|
07-04-2007, 12:50 PM | #1 |
Registered User
Join Date: Jan 2007
Location: brooklyn,ny
Posts: 77
|
tail light
I have a problem, I have a chev C10 which my break lights, I check the turn signals and everythin i check the fuse and all the fuse are good but when i turn on the right turn signal the reverse light on the left side start to blink while the right side turn signal is on I have park lights but i dont have no brake light when could be the problem with the wiring is it the wiring in the back or is it the front where it can be the problem
|
07-04-2007, 11:44 PM | #2 |
Registered User
Join Date: Feb 2007
Location: In the shop with the other tools
Posts: 62
|
Re: tail light
I can not tell you enough, check every ground wire you have. Start at the back of the truck and look for every one. I had very dim brake lights. Turn the headlights on and it killed everything in the back. Use either turn signal and both lights flashed as if the flasher was being used. I found one bad ground and that fixed the whole thing.
Josh |
07-05-2007, 02:22 AM | #3 |
Designated A-hole!
Join Date: Mar 2003
Location: South Mississippi
Posts: 36,448
|
Re: tail light
Check grounds are good, and take an old battery post cleaning brush and clean all your bulb sockets.
__________________
"If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck" |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|