Anybody using these seats? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70c10 · 08-08-2008, 09:08 AM

I think these are from 91' or 92' Blazers. Anybody using these or have pics installed? I like them because they are low back. Did you have to trim the seat bases to lower them?

*ksjh1316* · 08-08-2008, 09:46 AM

I have wondered the same thing as I cam get a takeoff leather pair but didn't know how bad the install would be

Andy4639 · 08-08-2008, 09:47 AM

I'm using a 60-40 out of a 89-90 model truck. Didn't do anything to them but mount.

eseaton · 08-08-2008, 10:13 AM

I had to make my own brackets but I like em anyway

70c10 · 08-08-2008, 11:17 PM

After seeing Andy's pic I realize the height is actually perfect because it sits below the rear glass but I think I'll stick with a bench and just sell these. Thanks again guys!

eseaton · 08-09-2008, 02:08 AM

any idea how much you want for them

70c10 · 08-11-2008, 10:55 AM

$100 includes the red velour console that came with them when I bought them. The problem is I don't want to ship these.

eseaton · 08-12-2008, 07:35 PM

well i guess thats out then i am going to black and grey intirior on my 67, the seats are from my daily driver an 89 chevy, put fox body buckets in it so i had to fab mounts for the 67. You said the console is red right? So did you have the seats redone, and who did them my shops here said they wouldnt cause the cloth is glued to the foam.

70c10 · 08-12-2008, 08:38 PM

The red console that came with these is out of who knows what? The fabric looks very similar to the early 90's Chevy trucks. These seats are original fabric. I was going to use these guys to make my covers for these http://www.desertsunauto.com/. They do great work

tcb-1 · 08-12-2008, 08:56 PM

I drove a company truck in the early 90's that had the low backs in it and they were quite comfy!

eseaton · 08-12-2008, 10:03 PM

thanks for the site been having trouble finding anything that didnt have headrests.

70c10 · 08-12-2008, 10:09 PM

Quote:

Originally Posted by eseaton

thanks for the site been having trouble finding anything that didnt have headrests.

No problem. That's why I originally bought these because the low backs without the headrests are hard to find in this color. Desert Sun does nice work!

08-08-2008, 09:08 AM	#1
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Anybody using these seats? I think these are from 91' or 92' Blazers. Anybody using these or have pics installed? I like them because they are low back. Did you have to trim the seat bases to lower them? Attached Images __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads Last edited by 70c10; 08-08-2008 at 09:10 AM.

08-08-2008, 09:46 AM	#2
ksjh1316 Account Suspended Join Date: Jul 2007 Location: Wichita KS Posts: 1,599	Re: Anybody using these seats? I have wondered the same thing as I cam get a takeoff leather pair but didn't know how bad the install would be

08-08-2008, 09:47 AM	#3
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Anybody using these seats? I'm using a 60-40 out of a 89-90 model truck. Didn't do anything to them but mount. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

08-08-2008, 10:13 AM	#4
eseaton Registered User Join Date: Jul 2008 Location: Amarillo, TX Posts: 190	Re: Anybody using these seats? I had to make my own brackets but I like em anyway

08-08-2008, 11:17 PM	#5
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Re: Anybody using these seats? After seeing Andy's pic I realize the height is actually perfect because it sits below the rear glass but I think I'll stick with a bench and just sell these. Thanks again guys! __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

08-09-2008, 02:08 AM	#6
eseaton Registered User Join Date: Jul 2008 Location: Amarillo, TX Posts: 190	Re: Anybody using these seats? any idea how much you want for them

08-11-2008, 10:55 AM	#7
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Re: Anybody using these seats? $100 includes the red velour console that came with them when I bought them. The problem is I don't want to ship these. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

08-12-2008, 07:35 PM	#8
eseaton Registered User Join Date: Jul 2008 Location: Amarillo, TX Posts: 190	Re: Anybody using these seats? well i guess thats out then i am going to black and grey intirior on my 67, the seats are from my daily driver an 89 chevy, put fox body buckets in it so i had to fab mounts for the 67. You said the console is red right? So did you have the seats redone, and who did them my shops here said they wouldnt cause the cloth is glued to the foam.

08-12-2008, 08:38 PM	#9
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Re: Anybody using these seats? The red console that came with these is out of who knows what? The fabric looks very similar to the early 90's Chevy trucks. These seats are original fabric. I was going to use these guys to make my covers for these http://www.desertsunauto.com/. They do great work __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

08-12-2008, 08:56 PM	#10
tcb-1 Nothing to see here..... Join Date: Jun 2007 Location: Shawnee, KS Posts: 4,625	Re: Anybody using these seats? I drove a company truck in the early 90's that had the low backs in it and they were quite comfy! __________________ Doug THANK YOU to our American Soldiers & Veterans - POW MIA "You will NEVER be forgotten". The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson

08-12-2008, 10:03 PM	#11
eseaton Registered User Join Date: Jul 2008 Location: Amarillo, TX Posts: 190	Re: Anybody using these seats? thanks for the site been having trouble finding anything that didnt have headrests.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.