|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
05-25-2008, 04:00 AM
|
#1 |
|
It followed me home?
Join Date: Mar 2003
Location: Yup
Posts: 5,751
|
changed fuel pump, now no brakes and high idle
Changed my fuel pump and in the process I took the air cleaner assembly etc. off so I could dump a little fuel in the carb. Well I got the truck running again but it idles really high and the brakes arent working so I assume I knocked a vacuum line off somewhere but I cant see anything not hooked up? Any idea where to look? Picture would be great if you have them
__________________
Adam That's why they call it a shortcut Kyle, if it was easy it would just be the way. 86 c-10 SWB 85 CCSB 90 GMC K30 Crew SRW 1985 C30 Dually |
|
|
|
05-25-2008, 05:39 AM
|
#2 |
|
Robert Olson Transport
 
Join Date: Oct 2002
Location: recent transplant to NC USA
Posts: 20,310
|
Re: changed fuel pump, now no brakes and high idle
maybe you split a vacuum line? is it possible you have the air cleaner on wrong so the linkage is hanging up?
__________________
Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!! |
|
|
|
|
05-25-2008, 06:53 AM
|
#3 |
|
Senior Member
Join Date: May 2004
Location: Caldwell,Tx.
Posts: 3,648
|
Re: changed fuel pump, now no brakes and high idle
The brake booster line should come from the rear of the carb at the base or a port on the intake also at the rear of the carb . I would look there . Just follow the Vac line from the booster to the vac source . Frank
__________________
Born and proudly residing in a Red State ! |
|
|
|
|
05-25-2008, 04:54 PM
|
#4 |
|
Registered User
Join Date: Nov 2007
Location: Indianapolis
Posts: 1,161
|
Re: changed fuel pump, now no brakes and high idle
take the air cleaner off, get a flashlight and look and listen for a leak. get a buudy to help. 2 pair of eyes always help
|
|
|
|
|
05-25-2008, 06:01 PM
|
#5 |
|
Happy to be here
Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,021
|
Re: changed fuel pump, now no brakes and high idle
Frank has the answer. The vacuum line that feeds the brake booster is of or split as Bob suggested. That's killing the brakes and causing it to go lean as well.
__________________
Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" |
|
|
|
|
05-25-2008, 06:26 PM
|
#6 |
|
Registered User
Join Date: Jan 2008
Location: Lakeworth, Fl
Posts: 633
|
Re: changed fuel pump, now no brakes and high idle
Maybe this could help you.. this is the vacuum line and goes to the brake booster
__________________
2001 silverado 2wd 2003 silverado 4wd 1975 scottsdale c10 (project) |
|
|
|
|
05-26-2008, 05:57 PM
|
#7 |
|
It followed me home?
Join Date: Mar 2003
Location: Yup
Posts: 5,751
|
Re: changed fuel pump, now no brakes and high idle
Thanks for the help everyone, I R DuM ha ha. Turns out the cruise control module got stuck and was keeping the throttle cable pulled, the brakes worked ok the motor was just trying to push through the brakes ha ha.
__________________
Adam That's why they call it a shortcut Kyle, if it was easy it would just be the way. 86 c-10 SWB 85 CCSB 90 GMC K30 Crew SRW 1985 C30 Dually |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
