-2007, 12:59 PM

On the 305v6 there are 3 different pumps, the part #'s for them are M348, M3955, and M3987 they are Carter #'s

BACKYARD88 · 05-31-2007, 02:52 PM

Quote:

Originally Posted by JHART

I was given a transmission from a buddy of mine and i wanted to have the numbers crossed to be sure its the right one.

The numbers off the case are 8685060. I just want to be sure its the right tranny.

Any help would be awesome!

-Hart

I don't have any way to cross casting numbers but if you can tell me what it came out of and what's going in I can tell you if it'll work.

Southedisto · 05-31-2007, 04:33 PM

How about inner axle shafts (35 spline, Dana 60 srw axle) for an 86 K30, also ujoints for the same axle (should be 1480). Thanks

JHART · 05-31-2007, 04:43 PM

Quote:

Originally Posted by BACKYARD88

I don't have any way to cross casting numbers but if you can tell me what it came out of and what's going in I can tell you if it'll work.

I dont know what it came out of ..... i want to put it in my truck with the 5.3 but i need to know if its 4L60E.

05-28-2007, 08:41 PM	#1
Sadsack Registered User Join Date: May 2007 Location: East TN Posts: 171	Anyone need any GM part #'s checked? I work in a GM dealership in parts and can get most things at or just barely above cost...to an extent! LOL Anyone need anything? Let me know! Last edited by Sadsack; 05-28-2007 at 10:07 PM.

05-28-2007, 09:10 PM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,854	Re: Anyone need any GM part #'s checked? Can you run a part number to see what it fits? If so,3928487 GR 12.116 It is a mldg unit. I won it on e-bay as a truck part, but pretty sure its not. Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

05-28-2007, 10:21 PM	#4
johnyreb Registered User Join Date: Apr 2007 Location: Springdale, Arkansas Posts: 12	Re: Anyone need any GM part #'s checked? what about a fuel pump for a 67 GMC 305 E V6 ? A part number would be so great !! Thanks, John __________________ 1967 GMC Longbed 305E V6 3 on the tree

05-28-2007, 10:29 PM	#6
timcos Chief Honcho In Charge Join Date: Aug 2006 Location: Bentonville AR Posts: 970	Re: Anyone need any GM part #'s checked? Do they have a bed floor replacement for a 72 Shortbed Fleetside? __________________ 1992 1500 4x4 Shortbed 1984 Ford F250 Supercab Longbed 6.9L Diesel 1972 K10 Cheyenne Super Fleetside Short Bed - 350 - A/C 1971 VW SuperBeetle 1960 Wife 1984 Son 1986 Son 1989 Son Previous Trucks 1967 C10 SWB (1980-1981) 1971 C10 LWB (1998-2004)

05-28-2007, 10:34 PM	#7
Sadsack Registered User Join Date: May 2007 Location: East TN Posts: 171	Re: Anyone need any GM part #'s checked? Now that one I can confidently say No. Sorry Timcos! If I could get them....my barn and shop would be full! Last edited by Sadsack; 05-28-2007 at 10:35 PM.

05-29-2007, 12:05 AM	#8
Americanrider Registered User Join Date: Dec 2004 Location: NW, WA. Posts: 1,421	Re: Anyone need any GM part #'s checked? Can you check on Dana 60 4x4 front hubs for a 1985 single wheel 1 ton? I was told that GM does not carry them any more. Thanksabunch ! Attached Images

05-29-2007, 02:36 PM	#10
Sadsack Registered User Join Date: May 2007 Location: East TN Posts: 171	Re: Anyone need any GM part #'s checked? [QUOTE=Americanrider;2195927]Can you check on Dana 60 4x4 front hubs for a 1985 single wheel 1 ton? I was told that GM does not carry them any more. Thanksabunch ![/QUOTETHE BEST I CAN FIND ON THEM...YOU ARE RIGHT. THEY ARENT AVAILABLE FROM GM ANYMORE. SORRY!

05-29-2007, 12:10 AM	#11
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: Anyone need any GM part #'s checked? Would you know if you can still get the tailgate band trim? You know the molding that says "chevrolet" or "GMC"! Curious if you could still get it through you guys if ya got time. Thanks! __________________ R.I.P. Killer 71 10/26/07

05-29-2007, 02:37 PM	#13
Sadsack Registered User Join Date: May 2007 Location: East TN Posts: 171	Re: Anyone need any GM part #'s checked? HELP ME HELP ME!

05-29-2007, 07:12 AM	#14
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Anyone need any GM part #'s checked? Man...I think you opened a big can of worms. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-29-2007, 09:45 AM	#15
BACKYARD88 On the fast track to nowhere.. Join Date: May 2006 Location: Splendora, Texas Posts: 5,316	Re: Anyone need any GM part #'s checked? __________________ -Mike Owen- Support the board here! 71 Chevy short fleet build thread Double D Norwood, Houston, Cecilia, Jackson, Monroe and counting

05-29-2007, 10:14 AM	#16
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: Anyone need any GM part #'s checked? Yes Sir he did! He's a young man he can handle it! lol. __________________ R.I.P. Killer 71 10/26/07

05-29-2007, 03:21 PM	#17
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: Anyone need any GM part #'s checked? thanks for your time! __________________ R.I.P. Killer 71 10/26/07

05-29-2007, 05:31 PM	#18
johnyreb Registered User Join Date: Apr 2007 Location: Springdale, Arkansas Posts: 12	Re: Anyone need any GM part #'s checked? Probably no luck on the 1967 305 E V6 GMC fuel pump either huh? Not many people could imagine the headache trying to find correct fuel pump for this truck !!!!! Thanks John __________________ 1967 GMC Longbed 305E V6 3 on the tree

05-29-2007, 05:43 PM	#19
creeldaddy Registered User Join Date: Aug 2006 Location: columbia, tn Posts: 48	Re: Anyone need any GM part #'s checked? how much would this cost



Register or Log In To remove these advertisements.

05-31-2007, 11:14 AM	#21
JHART 1972 Shorty Owner Join Date: Feb 2007 Location: Stationed in Cali , born and raised in PHX Arizona. Posts: 796	Re: Anyone need any GM part #'s checked? I was given a transmission from a buddy of mine and i wanted to have the numbers crossed to be sure its the right one. The numbers off the case are 8685060. I just want to be sure its the right tranny. Any help would be awesome! -Hart __________________ 1972 Chevy Shorty C-10- Project In Work http://67-72chevytrucks.com/gallery/...ATT1721941.jpg- New Project

05-31-2007, 12:59 PM	#22
BLACK AND BLUE 67-72 Firefighter Join Date: Feb 2001 Location: Yellville, Ar, USA Posts: 1,943	Re: Anyone need any GM part #'s checked? On the 305v6 there are 3 different pumps, the part #'s for them are M348, M3955, and M3987 they are Carter #'s __________________ '72 Chevy SWB 350 Auto '67 GMC LWB 350 4 speed '70 Chevy 4x4 Stepside 350 Auto Yellville, Ar. USA

05-31-2007, 04:33 PM	#24
Southedisto River life...... Join Date: Oct 2005 Location: Soldotna AK Posts: 1,078	Re: Anyone need any GM part #'s checked? How about inner axle shafts (35 spline, Dana 60 srw axle) for an 86 K30, also ujoints for the same axle (should be 1480). Thanks __________________ I like wheelin in Dixie!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.