Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
08-08-2008, 09:31 PM | #1 |
Registered User
Join Date: Apr 2007
Location: Southern Maryland
Posts: 209
|
hydroboost pics please!
If anyone has pics of the power steering pump brackets for a 350 could you please post them I'm pretty sure I'm missing one.Thanks in advance.
|
08-09-2008, 01:03 AM | #2 |
Manual Transmission Club
Join Date: May 2008
Location: Grand Junction CO
Posts: 292
|
Re: hydroboost pics please!
This isn't the best picture. It's raining right now but I'll get a better picture tomorrow, unless someone else beats me to it. There is another bracket that you can’t see in this picture on the side opposite of the bracket you can see.
__________________
79 GMC Sierra Grande, SWB, Heavy Half If I wanted easy I would just buy a NEW truck! |
08-09-2008, 02:00 PM | #3 |
Registered User
Join Date: Apr 2007
Location: Southern Maryland
Posts: 209
|
Re: hydroboost pics please!
thanks for the pic but mine has a different setup than that.maybe I have the diesel brackets still?
Last edited by 84lwb; 08-09-2008 at 02:00 PM. |
08-09-2008, 02:25 PM | #4 |
Registered User
Join Date: Sep 2005
Location: Sun City West, Az
Posts: 3,822
|
Re: hydroboost pics please!
if i remember right.(which isn't very often sometimes)...the brackets aren't any different on the pump for hydro boost than any other setup.water pump length.short or long is what it's set up by.are you wanting a pump bracket pic or the hydroboost unit?i can getcha one later just need to know exactly what you want?
__________________
" Never look up a dead dogs butt." |
08-09-2008, 03:02 PM | #5 |
Registered User
Join Date: Apr 2007
Location: Southern Maryland
Posts: 209
|
Re: hydroboost pics please!
here's the deal.my truck was originaly a diesel,someone changed it to a 350.when I got it the left head was off with some of the PS brackets.my PS pump looks the same as the one on my land lords 73 and 79's pic but my bracket covers the entire front of my pump and has one that bolts to the bottom of the block and one on the top that bolts to another bracket but I have no bracket to bolt it to!I'll try to get a pic or two today of what I have and post them.
|
08-09-2008, 11:25 PM | #6 |
Registered User
Join Date: Apr 2007
Location: Southern Maryland
Posts: 209
|
Re: hydroboost pics please!
Here's some pics.
|
08-09-2008, 11:46 PM | #7 |
Registered User
Join Date: Apr 2007
Location: Southern Maryland
Posts: 209
|
Re: hydroboost pics please!
couple more,the last one is some brackets that were in the truck when I got it
Last edited by 84lwb; 08-10-2008 at 12:02 AM. |
08-10-2008, 02:52 PM | #8 |
Registered User
Join Date: Sep 2005
Location: Sun City West, Az
Posts: 3,822
|
Re: hydroboost pics please!
here's what i'd do, and it is what i did.....you got alot of time into that motor.and it look's good by the way.check out these guy's.http://www.alangrovecomponents.comthey'll get you the right one's the first time.it may cost you a little more than you'd like.but,it beats bangin your head against the wall and running all over to different wrecking yards trying to find what you need. their not cheap pot metal like the factory one's.there nice raw steel that you can paint your color's..call them.it's easier than trying to get the right one's from their website.they really will take the time to get you the right one's.i was really impressed with their knowledge of their products and the quality.iv'e turned a few other board members on to them and everybodies been happy.i don't really have a closeup bracket pic on file.maybe you can see some in this one.ther's the ol hydro booster up in the corner.
__________________
" Never look up a dead dogs butt." Last edited by boatpuller; 08-10-2008 at 02:57 PM. |
08-10-2008, 04:21 PM | #9 |
Registered User
Join Date: Apr 2007
Location: Southern Maryland
Posts: 209
|
Re: hydroboost pics please!
thanks for the info and the compliment!I'll check that site and see what I can find.
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|