Front and Rear Disc Brakes - The 1947 - Present Chevrolet & GMC Truck Message Board Network

WyoCustomC10 · 11-30-2007, 10:46 AM

I'm looking for a brake upgrade for my '70 Chevy. It currently has stock, non adjusting drums front and rear. Are disk brakes on the rear necessary? I don't want to change the ride height with drop spindles, so what companies would you suggest getting the kit from? I have been looking at SSBC because of the completeness of their kit (including master cylinder and booster). I think LMC also sells a kit. Any help and suggestions would be much appreciated.

**raggedjim** · 11-30-2007, 01:27 PM

Rear disc aren't NECESSARY... or I'd have been in a ditch a long time ago!

If you are keeping the stock height and are wanting 5 lug wheels I would find the setup from a 71-72 truck (or 73-84) and swap it out. It has been done a ton of times. If you want to stay 6 lug you'll have to go aftermarket.

Good luck, Rg

WyoCustomC10 · 11-30-2007, 02:11 PM

Quote:

Originally Posted by raggedjim

Rear disc aren't NECESSARY... or I'd have been in a ditch a long time ago!

If you are keeping the stock height and are wanting 5 lug wheels I would find the setup from a 71-72 truck (or 73-84) and swap it out. It has been done a ton of times. If you want to stay 6 lug you'll have to go aftermarket.

Good luck, Rg

I want to keep the 6 lug wheels I currently have on the truck, so aftermarket it is.

fastom · 11-30-2007, 06:24 PM

Try www.earlyclassic.com. Great people and they sell everything you need for the brakes.

11-30-2007, 10:46 AM	#1
WyoCustomC10 Registered User Join Date: Jul 2007 Location: Kansas City, KS Posts: 46	Front and Rear Disc Brakes I'm looking for a brake upgrade for my '70 Chevy. It currently has stock, non adjusting drums front and rear. Are disk brakes on the rear necessary? I don't want to change the ride height with drop spindles, so what companies would you suggest getting the kit from? I have been looking at SSBC because of the completeness of their kit (including master cylinder and booster). I think LMC also sells a kit. Any help and suggestions would be much appreciated. __________________ 1970 Chevy Custom C/10 Dark Bronze & White, 406 C.I. SBC, Edlebrock Cam, Intake, TH350 Trans with cooler, Headman Headers, 2.5" dual exaust with 28" glass packs, 3:73 gears, Original Oak bed, Pace Edwards Roll Top Toneau Cover, Resounds Bluetooth Radio, Chevy rally wheels, 265/75R15 General AT2's

11-30-2007, 01:27 PM	#2
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,566	Re: Front and Rear Disc Brakes Rear disc aren't NECESSARY... or I'd have been in a ditch a long time ago! If you are keeping the stock height and are wanting 5 lug wheels I would find the setup from a 71-72 truck (or 73-84) and swap it out. It has been done a ton of times. If you want to stay 6 lug you'll have to go aftermarket. Good luck, Rg __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer - https://67-72chevytrucks.com/vboard/...d.php?t=856475 '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203 Ideas - https://67-72chevytrucks.com/vboard/...d.php?t=851743

11-30-2007, 06:24 PM	#4
fastom That's right, it's Copper!! Join Date: May 2007 Location: Bakersfield, Central California Posts: 558	Re: Front and Rear Disc Brakes Try www.earlyclassic.com. Great people and they sell everything you need for the brakes.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.