Two 87 chevy swb 4x4*

[lvschevytrucks]

lost my job my project has to go parting out 2 trucks,i have lots of new parts if you dont see it ask. parts everywhere
tilt stearing wheel.tight nice shape 100.00
roll bar with lights (for short bed) 75.00
new doors, no glass or hardware, handles and locks shaved 90.00 ec. new fenders 60.00 ec
new inter fenders 35.00 ec new gas tank door 25.00
new cab corners 20.00 ec, rockerpanels 20.00cab mounts.10.00
new complete duel exaust w/ muffler and hangers 175.00
new set of 6 gas shocks 120.00
used door , need work 50.
2 5.0 engines tbi 500.00 ec
2 700 r4 transmissions 250.00 ec
decient 6 ft bed 500.00 6 ft bed that needs lots of work 100. set of new box bolts
roll bar w lights..75.00, nice set of rally wheels w caps, rings and great tires 200.00
frames need work have titles for both one scottsdale, one custom delux to many parts to list hereim willing to hold all large parts for 6 months as long as paid 75% im 20 minutes from I95 and I20 in south carolina

[qksilver]

Do you have a decent cab? I need one for my 86.
Pm me please.
Thanks,
Steve

[lvschevytrucks]

Do you have a decent cab? I need one for my 86.
Pm me please.
Thanks,
Steve
Steve both of my cabs need work.....but if your interested I have all the pieces

[babyJay]

Damn, man. Sorry to hear about the job. That really bites. I'd take a lot of that stuff off your hands and help you out, but I'm afraid I'm too far away. I've been looking for a roll bar for my 79 SWB for a couple years now. Good luck I wish on you.

[lvschevytrucks]

Originally Posted by qksilver

Do you have a decent cab? I need one for my 86.
Pm me please.
Thanks,
Steve

the floor boards are rusted on drivers side I have metal to replace ....i cant get a good picture but the cab mounts are good except the firts brace on the drivers side it is rusted and needs replacing. the cab on the red truck is junk

[qksilver]

not to worried about bottom rust, as long as the supports are good. Mine is rusted along the fire wall so there is a rusted gap about 2 inches wide and 4 feet across,. Plus I have seen the drip rails rust on these, if the top is decent and middle , send me some closer pix.
SCJKOVACH@AOL.COM
Thanks,
Steev

[lvschevytrucks]

Originally Posted by qksilver

not to worried about bottom rust, as long as the supports are good. Mine is rusted along the fire wall so there is a rusted gap about 2 inches wide and 4 feet across,. Plus I have seen the drip rails rust on these, if the top is decent and middle , send me some closer pix.
SCJKOVACH@AOL.COM
Thanks,
Steev

Ill get pictures today....I know the black one is good except there is a sun roof cut out

[benoit454]

I'd like one of those heater boxes off the firewall how much you asking for one? Need it shipped to Logan WV 25601

[lvschevytrucks]

Originally Posted by benoit454

I'd like one of those heater boxes off the firewall how much you asking for one? Need it shipped to Logan WV 25601

10.00 plus the ride? thanks

[benoit454]

I can't drive that far, I'm in wv.

10 sounds good if you can find out how much it cost to ship to me.

[qksilver]

No problem about the sun roof........
Thanks,
Steve

[benoit454]

any idea on shipping yet before you get rid of one or both cabs?

Maybe 20-25 shipped?

let me know as soon as you can because I definately want one and have cash to send.

I need one that aint cracked and just whatever else that's on it or attached you wanna send me would be fine.

I'll take the inside box too blower motor, fan, wiring, heater core whatever, mainly I just need the outside box that's on the firewall, and inside part would be good too.

[spudz]

can I get some better pics of the beds and the new fenders and inner fenders?????? I am not that far away..

[lvschevytrucks]

Originally Posted by spudz

can I get some better pics of the beds and the new fenders and inner fenders?????? I am not that far away..

the fenders and interfenders are brand new ...id love to send you more pictures but im not computer savy and cant figure out how to send more pictures on this sight.

[spudz]

Originally Posted by lvschevytrucks

the fenders and interfenders are brand new ...id love to send you more pictures but im not computer savy and cant figure out how to send more pictures on this sight.

pmed you an offer

[benoit454]

ok I need the inside parts for sure so how much for the outside box on the firewall and the inside part inside the cab for the heater. If you want to include the controls that be fine too.

Again I'm in Logan WV and need them shipped to me I can't pickup.

[lvschevytrucks]

Originally Posted by benoit454

ok I need the inside parts for sure so how much for the outside box on the firewall and the inside part inside the cab for the heater. If you want to include the controls that be fine too.

Again I'm in Logan WV and need them shipped to me I can't pickup.

im sorrry i havent gotten back to you .....ive been very busy and havnt had much time im sure ill be able to get it out and weight this weekend if you still want it

[lvschevytrucks]

Originally Posted by benoit454

ok I need the inside parts for sure so how much for the outside box on the firewall and the inside part inside the cab for the heater. If you want to include the controls that be fine too.

Again I'm in Logan WV and need them shipped to me I can't pickup.

ok, let me get this right, you want the complete box , fan, heater core, harness. do you want the cables , heater control panel for inside. I can pull the complete system for you for everything from the box back and ill let you have it for 35.00. if you want it i need to pull it andd weigh it but im pretty sure that it wont be over 25.00 shipping more like 18.00 but ill let you know

[benoit454]

no prob. I know what you mean I been working alot and haven't had much free time either.

Please just let me know about shipping the whole deal, inside and out to me.

Thanks again.

[b&a72]

Need the engine motor mount brackets shipping to 85240?

[old Rusty C10]

do you have any complete under the bed spare tire carriers if so please price shipped to 11215 in Brooklyn NY

[lvschevytrucks]

Originally Posted by old Rusty C10

do you have any complete under the bed spare tire carriers if so please price shipped to 11215 in Brooklyn NY

sorry sold it yesterday

[LSATERZ28]

Hello
Do you have the right hand and left hand doors to fit 1987 C-10, also driver side front fender, rust free?. would need shipped to plainfield in. 46168.
How much?

thanks
louie

[lvschevytrucks]

Originally Posted by LSATERZ28

Hello
Do you have the right hand and left hand doors to fit 1987 C-10, also driver side front fender, rust free?. would need shipped to plainfield in. 46168.
How much?

thanks
louie

i have them but shipping would kill the deal and you can get them new for less

[spudz]

You got a pm