Inside Door Pictures - The 1947 - Present Chevrolet & GMC Truck Message Board Network

78SilveradoSWB · 11-20-2002, 03:03 PM

Anyone have any pictures showing the inner workings of their 81-87 truck door with power windows and door locks? Want't to make sure where everything goes when add them. Thanks!

*Zilverado* · 11-20-2002, 04:55 PM

Ouch - too bad this wasn't asked a week ago. I was actually working to try and replace a window motor. Had my door panel off and all the "guts" out. It's all back together now

.

Anyway, I don't know how much different it is from the manual window models. The motor is mounted to the regulator assembly (I think that's what I've heard it called) inside the door. The assembly is removed by removing the 4 fasteners (2 bolts and 2 nuts on studs) located behind the inner door liner - toward the hinge end of the door. The assembly then just slides toward the back as the arms and rollers come out of the tracks. The whole works comes out of the large square hole on the top right of the door.

I don't know if this helps at all, but it's the best I can do for now. Sorry no pics (just a thousand words

).

Izzy · 11-20-2002, 05:32 PM

I'll be cleaning/greasing my window tracks in a couple weeks. If you can wait I'll get plenty of pics for yah.

Slonaker · 11-20-2002, 05:38 PM

Manual locks (might be helpful):

http://www.cybrrpartspro.com/Chilton...77CH10_16.HTML

Power windows:

http://www.cybrrpartspro.com/Chilton...77CH10_21.HTML

Slonaker

78SilveradoSWB · 11-21-2002, 11:59 PM

Quote:

Originally posted by fiveeightchevy
I'll be cleaning/greasing my window tracks in a couple weeks. If you can wait I'll get plenty of pics for yah.

Thanks, would appreciate it.

11-20-2002, 03:03 PM	#1
78SilveradoSWB Senior Member Join Date: Apr 2002 Location: Beaverton, OR Posts: 1,615	Inside Door Pictures Anyone have any pictures showing the inner workings of their 81-87 truck door with power windows and door locks? Want't to make sure where everything goes when add them. Thanks!

11-20-2002, 04:55 PM	#2
Zilverado Account Suspended Join Date: Nov 2002 Location: Winnipeg, Manitoba, Canada Posts: 798	Ouch - too bad this wasn't asked a week ago. I was actually working to try and replace a window motor. Had my door panel off and all the "guts" out. It's all back together now . Anyway, I don't know how much different it is from the manual window models. The motor is mounted to the regulator assembly (I think that's what I've heard it called) inside the door. The assembly is removed by removing the 4 fasteners (2 bolts and 2 nuts on studs) located behind the inner door liner - toward the hinge end of the door. The assembly then just slides toward the back as the arms and rollers come out of the tracks. The whole works comes out of the large square hole on the top right of the door. I don't know if this helps at all, but it's the best I can do for now. Sorry no pics (just a thousand words).

11-20-2002, 05:38 PM	#4
Slonaker Insert Witty Text Here Join Date: Oct 2002 Location: San Antonio, TX Posts: 3,415	Manual locks (might be helpful): http://www.cybrrpartspro.com/Chilton...77CH10_16.HTML Power windows: http://www.cybrrpartspro.com/Chilton...77CH10_21.HTML Slonaker __________________ '86 Chevy C10 (Sold 04/19/13 ) Stock '01 Silverado

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

11-20-2002, 05:32 PM	#3
Izzy Trucker. Join Date: Nov 2002 Location: Fort Worth, TX Posts: 1,364	I'll be cleaning/greasing my window tracks in a couple weeks. If you can wait I'll get plenty of pics for yah.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.