step side fenders - The 1947 - Present Chevrolet & GMC Truck Message Board Network

65chevy4x4 · 06-18-2008, 01:12 AM

Is there a special tool to take step side fenders off the bed?Or what is the best way to take them off?--Thanks

PDW HOTRODS · 06-19-2008, 12:49 AM

They are just bolted on, but they use clutch head bolts. You can get clutch head screw drivers at Sears, but these days they might not keep them in stock.

CAL 58 GMC · 06-19-2008, 01:46 AM

Here's a set I found on e-bay. http://cgi.ebay.com/ebaymotors/Clutc...spagenameZWDVW

**mr48chev** · 06-19-2008, 02:48 AM

I think I picked up my last ones at Ace hardware. You should also be able to get them at Sears but may have to order them. You should be able to find some bits that you can put in the adapter and use on a small ratchet.

Snap-On has some nice ones but they are a bit spendy. http://buy1.snapon.com/catalog/item....re&dir=catalog

Also get up under the fenders and spray some PB blaster on the nuts after you brush them and the head of the screw/bolt off with a wire brush first. It will save you a lot of grunt and groan and probably help save the clutch head screws to be used again.

65chevy4x4 · 06-19-2008, 09:35 AM

Thanks guy's---Now i know what kind of tool to get.

orgalmeister · 06-19-2008, 07:48 PM

Also check your local NAPA.

06-18-2008, 01:12 AM	#1
65chevy4x4 Registered User Join Date: Oct 2007 Location: ST. Joseph MO. Posts: 38	step side fenders Is there a special tool to take step side fenders off the bed?Or what is the best way to take them off?--Thanks

06-19-2008, 12:49 AM	#2
PDW HOTRODS Registered User Join Date: Nov 2006 Location: Sutherlin Oregon Posts: 502	Re: step side fenders They are just bolted on, but they use clutch head bolts. You can get clutch head screw drivers at Sears, but these days they might not keep them in stock.

06-19-2008, 01:46 AM	#3
CAL 58 GMC Senior Member Join Date: Jun 2005 Location: Clovis Ca. Posts: 3,311	Re: step side fenders Here's a set I found on e-bay. http://cgi.ebay.com/ebaymotors/Clutc...spagenameZWDVW __________________ Classic Trucks Link http://www.classictrucks.com/feature...uck/index.html 1958 GMC.Project Build http://67-72chevytrucks.com/vboard/s...d.php?t=162816 1966 Chevelle Build http://67-72chevytrucks.com/vboard/s...d.php?t=443576 Video http://www.youtube.com/watch?v=prrNKo8F7Zw#GU5U2spHI_4

06-19-2008, 02:48 AM	#4
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,711	Re: step side fenders I think I picked up my last ones at Ace hardware. You should also be able to get them at Sears but may have to order them. You should be able to find some bits that you can put in the adapter and use on a small ratchet. Snap-On has some nice ones but they are a bit spendy. http://buy1.snapon.com/catalog/item....re&dir=catalog Also get up under the fenders and spray some PB blaster on the nuts after you brush them and the head of the screw/bolt off with a wire brush first. It will save you a lot of grunt and groan and probably help save the clutch head screws to be used again. Last edited by mr48chev; 06-19-2008 at 02:53 AM.

06-19-2008, 09:35 AM	#5
65chevy4x4 Registered User Join Date: Oct 2007 Location: ST. Joseph MO. Posts: 38	Re: step side fenders Thanks guy's---Now i know what kind of tool to get.

06-19-2008, 07:48 PM	#6
orgalmeister Registered User Join Date: Aug 2004 Location: North Carolina Posts: 291	Re: step side fenders Also check your local NAPA. __________________ '56 truck (the never ending project) '06 Z/71 loaded (daily driver) '07 Mercedes-Benz C-Class (wife's driver) Gone: 72 SB, 67 CST, 57 BBW, 47 Panel streetrod,

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.