I want to see your rear-end - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kimag2 · 03-22-2008, 09:59 PM

trying to see where i can exit my tail pipes.
front of wheels?
rear of wheels?
dual on one side ?

straight back...

etc lets see some pics

thanks
kimag

benoit454 · 03-22-2008, 10:09 PM

Malo83 · 03-22-2008, 10:11 PM

Dumped in front of axle

69BBsuburban · 03-22-2008, 11:14 PM

Mine....slash cut tips...

Blackstone · 03-22-2008, 11:25 PM

For me, this decision hinges upon 2 factors

1) Who do I want to hear it?

2) Will it jive with the general theme of the vehicle?

If I want my truck to appear stock, for originality's sake I'd dump at the factory's intended location behind the rear tires where I would still hear a fair amount of rumble from the driver's seat.

If I'm going for a less-refined hotrod look and want to feel the thunder... yeah, let's dump it in front of the rear wheels and make some NOISE!

If you want the guy you just left behind at the light to feel the thunder, nothing compares to a rear-exit system.

I'm cool with any three of these options, but I would avoid a "before-the-wheel" exit on a daily driver if you want to hear the radio or hold a conversation with your passenger.

Piotrowski102 · 03-23-2008, 12:15 AM

I dont have any experiance with this but I hear that if you tow a lot of trailers its bad to run em strait out the back because the sound echos off the trailers and sounds like $H!7. Once again I might be wrong but it makes sence.

69BBsuburban · 03-23-2008, 12:20 AM

Quote:

Originally Posted by Piotrowski102

I dont have any experiance with this but I hear that if you tow a lot of trailers its bad to run em strait out the back because the sound echos off the trailers and sounds like !7. Once again I might be wrong but it makes sence.

Also not good straight back if you USE the truck alot, when loading and unloading with truck running.....unless ya like smelling like exhaust. haha

Grande Rojo · 03-23-2008, 12:17 AM

ainokea · 03-24-2008, 07:59 AM

Quote:

Originally Posted by Grande Rojo

what size wheel is that? and bs...

Grande Rojo · 03-24-2008, 07:10 PM

Quote:

Originally Posted by ainokea

what size wheel is that? and bs...

20x12 6"bs 315/35/20 tire

79GMC_OLDS · 03-25-2008, 05:57 AM

loud and proud

kimag2 · 03-24-2008, 01:41 AM

Thing i will do with my truck, it as a 3/5 drop, will be towing stock car , so i don't have much space to pass the tails.over the rear-end......

chemsearch · 03-24-2008, 02:08 AM

grande rojo, thats a real creative set up, looks like the license plate fits pretty perfectly on the tailgate

gchemist · 03-24-2008, 04:05 AM

ProStreet83C10 · 03-24-2008, 04:33 AM

tvblazer78 · 03-24-2008, 06:24 AM

This is the only good shot I had.. This is not the way I have it now, but I am going to do it this way later..

68Stepbed · 03-24-2008, 06:48 AM

Mine were slightly angled downward and tucked back in case I ever put a sport bumper on.

C10 the GEM · 03-26-2008, 05:02 AM

Quote:

Originally Posted by tvblazer78

This is the only good shot I had.. This is not the way I have it now, but I am going to do it this way later..

tvblazer what size exhaust is that?

tvblazer78 · 03-26-2008, 10:38 PM

Quote:

Originally Posted by C10 the GEM

tvblazer what size exhaust is that?

3" on both sides..

Thanks,

72BlckButy · 03-26-2008, 06:08 AM

Quote:

Originally Posted by tvblazer78

This is the only good shot I had.. This is not the way I have it now, but I am going to do it this way later..

Love that shot!

chromyelow1 · 03-24-2008, 08:00 AM

grande rojo, thats looks sweet! if i ever get mine redone thats excatly how to do it.

flamingbig10 · 03-24-2008, 09:01 AM

I run it dumped at the muffler now

kimag2 · 03-24-2008, 03:43 PM

tvblazer78: that would be a nice idea if the pipe would stick out from the 1/4 panel with a chrome basal ....

8T3GMC · 03-25-2008, 09:06 AM

87Lowrider · 03-26-2008, 06:36 AM

Sorry, I couldn't resist!

03-22-2008, 09:59 PM	#1
kimag2 Registered User Join Date: Feb 2008 Location: Dalhousie N.B. Canada Posts: 19	I want to see your rear-end trying to see where i can exit my tail pipes. front of wheels? rear of wheels? dual on one side ? straight back... etc lets see some pics thanks kimag

03-22-2008, 10:09 PM	#2
benoit454 Chris Join Date: Nov 2004 Location: Monaville, WV Posts: 3,737	Re: I want to see your rear-end __________________ Chris GIT R DONE!!!!!! Check out all our rides, http://www.cardomain.com/id/benwa454

03-22-2008, 10:11 PM	#3
Malo83 Cruzzzn' Vet Join Date: Jan 2005 Location: Porterville,Ca. Posts: 1,918	Re: I want to see your rear-end Dumped in front of axle

03-22-2008, 11:14 PM	#4
69BBsuburban Right in front of you. Join Date: Jan 2006 Location: Roy, Wa Posts: 584	Re: I want to see your rear-end Mine....slash cut tips... Attached Images __________________ Pinstriping by Josh '78 Chevy Silverado SWB (lowered, 454) '90 Chevy Sport Truck '68 Dodge Charger R/T 1930 Ford Model A

03-22-2008, 11:25 PM	#5
Blackstone Registered User Join Date: Dec 2006 Location: Central Maine Posts: 210	Re: I want to see your rear-end For me, this decision hinges upon 2 factors 1) Who do I want to hear it? 2) Will it jive with the general theme of the vehicle? If I want my truck to appear stock, for originality's sake I'd dump at the factory's intended location behind the rear tires where I would still hear a fair amount of rumble from the driver's seat. If I'm going for a less-refined hotrod look and want to feel the thunder... yeah, let's dump it in front of the rear wheels and make some NOISE! If you want the guy you just left behind at the light to feel the thunder, nothing compares to a rear-exit system. I'm cool with any three of these options, but I would avoid a "before-the-wheel" exit on a daily driver if you want to hear the radio or hold a conversation with your passenger.

