need help on making my own rims - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bad4587 · 04-14-2008, 12:25 AM

Hey fellas, hope everyone is doing good!!
Well, I've somewhat made a design for my rims. I know that having a company make my rims would be extremely expensive. I've heard of possibly buying some "hoops" and just welding my design onto the rim. Please shed some light on making some rims, hoop sellers or any suggestions i would greatly appreciate!! Thanks for you time.....D.

CAL 58 GMC · 04-14-2008, 07:13 PM

Hey bad4587, it sounds cool that you came up with your own design but I would leave the wheel building to the professionals. So much is depending on those wheels and that’s why everyone forks out the big bucks to buy them and you almost never hear of anyone building there own wheels. Just think about it, you’re rolling down the highway at 70 mph and one of those welds starts to crack. Or you don’t get it centered perfectly straight from side to side or up and down and you will never be able to balance that wheel. Unless you have experience building wheels, I would leave it up to the professionals. Just my two cents worth!

entourageguy · 04-14-2008, 09:35 PM

I'd give Chip a call or talk to them at Boyd's

bad4587 · 04-16-2008, 04:36 AM

Thanks Cal & Entourageguy, really appreciate your sincere feedback!!

I hear ya and agree on "leaving it to the pro's," rolling on crackers ain't safe at all!! I'm really buying up to date rims, i got my eye on a few but don't know which one's just yet.

Making my own rims or rim is just a side project that I'm very curious to see if i can make my design work, even if its just a mock up, it'll be fun. These rims are/were to be part of my 53 chevy pick up build which i'll hopefully be starting this summer.

thanks for taking the time to reply fellas, i'll keep you all posted!
L8r,
bad4587

Atomsplitter · 04-16-2008, 06:38 AM

I know a smalll shop in Oshawa that does machining on rims. My wife slid my 1995 Cutlass Convertable into the curb a few years ago and bent the lower controle arm and cracked the rim. The firts rim I had was bent and they had it all set up in the lathe to machine it. They also spin balance the rim after it's machined.
If your interested I can look them up. Maybe they can machine your pattern from an aluminum blank?

04-14-2008, 12:25 AM	#1
bad4587 Registered User Join Date: Jul 2007 Location: Rio Rancho, N.M. Posts: 22	need help on making my own rims Hey fellas, hope everyone is doing good!! Well, I've somewhat made a design for my rims. I know that having a company make my rims would be extremely expensive. I've heard of possibly buying some "hoops" and just welding my design onto the rim. Please shed some light on making some rims, hoop sellers or any suggestions i would greatly appreciate!! Thanks for you time.....D.

04-14-2008, 07:13 PM	#2
CAL 58 GMC Senior Member Join Date: Jun 2005 Location: Clovis Ca. Posts: 3,311	Re: need help on making my own rims Hey bad4587, it sounds cool that you came up with your own design but I would leave the wheel building to the professionals. So much is depending on those wheels and that’s why everyone forks out the big bucks to buy them and you almost never hear of anyone building there own wheels. Just think about it, you’re rolling down the highway at 70 mph and one of those welds starts to crack. Or you don’t get it centered perfectly straight from side to side or up and down and you will never be able to balance that wheel. Unless you have experience building wheels, I would leave it up to the professionals. Just my two cents worth! __________________ Classic Trucks Link http://www.classictrucks.com/feature...uck/index.html 1958 GMC.Project Build http://67-72chevytrucks.com/vboard/s...d.php?t=162816 1966 Chevelle Build http://67-72chevytrucks.com/vboard/s...d.php?t=443576 Video http://www.youtube.com/watch?v=prrNKo8F7Zw#GU5U2spHI_4 Last edited by CAL 58 GMC; 04-14-2008 at 07:16 PM.

04-14-2008, 09:35 PM	#3
entourageguy Yellow truck club Join Date: Apr 2006 Location: Barrie Ontario Posts: 2,080	Re: need help on making my own rims I'd give Chip a call or talk to them at Boyd's __________________ ................................................................ Brian ...... My hub garage address http://www.hubgarage.com/mygarage/59apache I gue$$ everything has it'$ price ALL GONE NOW *59 Chev Apache* *PRAISE THE LOWERED* 350 700r lokar shifter power MII front end, shockwaves tilt, 4 wheel discs 4-link and bags 10 bolt limited

04-16-2008, 04:36 AM	#4
bad4587 Registered User Join Date: Jul 2007 Location: Rio Rancho, N.M. Posts: 22	Re: need help on making my own rims Thanks Cal & Entourageguy, really appreciate your sincere feedback!! I hear ya and agree on "leaving it to the pro's," rolling on crackers ain't safe at all!! I'm really buying up to date rims, i got my eye on a few but don't know which one's just yet. Making my own rims or rim is just a side project that I'm very curious to see if i can make my design work, even if its just a mock up, it'll be fun. These rims are/were to be part of my 53 chevy pick up build which i'll hopefully be starting this summer. thanks for taking the time to reply fellas, i'll keep you all posted! L8r, bad4587

04-16-2008, 06:38 AM	#5
Atomsplitter Registered User Join Date: Mar 2006 Location: Ontario Posts: 514	Re: need help on making my own rims I know a smalll shop in Oshawa that does machining on rims. My wife slid my 1995 Cutlass Convertable into the curb a few years ago and bent the lower controle arm and cracked the rim. The firts rim I had was bent and they had it all set up in the lathe to machine it. They also spin balance the rim after it's machined. If your interested I can look them up. Maybe they can machine your pattern from an aluminum blank?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.