|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
10-28-2007, 04:06 PM
|
#1 |
|
Registered User
Join Date: Aug 2007
Location: ozark, al
Posts: 583
|
Help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
i bought new calipers and put them on and the passenger brake line is not working. it was not leaking when i unhooked it so i got a new one. but i cant get the old one unhooked where it meets the frame. any ideas?
|
|
|
|
10-28-2007, 04:30 PM
|
#2 |
|
Senior Member
Join Date: Jul 2003
Location: Indianapolis, IN
Posts: 1,277
|
Re: Help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
What exactly is the problem. There is a hardline that attaches to the hose on the inside of the frame rail. Is the nut frozen into the end of the hose? Is the hose end frozen into the frame rail?
|
|
|
|
|
10-28-2007, 04:47 PM
|
#3 |
|
Registered User
Join Date: Oct 2007
Location: Elsanor, Alabama
Posts: 35
|
Re: Help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
You will probably end up needing a set of line wrenches. You can make your own if you have some extra box ends. You need to use good wrenches though. Cheap Chinese won't cut the mustard.
__________________
Lee |
|
|
|
|
10-28-2007, 04:55 PM
|
#4 |
|
Robert Olson Transport
 
Join Date: Oct 2002
Location: recent transplant to NC USA
Posts: 20,310
|
Re: Help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
theres a clip that holds it to the frame rail and a hard metal line that bolts into it. due to the position its a PITA without a lift to get to
__________________
Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!! |
|
|
|
|
10-28-2007, 04:56 PM
|
#5 |
|
Registered User
Join Date: Aug 2007
Location: ozark, al
Posts: 583
|
Re: Help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
i have a line wrench but cant get it on the insinde of the frame rail.
|
|
|
|
|
10-28-2007, 04:59 PM
|
#6 |
|
Registered User
Join Date: Aug 2007
Location: ozark, al
Posts: 583
|
Re: Help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
i have a 79 and i dont see the c clamp that the other threads were talking about. i cant get a wrench on the nut on the inside of the frame rail. i'm thinking about cutting the outside of the screw where it goes in the frame with a grinder. then maybe i can pull the rest through the frame. i'm worried i'll have to replace the hardline also. how much is a proportioning valve? what size nut is on the end of the hardline?
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
