Emergency Brake cable hooks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70LongbedC20 · 08-02-2007, 04:50 PM

Hello,

I was hoping that someone could give me a hand a post a picture of their E-brake cable routing. I was missing the E-brake cable hooks which mount someplace after the tensioner. One on either side of the frame. Well, I bought these from LMC ,but they are a lot smaller than I thought they would be, (especially for the price!

)and I have no idea how these are supposed to mount to the frame. I have my E-brake cable adjusted to the maximum just to get a little bit of a working brake. I was hoping these would take the extra slack out so that the system would work correctly. First picture is of the two little cute things in front of my keyboard, the second is the page out of the LMC catalog. They are item number 6 in the top illustration.

Thank you in advance,

jhow66 · 08-02-2007, 05:13 PM

The two little cute things hook into the frame. Adjust # 5 out so as to have slack in cable to hook the "cuties" into hole in frame and then adjust slack out of cable.

**70C10Toejam** · 08-02-2007, 05:38 PM

here's some pics of mine. took with cell phone.
they are about 12 inches in front of the rear cab mount.

1.-drivers side inside of frame (with me peaking through)
2.-drivers side outside of frame
3.-passengers side inside frame
4.-pass. side outside of frame

70LongbedC20 · 08-03-2007, 12:27 AM

Hey 70C10Toejam,

Thank you very much for providing the pictures. That gives me a much better idea. Now I'll be able to locate which frame hole to use.

Thanks,

kxnomore · 08-03-2007, 11:25 AM

Would anyone have any pictures or diagrams of the 4 X 4 setup? Specifically the front passenger side equalizer hook? I have been looking for these for over a year now.

Thanks!!

**70C10Toejam** · 08-03-2007, 05:43 PM

glad to help.

08-02-2007, 04:50 PM	#1
70LongbedC20 Registered User Join Date: Feb 2007 Location: France Posts: 53	Emergency Brake cable hooks Hello, I was hoping that someone could give me a hand a post a picture of their E-brake cable routing. I was missing the E-brake cable hooks which mount someplace after the tensioner. One on either side of the frame. Well, I bought these from LMC ,but they are a lot smaller than I thought they would be, (especially for the price! )and I have no idea how these are supposed to mount to the frame. I have my E-brake cable adjusted to the maximum just to get a little bit of a working brake. I was hoping these would take the extra slack out so that the system would work correctly. First picture is of the two little cute things in front of my keyboard, the second is the page out of the LMC catalog. They are item number 6 in the top illustration. Thank you in advance, Attached Images

08-02-2007, 05:13 PM	#2
jhow66 Registered User Join Date: Jun 2002 Location: Knoxville Tenn. Posts: 3,058	Re: Emergency Brake cable hooks The two little cute things hook into the frame. Adjust # 5 out so as to have slack in cable to hook the "cuties" into hole in frame and then adjust slack out of cable. __________________ 56 Chevy Bel-Air 2dr. HT (purchased new) 71 Chevy Cheyenne SWB PU (502HO) 65 GMC short bed step--work in progress and my gofer

08-02-2007, 05:38 PM	#3
70C10Toejam Hellasick Join Date: Jul 2006 Location: Death Moans, IA Posts: 876	Re: Emergency Brake cable hooks here's some pics of mine. took with cell phone. they are about 12 inches in front of the rear cab mount. 1.-drivers side inside of frame (with me peaking through) 2.-drivers side outside of frame 3.-passengers side inside frame 4.-pass. side outside of frame Attached Images __________________ I keep two MAGNUMS in my desk. One's a gun, and I keep it loaded. The other's a bottle and it keeps ME loaded. I'm Tracer Bullet. (Calvin and Hobbes) This life was a test. It was only a test. If this had been an actual life, you would have received instructions on where to go and what to do. RED meat is not bad for you...FUZZY BLUE/GREEN MEAT is bad for you!!!!!!!!!!!!! BUILT FORD TOUGH WITH CHEVY STUFF--sticker at Goodguys

08-03-2007, 12:27 AM	#4
70LongbedC20 Registered User Join Date: Feb 2007 Location: France Posts: 53	Re: Emergency Brake cable hooks Hey 70C10Toejam, Thank you very much for providing the pictures. That gives me a much better idea. Now I'll be able to locate which frame hole to use. Thanks,

08-03-2007, 11:25 AM	#5
kxnomore Registered User Join Date: Dec 2006 Location: CA Posts: 331	Re: Emergency Brake cable hooks Would anyone have any pictures or diagrams of the 4 X 4 setup? Specifically the front passenger side equalizer hook? I have been looking for these for over a year now. Thanks!!

08-03-2007, 05:43 PM	#6
70C10Toejam Hellasick Join Date: Jul 2006 Location: Death Moans, IA Posts: 876	Re: Emergency Brake cable hooks glad to help. __________________ I keep two MAGNUMS in my desk. One's a gun, and I keep it loaded. The other's a bottle and it keeps ME loaded. I'm Tracer Bullet. (Calvin and Hobbes) This life was a test. It was only a test. If this had been an actual life, you would have received instructions on where to go and what to do. RED meat is not bad for you...FUZZY BLUE/GREEN MEAT is bad for you!!!!!!!!!!!!! BUILT FORD TOUGH WITH CHEVY STUFF--sticker at Goodguys

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.