My new toy - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Anthony Fremont · 05-10-2008, 05:06 PM

New member here, hello all. I just got a new project truck. It seems to be relatively unmolested and solid. A few dings but fairly straight. There's a little bit of rust on the cab corners and a very tiny amount of rust-through in the foot area. Everywhere else looks perfect so far. Not sure what year it is yet.

http://i55.photobucket.com/albums/g1...mont/64GMC.jpg

The other side looks the same. All the glass is perfect, windows and doors work fine, GMC AM radio still in the dash. Alas the original V6 is lost to history, but the powerglide is still in there. There's an 80ish looking small block V8 sitting under the hood that allegedly will run, but all the accessories are off the engine asif someone was taking it all apart then stopped. Is it unusual to have what appears to be factory power steering? How about two spares? I paid $600, did I get screwed?

62 short step · 05-10-2008, 05:12 PM

Welcome! $600, looks like a good deal to me! Its 64-66 range for sure.

bpmcgee · 05-10-2008, 05:40 PM

If you needed to, you could probably part it out for $600, so I think you got a good deal

I'm not sure about GMCs, but I don't think power steering was available in '64. It certainly wasn't in 60.

B

Anthony Fremont · 05-10-2008, 09:56 PM

Quote:

Originally Posted by bpmcgee

If you needed to, you could probably part it out for $600, so I think you got a good deal

Part it out.....surely you jest.

Quote:

I'm not sure about GMCs, but I don't think power steering was available in '64.

Tomsriv · 05-10-2008, 10:09 PM

Its amazing how half-a$$ some people can be. Nice engine install, lol. Looks like a fun project truck.

Anthony Fremont · 05-10-2008, 10:56 PM

Quote:

Originally Posted by Tomsriv

Its amazing how half-a$$ some people can be. Nice engine install, lol. Looks like a fun project truck.

Fortunately they didn't get far when it was their project. :-)

66Gilbert · 05-10-2008, 11:53 PM

Hello and welcome to the board. I just wanted to let you know that the power steering is factory. I had one on a 1965 Chevrolet C20 that I stripped down for parts and sold the the power steering unit minus the pump on Ebay for $450.75. So I would say you did good buying that truck for $600. I also had one on a 1965 GMC 4x4 that I bought to strip down for parts. At the time I did not know what it was and I threw it away. I don't know if it was factory being it was on a 4x4 because I have never seen another one on a 60-66 4x4, Chevy or GMC.

TimE · 05-11-2008, 12:13 AM

Looks like you got your moneys worth to me. And yes, that is an original power steering setup on your truck. Nice starting point for a good project.

Iron-Butt · 05-11-2008, 02:06 PM

Welcome from Katy, Tx

salazar44 · 05-12-2008, 10:55 AM

nice... love the big rear window!

FRENCHBLUE72 · 05-12-2008, 10:18 PM

Looks like apretty good score welcome from southern oregon..

Anthony Fremont · 08-19-2014, 02:31 PM

It's been a while, but I'm back now. Life got in the way with working on the truck, then I got sick for a while. Feeling better now than I have for 20 years, no kidding. Truck sat for the last couple of years, squirrels made a home in my engine compartment and messed up my paint and alumicoat headers, but I can fix it. Got it inspected and a clear blue title is only $500 away. Driveway needs some work though.

I kid you guys not, a man tried to trade me a '99 mercedes slk230 hardtop convertible for it just last week, even up. I guess these things have gotten more rare in the past few years. People give me way more compliments than they do for my IROC. And just look at that mashed up passenger fender. Every panel on it has a crease or a dent of some kind. Even the roof.

I have pretty much all the stainless trim. I put my V6 emblems on today and the Custom emblems for the cab.

Man I got at least 200 hours in this thing and it barely looks any better than the first pic in the thread. Worse in some ways. But it's drivable and sounds awesome. Only a 305, but it's fresh built with a summit mild cam. I got the motor from a rebuilder that was going out of business a few years back. Rebuilt short block 305 for $200 that came out of a 91 z28. It's a roller cam block, but has a plain hydraulic cam in it.

Straydog · 08-19-2014, 11:46 PM

Welcome!
Looks like a good one to me, hey at least yours has a Chevy motor in it.
Mine came with a Mopar 360 in it!!!

Anthony Fremont · 08-20-2014, 03:44 AM

Quote:

Originally Posted by Straydog

Welcome!
Looks like a good one to me, hey at least yours has a Chevy motor in it.
Mine came with a Mopar 360 in it!!!

Yeah, I love my truck especially now that I can drive it. It was a ton of work. Project is not a big enough word, more like a quest or magnum opus.

What kind of mess did they previous owner make when they installed the 360? My motor came with chains and these mounts:

Straydog · 08-20-2014, 10:52 PM

Well at least yours has 2 bolt holes for the mount

Ya gotta love they used a carrage (sp) bolt on mine

[IMG]

[/IMG]

Straydog · 08-20-2014, 10:55 PM

One more...

[IMG]

[/IMG]

05-10-2008, 05:06 PM	#1
Anthony Fremont Registered User Join Date: May 2008 Location: houston, tx Posts: 549	My new toy New member here, hello all. I just got a new project truck. It seems to be relatively unmolested and solid. A few dings but fairly straight. There's a little bit of rust on the cab corners and a very tiny amount of rust-through in the foot area. Everywhere else looks perfect so far. Not sure what year it is yet. http://i55.photobucket.com/albums/g1...mont/64GMC.jpg The other side looks the same. All the glass is perfect, windows and doors work fine, GMC AM radio still in the dash. Alas the original V6 is lost to history, but the powerglide is still in there. There's an 80ish looking small block V8 sitting under the hood that allegedly will run, but all the accessories are off the engine asif someone was taking it all apart then stopped. Is it unusual to have what appears to be factory power steering? How about two spares? I paid $600, did I get screwed?

