Got a deal for someone

[poorboy]

I am going to start getting the parts I need of the longbed truck for the shortbed project. If someone shows up with a trailer(and maybe some beer) they can have the roller. I'm keeping the wiring,wiper setup,grill,bumpers,dash,ect.. The tags expired in May. The title is in my name. I cannot store it so It will have to be picked up fairly quick. First reponse will have first dibs and we will go down the line. I don't want to send this to the crusher so someone needs to come get it.

[pquick]

where is is it located? interested.

[hewlett2002000]

i would jump on that in second if i wasent so far away....

[poorboy]

I'm in Atascadero,Ca. I know if I parted this thing out I could make a few bucks. I would rather help someone out geting there's done though.

[pquick]

We are worlds away...thanks for the opportunity though.

[ChiefRocka]

Originally Posted by poorboy

I am going to start getting the parts I need of the longbed truck for the shortbed project. If someone shows up with a trailer(and maybe some beer) they can have the roller. I'm keeping the wiring,wiper setup,grill,bumpers,dash,ect.. The tags expired in May. The title is in my name. I cannot store it so It will have to be picked up fairly quick. First reponse will have first dibs and we will go down the line. I don't want to send this to the crusher so someone needs to come get it.

What all is included in the "roller" ?? Pictures ?

Im in San Jose...kinda interested.

PM me your address, so I can figure out how far you are.....

Thanks...

[poorboy]

It will have a complete body minus the hood. Al the glass and a spare windshield. Complete bed minus the chains for the tailgate and tail lights. Complete single exhaust with manifolds. Trans will be in the truck. Ferder wells and rad support.

[poorboy]

[poorboy]

There is a spot on the right side of the bed that is munched. Right in front of the rear tire. Other than that the bed is in good shape

[83burban]

What year? How is the cab with regards to rust and damage? I have a 62 cab but it wont work with-out some mods for the 64 frame that I am trying to get it on, and I don't have a welder to do the work. I think that a 63 cab would work (need measurement of the front two cab mounting holes width apart if you don't mind). I am in Los Angeles and could bring the 62 cab with me to go with your stuff if interested plus some - my cell is 626.298.4897 - Kurt (if that easier for you)

[ChiefRocka]

I was interested in the chassis...so mabey we could work something out....

He is located about 160 north of me (SanJose).....I could bring it to my shop, then you could grab the cab off of it.

What you think ?

[83burban]

Chief - If that cab works for me then I think that we could defnitely work something out - thanks for the offer.

[ChiefRocka]

I figured it's a little closer to you.....160 miles is 160 miles !

Also, I have forklift access as well.

Let me know.....

[joe231]

'63-'66 cabs are interchangeable

[72BlckButy]

I could use that bed out here in Missouri... nice score guys! Board members helping board members, it doesn't get any better than that.

[poorboy]

I got the motor,grill,bumbper and most of the wiring out today. Would like to have it gone by next Sat. Wil that work for you guys?

[83burban]

PM sent

[ChiefRocka]

Not sure what 64c20 has in mind, but I might be able to swing by sometime this week....mabey towards the end of the week....

How does that sound ?

[poorboy]

Whatever works for me. He wants the cab so I guess if nothing else we could take it off and put it in the drive way until he comes up. I work 8-5 Mon-Fri and can work through lunch to get off early if need be.

[ChiefRocka]

Oh ok...did you want to leave the cab at your place ?

I was willing to tow the whole thing back to my place, then lift it off at my shop with the forklift.

A little less for him to drive, but whatever works for you.

Would this coming weekend be better for you ?

[poorboy]

I thought he was in LA. If he's up your way then take the whole thing. Coming during the week is fine with me.

[ChiefRocka]

He is.....

It would just be a bit closer for him...and less trouble for you.

[poorboy]

I'm in the middle of the 2 of you. I live in Atascadero witch is 20min north of Pismo Beach.

[ChiefRocka]

OH CRAP...my bad....I got my directions mixed up....I had the wife check for me on my GPS...for some reason I was thinking north...anyway...Well then,

I would like the rolling chassis.....do you know if it has been in any major collisions ??

Will the bed and tailgate come with it ??

Later...

Sorry about the 'my' confusion

[poorboy]

The bed goes. It has a munch in front of the rr tire. To my knowledge it has not been in to major collisions. I got it from the og's grandson. It was used to haul a camper and work around the ranch. The mucnh was from getting high centered by the og's grandson. The tailgate has a couple of dents but you can have it too. I will be keeping the chains for the short bed.