Project little daisy question.. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FRENCHBLUE72 · 03-02-2008, 02:20 AM

Truck has been clipped with a nova clip with disk brakes and a nova rear end with drum brakes, my question is should I change out the master cylinder and upgrade to a booster type of set-up or will it work just fine the way it is.....

entourageguy · 03-02-2008, 05:35 AM

If your talking about using the original master I'd be updating to the dual with a booster and even a proportioning valve. Since your running discs up front you're going to need more pressure for the front disc. you will appreciate the extra whoa power....

55dude · 03-02-2008, 06:49 AM

show us your ride dude! sounds cool. what year nove clip and rearend?

entourageguy · 03-02-2008, 05:21 PM

Here's a link to a good article on the brake question from stovebolt forum.

http://www.stovebolt.com/techtips/ma...der/index.html

FRENCHBLUE72 · 03-02-2008, 06:36 PM

http://67-72chevytrucks.com/vboard/s...d.php?t=255559

FRENCHBLUE72 · 03-02-2008, 06:37 PM

Hey brian it says page cannot be displayed.

poncho_villa · 03-02-2008, 09:22 PM

Try this. If it still fails, go to the stovebolt site and navigate from there. It's a good article.

http://www.stovebolt.com/techtips/ma...der/index.html

entourageguy · 03-02-2008, 09:40 PM

Yea it is a pretty good one. Mine has been fixed.

1-ton of fun · 03-03-2008, 01:18 PM

yes, get a booster and dual m/c to go with it.

FRENCHBLUE72 · 03-04-2008, 02:28 AM

Thanks guys.... Looks like I ll have to upgrade just as soon as I get a new passengerside caliper darn thing is stickin..

FRENCHBLUE72 · 06-29-2008, 08:16 AM

Just bought these and a painless harness for the truck .. I should be back on it pretty soon.....
http://cgi.ebay.com/ebaymotors/ws/eB...263671184&rd=1

http://cgi.ebay.com/ebaymotors/ws/eB...MEWN:IT&ih=017

http://cgi.ebay.com/ebaymotors/ws/eB...MEWN:IT&ih=020

http://cgi.ebay.com/ebaymotors/ws/eB...MEWN:IT&ih=020

solidaxel · 06-29-2008, 11:20 AM

[QUOTE=FRENCHBLUE72;2785487]Just bought these and a painless harness for the truck .. I should be back on it pretty soon.....

http://cgi.ebay.com/ebaymotors/ws/eB...MEWN:IT&ih=017

Did you purchasas one of those 50.00 distributors?
I keep wondering what the are actually like in real life, DO THEY WORK?
Do they have the right advance curve is it tunable?
I guessd they can reverse engineer anything with a model, clever people!!

03-02-2008, 02:20 AM	#1
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Project little daisy question.. Truck has been clipped with a nova clip with disk brakes and a nova rear end with drum brakes, my question is should I change out the master cylinder and upgrade to a booster type of set-up or will it work just fine the way it is..... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

03-02-2008, 05:35 AM	#2
entourageguy Yellow truck club Join Date: Apr 2006 Location: Barrie Ontario Posts: 2,080	Re: Project little daisy question.. If your talking about using the original master I'd be updating to the dual with a booster and even a proportioning valve. Since your running discs up front you're going to need more pressure for the front disc. you will appreciate the extra whoa power.... __________________ ................................................................ Brian ...... My hub garage address http://www.hubgarage.com/mygarage/59apache I gue$$ everything has it'$ price ALL GONE NOW *59 Chev Apache* *PRAISE THE LOWERED* 350 700r lokar shifter power MII front end, shockwaves tilt, 4 wheel discs 4-link and bags 10 bolt limited

03-02-2008, 06:49 AM	#3
55dude Registered User Join Date: Jan 2007 Location: tacoma wa. Posts: 1,037	Re: Project little daisy question.. show us your ride dude! sounds cool. what year nove clip and rearend?

