washer nozzle location - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GMC 3 · 10-31-2007, 08:20 PM

I'm putting my cowl back on and i forget exactly where the stock washer nozzle locations were. (It's been off for a few years). If any body has a picture of a cowl that shows where they mount that'd be great. Thanks in advance

GMC 3 · 11-01-2007, 04:05 PM

or maybe just tell me where the mount? thanks I'm assuming they just screw down under the cowl and point towards the window but would just like to double check

68gmsee · 11-01-2007, 04:22 PM

bump

I don't have any pics for you handy. All of the pics I've seen have been with the cowl on already. If you have the nozzles and the cowl, look at the holes where the spray tip comes through and you should get an idea. You're on the right track...

Also, do a search on cowl and see if something pops out.

68gmsee · 11-01-2007, 04:40 PM

This is the only pic I have. You can make out the nozzle location under the leaf screen.

ChevLoRay · 11-01-2007, 09:02 PM

Uh-oh....shaving the cowl....gonna lose the holes for the washers. Looks like I won't be having anymore washers....oh, they didn't work anyway.

No washers equals weight savings.

10-31-2007, 08:20 PM	#1
GMC 3 Registered User Join Date: Dec 2001 Location: Philadelphia, pa. U.S.A. Posts: 87	washer nozzle location I'm putting my cowl back on and i forget exactly where the stock washer nozzle locations were. (It's been off for a few years). If any body has a picture of a cowl that shows where they mount that'd be great. Thanks in advance

11-01-2007, 04:05 PM	#2
GMC 3 Registered User Join Date: Dec 2001 Location: Philadelphia, pa. U.S.A. Posts: 87	Re: washer nozzle location or maybe just tell me where the mount? thanks I'm assuming they just screw down under the cowl and point towards the window but would just like to double check

11-01-2007, 04:22 PM	#3
68gmsee Active Member Join Date: Jul 2007 Location: Centrally located between Houston, Austin and Waco. BCS area. Posts: 7,947	Re: washer nozzle location bump I don't have any pics for you handy. All of the pics I've seen have been with the cowl on already. If you have the nozzles and the cowl, look at the holes where the spray tip comes through and you should get an idea. You're on the right track... Also, do a search on cowl and see if something pops out.

11-01-2007, 04:40 PM	#4
68gmsee Active Member Join Date: Jul 2007 Location: Centrally located between Houston, Austin and Waco. BCS area. Posts: 7,947	Re: washer nozzle location This is the only pic I have. You can make out the nozzle location under the leaf screen. Attached Images

11-01-2007, 09:02 PM	#5
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Re: washer nozzle location Uh-oh....shaving the cowl....gonna lose the holes for the washers. Looks like I won't be having anymore washers....oh, they didn't work anyway. No washers equals weight savings. __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.