4 Link - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Oldironracing · 10-13-2007, 08:06 AM

I have a 72 long bed. Looking to put 4 link and a ford 9 inch narrowed to fit wider tires under. Not going to cut the frame for the narrowed rear. Wont the truck to hook up under power lots of power. What is the best 4 link set up out there you guys have seen?

67Fleet · 10-13-2007, 08:28 AM

some type of parallel 4-link would be your best bet for racing. Just make sure it is adjustable for track conditions. And you'll need a panhard bar to keep the rear centered.

rotgg · 10-13-2007, 08:36 AM

u can find one here that will handle lots of power http://www.swracecars.com/

Oldironracing · 10-13-2007, 10:51 PM

I still wont the truck to be streetable.

collin86 · 10-15-2007, 11:41 PM

check out the competition engineering 4 link kit

Oldironracing · 10-16-2007, 08:05 AM

I own a fab. shop. Making the stuff is not a problem. Have a computer cnc plazma cutter to cut out all the brackets. Have set up several 4 links on race cars. Just not sure which way to on the street????? Here are a couple of the resent racer we have built.

Oldironracing · 10-16-2007, 08:24 AM

Here are some more pic.

collin86 · 10-16-2007, 09:35 PM

i would do it very similar. go with a completly level bottom bar and set the top right in the middle and adjust from there

10-13-2007, 08:06 AM	#1
Oldironracing Registered User Join Date: Oct 2007 Location: Austin Arkansas Posts: 252	4 Link I have a 72 long bed. Looking to put 4 link and a ford 9 inch narrowed to fit wider tires under. Not going to cut the frame for the narrowed rear. Wont the truck to hook up under power lots of power. What is the best 4 link set up out there you guys have seen? __________________ OLDIRONRACING

10-13-2007, 08:28 AM	#2
67Fleet Outlandish Trends - FL Join Date: Jul 2005 Location: Orlando Posts: 1,396	Re: 4 Link some type of parallel 4-link would be your best bet for racing. Just make sure it is adjustable for track conditions. And you'll need a panhard bar to keep the rear centered. __________________ -Bret 67 short-fleet sold!

10-13-2007, 08:36 AM	#3
rotgg Registered User Join Date: Jan 2006 Location: al Posts: 233	Re: 4 Link u can find one here that will handle lots of power http://www.swracecars.com/

10-13-2007, 10:51 PM	#4
Oldironracing Registered User Join Date: Oct 2007 Location: Austin Arkansas Posts: 252	Re: 4 Link I still wont the truck to be streetable. __________________ OLDIRONRACING

10-15-2007, 11:41 PM	#5
collin86 Registered User Join Date: Sep 2007 Location: spokane, WA Posts: 136	Re: 4 Link check out the competition engineering 4 link kit

10-16-2007, 08:05 AM	#6
Oldironracing Registered User Join Date: Oct 2007 Location: Austin Arkansas Posts: 252	Re: 4 Link I own a fab. shop. Making the stuff is not a problem. Have a computer cnc plazma cutter to cut out all the brackets. Have set up several 4 links on race cars. Just not sure which way to on the street????? Here are a couple of the resent racer we have built. Attached Images __________________ OLDIRONRACING

10-16-2007, 08:24 AM	#7
Oldironracing Registered User Join Date: Oct 2007 Location: Austin Arkansas Posts: 252	Re: 4 Link Here are some more pic. Attached Images __________________ OLDIRONRACING

10-16-2007, 09:35 PM	#8
collin86 Registered User Join Date: Sep 2007 Location: spokane, WA Posts: 136	Re: 4 Link i would do it very similar. go with a completly level bottom bar and set the top right in the middle and adjust from there

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.