Hey airbag guys... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BB6T7 · 03-02-2008, 12:32 PM

A R T told me that their bags for the front of my 67, at ride height was the same as a 2 in drop spring. what I need is a bag that is the same as 2.5 in drop spring , so combined with my 2.5 drop spindle will give me 5 in drop up front. In back I got 6 in coils no c-notch. is there a bag for the back that will give a 7 in drop at ride height ? I dont want to use blocks cause of pinion angle issues. I know i will have to c-notch in back. Right now I would like to set and go, no compressor or tanks. does this sound do-able or not

smashingchuck · 03-02-2008, 08:19 PM

uh.... let some air out of the bag?!?

BB6T7 · 03-03-2008, 01:00 AM

Yea i thought of this too but will it effect ride quality at a lower psi ?How much psi to raise or lower .5 inch? I am knew to this so thanks for your patients

C10-Driver · 03-03-2008, 03:53 AM

Probably only a few pounds to lower it an extra 1/2" but I would suggest cutting the lower bag cups down to get the 1/2" you want... I cut mine down a little over an inch to get the front end lower.

BB6T7 · 03-03-2008, 06:51 AM

That sounds like a great way to fine tune my stance up front-thanks . How about in back where I need a 7 in drop? can I do that with bags only or do I need blocks too? Any suggestions for bags? RE7?, ART? Firestone?

SCOTI · 03-03-2008, 07:02 AM

Quote:

Originally Posted by BB6T7

That sounds like a great way to fine tune my stance up front-thanks . How about in back where I need a 7 in drop? can I do that with bags only or do I need blocks too? Any suggestions for bags? RE7?, ART? Firestone?

7" drop w/bags only? Not that I've seen. Bolt the bags directly in place of coils & use lowering blocks & your there.

BB6T7 · 03-03-2008, 07:55 AM

will I run into pinion angle problems with blocks? what about air bag suggestions? type/brand?

SCOTI · 03-04-2008, 03:14 AM

Quote:

Originally Posted by BB6T7

will I run into pinion angle problems with blocks? what about air bag suggestions? type/brand?

http://67-72chevytrucks.com/vboard/s...2&postcount=12

**Hart_Rod** · 03-05-2008, 11:26 PM

Quote:

Originally Posted by BB6T7

will I run into pinion angle problems with blocks? what about air bag suggestions? type/brand?

You can also flip the trailing arm mounting brackets over. This will help with the pinion angle also.

Frizzle Fry · 03-04-2008, 06:43 AM

7" out back with no notch? Hold on to your teeth!

I have Slams RE7's in place of the rear springs and 3" blocks (only advisable with big rollers), and no pinion angle issues yet. I'm sure it's not optimum but there are wedges available to correct it if needed. With 1" blocks I wouldn't be worried.

BB6T7 · 03-04-2008, 12:49 PM

WOW, you guys are a great help thanks much. Now I just have to make time to work on it! Yes frizzle, its gonna get c-notched

gringoloco · 03-05-2008, 04:00 AM

Here's a pic of my truck at ride height with the bags at the 6" recommended installed height with 1.5" blocks. I'd guess it's around a 7-or-8" drop. The notches are mandatory at this amount of drop...

SCOTI · 03-05-2008, 04:06 AM

Quote:

Originally Posted by gringoloco

Here's a pic of my truck at ride height with the bags at the 6" recommended installed height with 1.5" blocks. I'd guess it's around a 7-or-8" drop. The notches are mandatory at this amount of drop...

Truck?? You have air on it too??????

gringoloco · 03-05-2008, 04:56 AM

Quote:

Originally Posted by SCOTI

Truck?? You have air on it too??????

As of this past weekend... Click me. And yes, I do have a sickness...

gringoloco · 03-05-2008, 05:30 AM

Fixed.

03-02-2008, 12:32 PM	#1
BB6T7 Registered User Join Date: Oct 2007 Location: springfield,oregon Posts: 17	Hey airbag guys... A R T told me that their bags for the front of my 67, at ride height was the same as a 2 in drop spring. what I need is a bag that is the same as 2.5 in drop spring , so combined with my 2.5 drop spindle will give me 5 in drop up front. In back I got 6 in coils no c-notch. is there a bag for the back that will give a 7 in drop at ride height ? I dont want to use blocks cause of pinion angle issues. I know i will have to c-notch in back. Right now I would like to set and go, no compressor or tanks. does this sound do-able or not

03-02-2008, 08:19 PM	#2
smashingchuck It'd be alot cooler if you did Join Date: May 2003 Location: Three Rivers, MI Posts: 2,345	Re: Hey airbag guys... uh.... let some air out of the bag?!? __________________ 78 Build Thread 4Runner Build

03-03-2008, 01:00 AM	#3
BB6T7 Registered User Join Date: Oct 2007 Location: springfield,oregon Posts: 17	Re: Hey airbag guys... Yea i thought of this too but will it effect ride quality at a lower psi ?How much psi to raise or lower .5 inch? I am knew to this so thanks for your patients

03-03-2008, 03:53 AM	#4
C10-Driver Chevy Truck Addict Join Date: Aug 2006 Location: Kelowna, BC Posts: 1,176	Re: Hey airbag guys... Probably only a few pounds to lower it an extra 1/2" but I would suggest cutting the lower bag cups down to get the 1/2" you want... I cut mine down a little over an inch to get the front end lower. __________________ . 1970 Chev C/10 SWB, 355 SBC, 700R4, 3.73 Posi, Air Ride (Click to view Build Thread) (SOLD) 1978 Chevy C/10 SWB 1970 Pontiac Lemans .

03-03-2008, 06:51 AM	#5
BB6T7 Registered User Join Date: Oct 2007 Location: springfield,oregon Posts: 17	Re: Hey airbag guys... That sounds like a great way to fine tune my stance up front-thanks . How about in back where I need a 7 in drop? can I do that with bags only or do I need blocks too? Any suggestions for bags? RE7?, ART? Firestone?

03-03-2008, 07:55 AM	#7
BB6T7 Registered User Join Date: Oct 2007 Location: springfield,oregon Posts: 17	Re: Hey airbag guys... will I run into pinion angle problems with blocks? what about air bag suggestions? type/brand?

03-04-2008, 06:43 AM	#10
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: Hey airbag guys... 7" out back with no notch? Hold on to your teeth! I have Slams RE7's in place of the rear springs and 3" blocks (only advisable with big rollers), and no pinion angle issues yet. I'm sure it's not optimum but there are wedges available to correct it if needed. With 1" blocks I wouldn't be worried.

03-04-2008, 12:49 PM	#11
BB6T7 Registered User Join Date: Oct 2007 Location: springfield,oregon Posts: 17	Re: Hey airbag guys... WOW, you guys are a great help thanks much. Now I just have to make time to work on it! Yes frizzle, its gonna get c-notched Last edited by BB6T7; 03-04-2008 at 12:54 PM.

03-05-2008, 04:00 AM	#12
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Hey airbag guys... Here's a pic of my truck at ride height with the bags at the 6" recommended installed height with 1.5" blocks. I'd guess it's around a 7-or-8" drop. The notches are mandatory at this amount of drop... Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

03-05-2008, 05:30 AM	#15
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Hey airbag guys... Fixed. __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.