03-23-2008, 12:15 AM	#6
Piotrowski102 Registered User Join Date: Mar 2008 Location: Smith-Ennismore-Lakefield, Ontario Posts: 57	Re: I want to see your rear-end I dont have any experiance with this but I hear that if you tow a lot of trailers its bad to run em strait out the back because the sound echos off the trailers and sounds like $H!7. Once again I might be wrong but it makes sence. Last edited by Piotrowski102; 03-23-2008 at 12:16 AM.

03-23-2008, 12:17 AM	#8
Grande Rojo paper or plastic? Join Date: Nov 2002 Location: SW Missouri Posts: 671	Re: I want to see your rear-end Attached Images __________________ 1967 Chevy SWB 250 http://67-72chevytrucks.com/vboard/s...d.php?t=442157 1977 Chevy SWB 454 No More 454 getting 5.3 http://67-72chevytrucks.com/vboard/s...d.php?t=310518 1977 Stepside Truck of the month winner http://67-72chevytrucks.com/vboard/s...d.php?t=135524 1965 Chevy C10 454 http://67-72chevytrucks.com/vboard/s...d.php?t=731372 1975 Dodge Power Wagon http://67-72chevytrucks.com/vboard/s...=1#post7871388

03-25-2008, 05:57 AM	#11
79GMC_OLDS Registered User Join Date: Feb 2006 Location: Ontario Posts: 145	Re: I want to see your rear-end loud and proud __________________ 79 GMC Sierra 5.9 cummins, nv4500

03-24-2008, 01:41 AM	#12
kimag2 Registered User Join Date: Feb 2008 Location: Dalhousie N.B. Canada Posts: 19	Re: I want to see your rear-end Thing i will do with my truck, it as a 3/5 drop, will be towing stock car , so i don't have much space to pass the tails.over the rear-end......

03-24-2008, 02:08 AM	#13
chemsearch Registered User Join Date: Feb 2008 Location: Verona, NJ Posts: 45	Re: I want to see your rear-end grande rojo, thats a real creative set up, looks like the license plate fits pretty perfectly on the tailgate __________________ 1986 Chevy K10 4x4 305 Auto

03-24-2008, 04:05 AM	#14
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Re: I want to see your rear-end

03-24-2008, 04:33 AM	#15
ProStreet83C10 Drag Racer Join Date: Nov 2006 Location: Mason City, Iowa Posts: 1,276	Re: I want to see your rear-end __________________ Zach Hall 1983 Chevy C10 R/T: .194 60': 2.322 330: 6.379 1/8: 9.803 MPH: 71.37 1000: 12.781 1/4: 15.314 MPH: 88.79

03-24-2008, 06:24 AM	#16
tvblazer78 Low & Fast! Join Date: Jan 2007 Location: Knoxville, TN Posts: 3,110	Re: I want to see your rear-end This is the only good shot I had.. This is not the way I have it now, but I am going to do it this way later.. Attached Images __________________ Southeastern Mini Truckin' Nationals April 27 and 28, 2012

03-24-2008, 06:48 AM	#17
68Stepbed Registered User Join Date: Mar 2005 Location: 10-Uh-See Posts: 5,609	Re: I want to see your rear-end Mine were slightly angled downward and tucked back in case I ever put a sport bumper on. Attached Images __________________ Matt 68 C10 stepside, LS1/700R4, TCI Engineering suspension system

03-24-2008, 08:00 AM	#21
chromyelow1 OPS GUY Join Date: Jan 2008 Location: Tx Posts: 162	Re: I want to see your rear-end grande rojo, thats looks sweet! if i ever get mine redone thats excatly how to do it.



Register or Log In To remove these advertisements.

03-24-2008, 09:01 AM	#22
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: I want to see your rear-end I run it dumped at the muffler now __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

03-24-2008, 03:43 PM	#23
kimag2 Registered User Join Date: Feb 2008 Location: Dalhousie N.B. Canada Posts: 19	Re: I want to see your rear-end tvblazer78: that would be a nice idea if the pipe would stick out from the 1/4 panel with a chrome basal ....

03-25-2008, 09:06 AM	#24
8T3GMC Registered User Join Date: Dec 2007 Location: Sevierville,TN Posts: 138	Re: I want to see your rear-end __________________ For God so loved the world that He gave His one and only Son to who ever believed shall not perish but have eternal life. Red 8T3 10/2/10 2/29/12 Gracie-Jo PAK-MAN.

03-26-2008, 06:36 AM	#25
87Lowrider Navy Radioman Veteran Join Date: Jul 2007 Location: Western Kentucky Posts: 1,356	Re: I want to see your rear-end Sorry, I couldn't resist! __________________ 1987 Chevrolet R10 Silverado BBC Build thread - SOLD 1986 GMC Sierra Classic - SOLD 1957 Chevy Step Side Daily Driver; 2005 Chevrolet Silverado 4x4 Z71 Stepside - SOLD 2005 Chevrolet Tahoe Z71

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.