anybody know about western chassis?

[dhughins]

http://sporttruckdirect.com/C10_kits.html

they have a drop kit for $209. is it any good? this is the cheapest i've seen.

i know you get what you pay for.

[Rc 415]

Western chassis is good stuff, Sport truck direct is questionable for some people...

[dhughins]

why questionable? what kinda problems?

[jermasaurus]

That seems like a decent price. I dont think it includes the notch pieces in the picture for that price. You shouldnt have to notch the frame though for a flip kit.

But I have no experience with this company. I went with DJM. I bought the 3" spindles and 5" flip. I costed me around 320 i think from stylin concepts a few years back.
The reason I paid more for the spindles is because it wont change the geometry of the suspension like a spring would. There are really no alignment issues to take care of after installing spindles. But I did have to adjust toe a little.
I found that a 3/5 drop will leave the front sitting a little high. I am going to replace all ball joints in the near future and want to trim a bit off my springs to make a 5/5 drop.

[bigblock73]

I would avoid Sport Truck Direct at all cost! I purchased my WC drop coils...and was told they were 1" drop coils for a small block truck, but 3" coils for a big block. There is no way a BB will drop a truck 2" compared to a SB. Needless to say, the coils they sent me did not drop my truck at all (I wanted 3" coils to replace my 1" coils)...and they would not refund my money.

I have a Western Chassis flip kit in my truck, and am very happy with it and the quality.

[gchemist]

I have WC spindal shackel/hanger combo on my truck. No problems here. I would paint all the parts before installing them. Use a high grade rust proof paint like POR-15 or Zero Rust. Look at the front suspension rebuild in my signature.

[bigblock73]

Originally Posted by gchemist

I have WC spindal shackel/hanger combo on my truck. No problems here. I would paint all the parts before installing them. Use a high grade rust proof paint like POR-15 or Zero Rust. Look at the front suspension rebuild in my signature.

There is no need to paint the WC flip kit components or coil springs, they come with a quality finish on them already. I do not know about their spindles or shackles/hangers though (I have Bell Tech)

[slugish]

Ihear a lot from you guys about western chassis, belltech, djm, etc but am I the only one here who has chassistech drop spindles from aim industries in OKLAHOMA i THINK . THEY WERE A LOT CHEAPER THAN BELLTECH , NO PROBLEMS AFTER 3- 4 YR,S. iM WORRIED SINCE NOONE ELSE HAS THEM ,THERE MAY BE A REASON WHY? ANYBODY. SAW THERE ADD IN TRUCKIN MAGAZINE

[jermasaurus]

Originally Posted by slugish

Ihear a lot from you guys about western chassis, belltech, djm, etc but am I the only one here who has chassistech drop spindles from aim industries in OKLAHOMA i THINK . THEY WERE A LOT CHEAPER THAN BELLTECH , NO PROBLEMS AFTER 3- 4 YR,S. iM WORRIED SINCE NOONE ELSE HAS THEM ,THERE MAY BE A REASON WHY? ANYBODY. SAW THERE ADD IN TRUCKIN MAGAZINE

I have actually never heard of them. One reason I went with DJM was because their spindles for the 1 1/4 "heavy duty" brakes were cheaper than the regular brakes. Some companies prices are opposite with the brake sizes.

[N2TRUX]

Originally Posted by slugish

.... am I the only one here who has chassistech drop spindles from aim industries .....

You are one of the fortunate few that bought from the @ssholes at AIM and didn't have a bad experience. Count your self blessed and move on. Do a search on the suspension forum here, or any other truck forum and you will find a LONG list of very dissatisfied customers. AIM/Chassis Tech are all the same thing and they totally SUCK.

[bagged74]

I have personally seen two sets of broken Chassis Tech spindles. the spindle shaft itself will actually just fall out.

[slugish]

Originally Posted by N2TRUX

You are one of the fortunate few that bought from the @ssholes at AIM and didn't have a bad experience. Count your self blessed and move on. Do a search on the suspension forum here, or any other truck forum and you will find a LONG list of very dissatisfied customers. AIM/Chassis Tech are all the same thing and they totally SUCK.

thank you for your response . this is the 1st time I have had any feedback on chassistech, but now Im worried. Ishould have done researh before I just ordered them . Cheaper is definitely not the best way .

[C&C Chevy]

The econo kit your looking at is the 3" drop springs in front and a 5" rear flip kit.

They have 2.5" drop spindles that alot of guys here have used, and I don't recall anyone having problems with them.

Western Chasis makes reliable stuff and I bought my spindles and drop leafs from them with no problems.

[Slonaker]

I have WC spindles and drop leaves. No problems with them after 2.5+ years.

I won't deal with STD. I emailed them 3 times about wanting to purchase my stuff from them, and never got a response. That's bad customer service, and Jeff's experience gauranteed I would never deal with them.

I bought my stuff from www.performancesuspension.com based on Swervin's recommendation. No problems, and they answered my questions by phone before I ordered.

Slonaker

[C&C Chevy]

btw, is AIM based in OKC? I thought they were a Cali outfit??

[killthewabbit]

They're in Mesa, AZ I think.

[xtreme80]

Originally Posted by killthewabbit

They're in Mesa, AZ I think.

You are correct. About 5 minutes from my place, and let me tell you, it is straight up SWEAT SHOP quality work in there. Their service and parts quality is horrible. They overwork many many illegal mexicans who don't know a bag from a ball joint, the quality of their work is shady at best, and I've never had a part from them work correctly the first time.

On my old Nissan Frontier, I bought a rollpan from them. We spent hours more on the body work to line that rollpan up than we should have.

Also got some drop spindles from them (didnt realize my distributor was carrying CT spindles)... the damn things didn't fit at all... you could tell they were made for that truck, but nothing cleared. A set of belltechs that I got a week later fit perfect.

Don't even get me started on their electronics... it's not a pretty story.

If you haven't broken your spindles yet, consider yourself lucky. I've witnessed first hand what kind of quality this company offers, and it's definately not good.