|
|
|
12-04-2007, 07:43 PM
|
#1 |
|
67 Chevy Stepside
Join Date: Mar 2007
Location: Jonesville NC
Posts: 836
|
454 for sale or trade
ok i finlley went and got it. i went and pick it up sat. and found out the whole story about it. it is a 454 that was a advance auto store. replacement engine. the po went to advance and bought it and took it to a machine shop and had the studs put in it to hold the heads on and bore it 60 over bought a big cam kit that came with springs and timeing set and had it put in it. and he broke it in the wrong way. drove it on the trailer and off the trailer and it was setting ther idleing and it chew up a couple of cam lobes and the shaveing went to the crank. and scared it a little . he pulled the crank back out and the cam and started to fix when i bought it so it needs a crank kit and a cam and lifters and a homic. blancer. i will trade it for a small block that is bulit or sell it for 1200.00
__________________
1967 Chevy stepside 1976 BIG DOOLEY 454 turbo 400 4:11 |
|
|
|
12-04-2007, 07:49 PM
|
#2 |
|
67 Chevy Stepside
Join Date: Mar 2007
Location: Jonesville NC
Posts: 836
|
Re: 454 for sale or trade
more pic
__________________
1967 Chevy stepside 1976 BIG DOOLEY 454 turbo 400 4:11 |
|
|
|
|
12-08-2007, 11:54 AM
|
#3 |
|
Registered User
Join Date: Sep 2005
Location: Smith Mountain Lake Virginia
Posts: 1,537
|
Re: 454 for sale or trade
Any chance you got any/all the brackets and pulleys for it? If you do and aren't going to be using them, let me know. Where abouts in NC are you located?
__________________
"A cat will almost always blink when hit between the eyes with a ball peen hammer" (you don't always have to state the obvious) Wear your PPE! You can eat with false teeth but you can't see with a false eye. 1959 Studebaker Silverhawk 350/400 1972 C10 L6 3OTT 2005 F350 - Built - whew! |
|
|
|
|
12-10-2007, 12:44 AM
|
#4 |
|
67 Chevy Stepside
Join Date: Mar 2007
Location: Jonesville NC
Posts: 836
|
Re: 454 for sale or trade
no brackets . jonesville
__________________
1967 Chevy stepside 1976 BIG DOOLEY 454 turbo 400 4:11 |
|
|
|
|
12-10-2007, 11:40 PM
|
#5 |
|
Registered User
Join Date: Apr 2004
Location: N.E. MO
Posts: 1,749
|
Re: 454 for sale or trade
Does the crank, cam, and main bearing caps go with it? What sort of built small block ya lookin for?
__________________
72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey |
|
|
|
|
12-11-2007, 11:07 PM
|
#6 |
|
67 Chevy Stepside
Join Date: Mar 2007
Location: Jonesville NC
Posts: 836
|
Re: 454 for sale or trade
the crank goes but is only good for a core. it mightcould turn down. the cam was bad and it got trash. the main caps are there and the rod caps i got. no haomic. blancer. it is all new motor. i got a orig intake, oil pan, valve covers, and all the push rods. i would like a good bulit 350,400 sb. it can be a few years old i don't want a wore out one and not a new one. just a good bulit sb from mild to wild more wilder the better
__________________
1967 Chevy stepside 1976 BIG DOOLEY 454 turbo 400 4:11 |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