03-02-2008, 05:21 PM	#4
entourageguy Yellow truck club Join Date: Apr 2006 Location: Barrie Ontario Posts: 2,080	Re: Project little daisy question.. Here's a link to a good article on the brake question from stovebolt forum. http://www.stovebolt.com/techtips/ma...der/index.html __________________ ................................................................ Brian ...... My hub garage address http://www.hubgarage.com/mygarage/59apache I gue$$ everything has it'$ price ALL GONE NOW *59 Chev Apache* *PRAISE THE LOWERED* 350 700r lokar shifter power MII front end, shockwaves tilt, 4 wheel discs 4-link and bags 10 bolt limited Last edited by entourageguy; 03-02-2008 at 09:39 PM.

03-02-2008, 06:36 PM	#5
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Project little daisy question.. http://67-72chevytrucks.com/vboard/s...d.php?t=255559 __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

03-02-2008, 06:37 PM	#6
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Project little daisy question.. Hey brian it says page cannot be displayed. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

03-02-2008, 09:22 PM	#7
poncho_villa Registered User Join Date: Feb 2005 Location: B.C. Posts: 457	Re: Project little daisy question.. Try this. If it still fails, go to the stovebolt site and navigate from there. It's a good article. http://www.stovebolt.com/techtips/ma...der/index.html

03-02-2008, 09:40 PM	#8
entourageguy Yellow truck club Join Date: Apr 2006 Location: Barrie Ontario Posts: 2,080	Re: Project little daisy question.. Yea it is a pretty good one. Mine has been fixed. __________________ ................................................................ Brian ...... My hub garage address http://www.hubgarage.com/mygarage/59apache I gue$$ everything has it'$ price ALL GONE NOW *59 Chev Apache* *PRAISE THE LOWERED* 350 700r lokar shifter power MII front end, shockwaves tilt, 4 wheel discs 4-link and bags 10 bolt limited

03-03-2008, 01:18 PM	#9
1-ton of fun polishing a turd Join Date: Dec 2004 Location: houston, tx Posts: 674	Re: Project little daisy question.. yes, get a booster and dual m/c to go with it. __________________ 59 chevy apache 31 4x4 - my project: http://67-72chevytrucks.com/vboard/s....php?p=8668512 53 buick special - straight 8 sled - blow through turbo 47 gmc - flatbed hot rod build 99 ford econoline e350 - 4x4 converted family roadtrip/overlanding rig AKA 'Monstervan' AKA 'Daddy-Van'

03-04-2008, 02:28 AM	#10
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Project little daisy question.. Thanks guys.... Looks like I ll have to upgrade just as soon as I get a new passengerside caliper darn thing is stickin.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

06-29-2008, 08:16 AM	#11
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Project little daisy question.. Just bought these and a painless harness for the truck .. I should be back on it pretty soon..... http://cgi.ebay.com/ebaymotors/ws/eB...263671184&rd=1 http://cgi.ebay.com/ebaymotors/ws/eB...MEWN:IT&ih=017 http://cgi.ebay.com/ebaymotors/ws/eB...MEWN:IT&ih=020 http://cgi.ebay.com/ebaymotors/ws/eB...MEWN:IT&ih=020 __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

06-29-2008, 11:20 AM	#12
solidaxel Registered User Join Date: Dec 2002 Location: Cactus Patch So. Az Posts: 4,749	Re: Project little daisy question.. [QUOTE=FRENCHBLUE72;2785487]Just bought these and a painless harness for the truck .. I should be back on it pretty soon..... http://cgi.ebay.com/ebaymotors/ws/eB...MEWN:IT&ih=017 Did you purchasas one of those 50.00 distributors? I keep wondering what the are actually like in real life, DO THEY WORK? Do they have the right advance curve is it tunable? I guessd they can reverse engineer anything with a model, clever people!! __________________ 53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD) 53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25 55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73 62 Solidaxle Corvette Roman Red (327 340hp 4spd 3:36) C4 & C5 suspension tube chassis LS 3 4L70E 65 Corvette Coupe 327 350hp 4spd 4:11 78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42 2000 S-Type 3.0 (wife cruiser) 2003 GMC SCSB 5.3 4L60E 3:42

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.