Info needed on body bushing kit

[Chevyman63]

Hi all, I have a body mount kit that came with my Blazer and after doing some research, I've found that it is a Prothane kit. It has nothing to tell me which bushing goes where, can anyone help? The kit number is a 7-105 and I have the numbers of all the individual pieces, but that's it.
Any help would be appreciated.
Thanks in advance.

[fun in dirt]

I just finished installing one on my Blazer today. It was an Energy Suspension kit #3-4110 but may be close to the same as yours.
From front to back there are 6 mount positions on each side (this includes the radiator ones). Positions 1-radiator uses the same bottom rubber as 3-6. Position 2 uses the thickest rubber between the frame & body. Positions 3 thru 6 all use the same rubbers...Now is all that clear as mud! This hard to explain without showing you a pic. I don't have a scanner here at home, but will scan the directions & info tomorrow morning at work & post here. It has all the sizes listed of each rubber, sleeve, & washer for each position.

[Chevyman63]

Originally Posted by fun in dirt

I just finished installing one on my Blazer today. It was an Energy Suspension kit #3-4110 but may be close to the same as yours.
From front to back there are 6 mount positions on each side (this includes the radiator ones). Positions 1-radiator uses the same bottom rubber as 3-6. Position 2 uses the thickest rubber between the frame & body. Positions 3 thru 6 all use the same rubbers...Now is all that clear as mud! This hard to explain without showing you a pic. I don't have a scanner here at home, but will scan the directions & info tomorrow morning at work & post here. It has all the sizes listed of each rubber, sleeve, & washer for each position.

Thanks a million!!! I really appreciate it!

[fun in dirt]

I hope this turns out big enough to read

[Chevyman63]

Thanks FID, that definitely helps.