Your Steering Set-ups with a Z - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Slmd92DIME · 12-31-2007, 07:16 PM

I am starting steerin this week.. I was wonderin if some of you could post up your steering setups coming from the column to the steering box.... I have searched but not really found too much.. I have a 4 inch Z.. Can I get away with just using 2 U joints? Please post your pictures I really appreciate it

L0WRIDE · 12-31-2007, 11:52 PM

I'm running 3 u joints with 21/2'' z i haven't got any pics and i can't take any cause my front ends in bits at the moment

Mkcustums · 01-04-2008, 09:23 PM

Not mine, but a picture I have of someones set-up from this site. I have more but I need to resize them later.

Mkcustums · 01-04-2008, 09:35 PM

Here is another I just found... (on here) Hope they give you an idea of how it works. I'll try to get the others up for you as well.
.
.
.
.

Slmd92DIME · 01-04-2008, 09:59 PM

Mine was just barely rubbin the upper arm... I cut the arm then put a half of a piece of round tubin in it and welded it all back to... I hope it is still strong enough.... I think it will be alright though.. Thanks for the help guys

smashingchuck · 02-01-2008, 03:11 AM

not a very good picture, but here is one I took of mine a few years ago. Ment to post this a while ago but I just found the picture.

12-31-2007, 07:16 PM	#1
Slmd92DIME Registered User Join Date: Mar 2007 Location: West Virginia Posts: 481	Your Steering Set-ups with a Z I am starting steerin this week.. I was wonderin if some of you could post up your steering setups coming from the column to the steering box.... I have searched but not really found too much.. I have a 4 inch Z.. Can I get away with just using 2 U joints? Please post your pictures I really appreciate it

12-31-2007, 11:52 PM	#2
L0WRIDE Registered User Join Date: Jan 2005 Location: AUCKLAND, NEW ZEALAND Posts: 2,166	Re: Your Steering Set-ups with a Z I'm running 3 u joints with 21/2'' z i haven't got any pics and i can't take any cause my front ends in bits at the moment __________________ 49 CHEVROLET 1/2 TON, 52 CHEVROLET SEDAN 62 HARDTOP NOVA 65 CHEVROLET BB LWB FLEETSIDE 90 CHEVROLET EXTRA CAB CHEVY ONLY - NZ Chapter http://67-72chevytrucks.com/vboard/s...d.php?t=137984

01-04-2008, 09:23 PM	#3
Mkcustums Registered User Join Date: Oct 2007 Location: Wilsonville Or Posts: 705	Re: Your Steering Set-ups with a Z Not mine, but a picture I have of someones set-up from this site. I have more but I need to resize them later. Attached Images

01-04-2008, 09:35 PM	#4
Mkcustums Registered User Join Date: Oct 2007 Location: Wilsonville Or Posts: 705	Re: Your Steering Set-ups with a Z Here is another I just found... (on here) Hope they give you an idea of how it works. I'll try to get the others up for you as well. . . . . Attached Images

01-04-2008, 09:59 PM	#5
Slmd92DIME Registered User Join Date: Mar 2007 Location: West Virginia Posts: 481	Re: Your Steering Set-ups with a Z Mine was just barely rubbin the upper arm... I cut the arm then put a half of a piece of round tubin in it and welded it all back to... I hope it is still strong enough.... I think it will be alright though.. Thanks for the help guys

02-01-2008, 03:11 AM	#6
smashingchuck It'd be alot cooler if you did Join Date: May 2003 Location: Three Rivers, MI Posts: 2,345	Re: Your Steering Set-ups with a Z not a very good picture, but here is one I took of mine a few years ago. Ment to post this a while ago but I just found the picture. Attached Images __________________ 78 Build Thread 4Runner Build

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.