water outlet - The 1947 - Present Chevrolet & GMC Truck Message Board Network

setandreel · 07-04-2007, 09:50 AM

Happy 4th all
I have a 65 230 six, need a little help. I was putting a new temp gage on and the housing broke where the thermostat bolts to but problem is its the piece between the thermostat housing and the block. Any ideals where to find one? chevy duty or lmc doesn't have them is the junk yard my only option?
Thanks Mike

SkylineNXS · 07-04-2007, 02:47 PM

I asked about this piece for a 250 before, actaully recently, and a few members said i should be able to find one at a local parts store, like napa or autozone or anywhere else. I havent checked yet, but i would try there...

Brad

ClassicAutoResto · 07-04-2007, 09:48 PM

I manage a parts store by day (Classic Auto Restoration by Night, I'll sleep when I'm DEAD). I'll check tomorrow and see if Murray offers that spacer.

Jerry

ClassicAutoResto · 07-05-2007, 05:31 PM

Murray did not list the spacer. Looks like a boneyard item. Jerry

setandreel · 07-05-2007, 05:57 PM

Thanks Jerry
It's definitely a Saturday at the junk yard item and to find one in fair shape being cast aluminum the years do take their toll
Thanks Mike

ClassicAutoResto · 07-05-2007, 07:37 PM

JB Weld will work as a temporary fix until you find one. As long as you clean and prep REAL good, it will hold. Jerry

07-04-2007, 09:50 AM	#1
setandreel Registered User Join Date: May 2004 Location: Concord N.C. Posts: 115	water outlet Happy 4th all I have a 65 230 six, need a little help. I was putting a new temp gage on and the housing broke where the thermostat bolts to but problem is its the piece between the thermostat housing and the block. Any ideals where to find one? chevy duty or lmc doesn't have them is the junk yard my only option? Thanks Mike

07-04-2007, 02:47 PM	#2
SkylineNXS Registered User Join Date: Oct 2006 Location: Elgin, IL Posts: 658	Re: water outlet I asked about this piece for a 250 before, actaully recently, and a few members said i should be able to find one at a local parts store, like napa or autozone or anywhere else. I havent checked yet, but i would try there... Brad __________________ 2000 GMC Sierra EXT Cab Short 4x4, finally mine... 1966 C10 SWB Fleet, 250 I6, three on the tree.... Previously Owned.... 1987 Chevy R10 "Silverado" (at least the badges were) Short Step 350 700r4.... 1972 Chevy LWB Fleet 350/350 EXTENDED CAB ALL THE WAY! .._..~...-...._...____ .._..-...______\|_\|__\____ ..-..~.\|_(O)__\|_\|__\|_(O)]

07-04-2007, 09:48 PM	#3
ClassicAutoResto Rust Buster Join Date: Apr 2007 Location: Lebanon, Ky Posts: 558	Re: water outlet I manage a parts store by day (Classic Auto Restoration by Night, I'll sleep when I'm DEAD). I'll check tomorrow and see if Murray offers that spacer. Jerry

07-05-2007, 05:31 PM	#4
ClassicAutoResto Rust Buster Join Date: Apr 2007 Location: Lebanon, Ky Posts: 558	Re: water outlet Murray did not list the spacer. Looks like a boneyard item. Jerry

07-05-2007, 05:57 PM	#5
setandreel Registered User Join Date: May 2004 Location: Concord N.C. Posts: 115	Re: water outlet Thanks Jerry It's definitely a Saturday at the junk yard item and to find one in fair shape being cast aluminum the years do take their toll Thanks Mike

07-05-2007, 07:37 PM	#6
ClassicAutoResto Rust Buster Join Date: Apr 2007 Location: Lebanon, Ky Posts: 558	Re: water outlet JB Weld will work as a temporary fix until you find one. As long as you clean and prep REAL good, it will hold. Jerry

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.