Front cab mount thickness/pics - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Detroit3100 · 09-27-2007, 03:11 PM

Hi I need the thickness of the front cab mounts, I am making spacers and looking to make some poly ones. If you have a pic to help me my floor board is pretty rusty so I might need your help in putting the mounting point back.
thanks

pgf545 · 09-27-2007, 09:57 PM

What year is your truck? I just redid the floor and firewall in the 52 I am working on and it was about .060 thou thick. I think that is 16ga. I have a few pictures under my build thread if they will help.

Bernie

1-ton of fun · 09-28-2007, 11:17 AM

i think he means the isolaters

Detroit3100 · 09-28-2007, 12:56 PM

sorry for not putting the year. 1950

and yes the rubber isolaters

pgf545 · 09-29-2007, 11:58 AM

I can't remember for sure...I was thinking it is 1/4. I am heading down to dad's tomorrow and if I remember I will measure it for you.

Bernie

pgf545 · 10-01-2007, 06:44 AM

I measured the new ones that we bought yesterday and it is .230. I don't think it will crush very much because it is pretty hard rubber. Anyway hope that helps.

Bernie

Detroit3100 · 10-05-2007, 10:01 AM

great, so about 1/4inch. wow I thought they were going to be thicker. I could probably cut a poly bushing in half for both. Are there washers top and bottom or any at all??

robin58 · 10-05-2007, 10:16 AM

This will give you an idea:

http://chevy.tocmp.com/1948_51truckshop/51ctsm0102.htm

09-27-2007, 03:11 PM	#1
Detroit3100 Registered User Join Date: May 2006 Location: Detroit Posts: 73	Front cab mount thickness/pics Hi I need the thickness of the front cab mounts, I am making spacers and looking to make some poly ones. If you have a pic to help me my floor board is pretty rusty so I might need your help in putting the mounting point back. thanks

09-27-2007, 09:57 PM	#2
pgf545 Registered User Join Date: May 2006 Location: Santa Fe,Texas Posts: 933	Re: Front cab mount thickness/pics What year is your truck? I just redid the floor and firewall in the 52 I am working on and it was about .060 thou thick. I think that is 16ga. I have a few pictures under my build thread if they will help. Bernie __________________ 52 Chevy Truck (Dad's) http://67-72chevytrucks.com/vboard/s...d.php?t=206021

09-28-2007, 11:17 AM	#3
1-ton of fun polishing a turd Join Date: Dec 2004 Location: houston, tx Posts: 687	Re: Front cab mount thickness/pics i think he means the isolaters __________________ 59 chevy apache 31 4x4 - my project: http://67-72chevytrucks.com/vboard/s....php?p=8668512 53 buick special - straight 8 sled - blow through turbo 47 gmc - flatbed hot rod build 99 ford econoline e350 - 4x4 converted family roadtrip/overlanding rig AKA 'Monstervan' AKA 'Daddy-Van'

09-28-2007, 12:56 PM	#4
Detroit3100 Registered User Join Date: May 2006 Location: Detroit Posts: 73	Re: Front cab mount thickness/pics sorry for not putting the year. 1950 and yes the rubber isolaters

09-29-2007, 11:58 AM	#5
pgf545 Registered User Join Date: May 2006 Location: Santa Fe,Texas Posts: 933	Re: Front cab mount thickness/pics I can't remember for sure...I was thinking it is 1/4. I am heading down to dad's tomorrow and if I remember I will measure it for you. Bernie __________________ 52 Chevy Truck (Dad's) http://67-72chevytrucks.com/vboard/s...d.php?t=206021

10-01-2007, 06:44 AM	#6
pgf545 Registered User Join Date: May 2006 Location: Santa Fe,Texas Posts: 933	Re: Front cab mount thickness/pics I measured the new ones that we bought yesterday and it is .230. I don't think it will crush very much because it is pretty hard rubber. Anyway hope that helps. Bernie __________________ 52 Chevy Truck (Dad's) http://67-72chevytrucks.com/vboard/s...d.php?t=206021

10-05-2007, 10:01 AM	#7
Detroit3100 Registered User Join Date: May 2006 Location: Detroit Posts: 73	Re: Front cab mount thickness/pics great, so about 1/4inch. wow I thought they were going to be thicker. I could probably cut a poly bushing in half for both. Are there washers top and bottom or any at all??

10-05-2007, 10:16 AM	#8
robin58 Registered User Join Date: May 2007 Location: Louisiana Posts: 763	Re: Front cab mount thickness/pics This will give you an idea: http://chevy.tocmp.com/1948_51truckshop/51ctsm0102.htm

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.