Is the only difference? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

62ChevyStep · 06-12-2008, 01:03 AM

Finnally took my doors all apart (window assemblies, vent windowetc) since it seems everyone else is doing this project or has just recently completed it.

Anyhow my drivers side has the window with the frame and my Passenger side is without.

My question is this: can you mount a non-framed window in a "framed" lower bracket/channel?

The only difference I can see is the little "tabs" that the frame that goes around the glass connects to on the lower channel bracket.

I want to put replacement glass in without the frame around it.

sorry if this is confusing

62 short step · 06-12-2008, 07:08 AM

Yes you can, my 62 had the frame around the glass. My 61 did not, and the bottom channel was the same. The frame just screws to the bottm channel.

62ChevyStep · 06-12-2008, 12:36 PM

Quote:

Originally Posted by 62 short step

Yes you can, my 62 had the frame around the glass. My 61 did not, and the bottom channel was the same. The frame just screws to the bottm channel.

Thanks, for the info, I thought that is all it was but thought I had better ask. I Love This Board!

63sbssbbw · 06-12-2008, 09:48 PM

That's funny ,I was just going to ask the exact same Q this morning

06-12-2008, 01:03 AM	#1
62ChevyStep Senior Member Join Date: May 2005 Location: Portales, NM Posts: 359	Is the only difference? Finnally took my doors all apart (window assemblies, vent windowetc) since it seems everyone else is doing this project or has just recently completed it. Anyhow my drivers side has the window with the frame and my Passenger side is without. My question is this: can you mount a non-framed window in a "framed" lower bracket/channel? The only difference I can see is the little "tabs" that the frame that goes around the glass connects to on the lower channel bracket. I want to put replacement glass in without the frame around it. sorry if this is confusing __________________ ________________________ 62' 3.5/5 drop SWB Fleet, PS, PB-Dsk/Drm,350/700R4 08' Chevrolet Silverado CrewCab 05'Toyota Tacoma Prerunner SR5

06-12-2008, 07:08 AM	#2
62 short step Senior Member Join Date: Aug 2005 Location: Greenwell Springs, Louisiana Posts: 2,882	Re: Is the only difference? Yes you can, my 62 had the frame around the glass. My 61 did not, and the bottom channel was the same. The frame just screws to the bottm channel. __________________ www.louisianaclassictruckclub.com 1965 c-10 86 chevy c/k 20

06-12-2008, 09:48 PM	#4
63sbssbbw UCA63 Join Date: Aug 2005 Location: Lloydminster AB Can. Posts: 1,637	Re: Is the only difference? That's funny ,I was just going to ask the exact same Q this morning __________________ member#7816 "63 sb ss bbw 350\350 12 bolt rear Pwr Fr Disc PS tilt '61 GMC in progress '63 GMC to use for parts '90 Chevy Ext cab sbfs 5.7l (current d d)

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.