05-10-2008, 05:12 PM	#2
62 short step Senior Member Join Date: Aug 2005 Location: Greenwell Springs, Louisiana Posts: 2,882	Re: My new toy Welcome! $600, looks like a good deal to me! Its 64-66 range for sure.

05-10-2008, 05:40 PM	#3
bpmcgee Registered User Join Date: Mar 2003 Location: Northern Illinois Posts: 2,181	Re: My new toy If you needed to, you could probably part it out for $600, so I think you got a good deal I'm not sure about GMCs, but I don't think power steering was available in '64. It certainly wasn't in 60. B

05-10-2008, 10:09 PM	#5
Tomsriv Registered User Join Date: Apr 2007 Location: Camarillo, CA Posts: 257	Re: My new toy Its amazing how half-a$$ some people can be. Nice engine install, lol. Looks like a fun project truck.

05-10-2008, 11:53 PM	#7
66Gilbert 1966 Crew Cab & 4X4 Fanatic Join Date: Dec 2005 Location: Arizona Posts: 904	Re: My new toy Hello and welcome to the board. I just wanted to let you know that the power steering is factory. I had one on a 1965 Chevrolet C20 that I stripped down for parts and sold the the power steering unit minus the pump on Ebay for $450.75. So I would say you did good buying that truck for $600. I also had one on a 1965 GMC 4x4 that I bought to strip down for parts. At the time I did not know what it was and I threw it away. I don't know if it was factory being it was on a 4x4 because I have never seen another one on a 60-66 4x4, Chevy or GMC. Last edited by 66Gilbert; 05-11-2008 at 06:08 PM.

05-11-2008, 12:13 AM	#8
TimE Hey Y'all!! Join Date: Dec 2007 Location: Bay Minette, Alabama Posts: 1,755	Re: My new toy Looks like you got your moneys worth to me. And yes, that is an original power steering setup on your truck. Nice starting point for a good project.

05-11-2008, 02:06 PM	#9
Iron-Butt 454 club Join Date: Oct 2002 Location: Oklahoma Posts: 1,348	Re: My new toy Welcome from Katy, Tx __________________ David 1965 Chevrolet c-10 454 automatic Custom bbw swb. 1965 Chevrolet C-10 swb (Sold) 1963 Chevrolet C-10 6 Cyl automatic with dual exhaust, pb, ps and 17's. R.I.P "I will miss you. 1967 Chevrolet C-10 6 Cyl Custom lwb 1939 Chevrolet Coupe, 350 v8 automatic. 1935 Chevrolet 2 Dr Standard in the works. 2015 Harley Davidson Street Glide. 2023 Chevrolet Stingray Z51 Convertible. I never want to grow up.

05-12-2008, 10:55 AM	#10
salazar44 65 - Chevy C10 Join Date: Jun 2006 Location: Los Angeles, CA Posts: 625	Re: My new toy nice... love the big rear window! __________________ VIC One Repair Leads to Another! http://vix65chevyc10.blogspot.com

05-12-2008, 10:18 PM	#11
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: My new toy Looks like apretty good score welcome from southern oregon.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

08-19-2014, 02:31 PM	#12
Anthony Fremont Registered User Join Date: May 2008 Location: houston, tx Posts: 549	Re: My new toy It's been a while, but I'm back now. Life got in the way with working on the truck, then I got sick for a while. Feeling better now than I have for 20 years, no kidding. Truck sat for the last couple of years, squirrels made a home in my engine compartment and messed up my paint and alumicoat headers, but I can fix it. Got it inspected and a clear blue title is only $500 away. Driveway needs some work though. I kid you guys not, a man tried to trade me a '99 mercedes slk230 hardtop convertible for it just last week, even up. I guess these things have gotten more rare in the past few years. People give me way more compliments than they do for my IROC. And just look at that mashed up passenger fender. Every panel on it has a crease or a dent of some kind. Even the roof. I have pretty much all the stainless trim. I put my V6 emblems on today and the Custom emblems for the cab. Man I got at least 200 hours in this thing and it barely looks any better than the first pic in the thread. Worse in some ways. But it's drivable and sounds awesome. Only a 305, but it's fresh built with a summit mild cam. I got the motor from a rebuilder that was going out of business a few years back. Rebuilt short block 305 for $200 that came out of a 91 z28. It's a roller cam block, but has a plain hydraulic cam in it. __________________ ------------------------------- '66 GMC Custom Fenderside LWB '90 IROC - L98 '97 1200C Sportster Last edited by Anthony Fremont; 08-19-2014 at 02:44 PM.

08-19-2014, 11:46 PM	#13
Straydog Registered User Join Date: Jul 2014 Location: Westpoint,Tennessee Posts: 64	Re: My new toy Welcome! Looks like a good one to me, hey at least yours has a Chevy motor in it. Mine came with a Mopar 360 in it!!!

08-20-2014, 10:52 PM	#15
Straydog Registered User Join Date: Jul 2014 Location: Westpoint,Tennessee Posts: 64	Re: My new toy Well at least yours has 2 bolt holes for the mount Ya gotta love they used a carrage (sp) bolt on mine [IMG][/IMG] Last edited by Straydog; 08-20-2014 at 11:15 PM.

08-20-2014, 10:55 PM	#16
Straydog Registered User Join Date: Jul 2014 Location: Westpoint,Tennessee Posts: 64	Re: My new toy One more... [IMG][/IMG]

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.