Steering Column Options for a 49 w/camaro subframe? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

5150 · 11-25-2008, 09:00 PM

Hey guys,

I don't usually come over here, but I had one of my good friends that asked me a question. His dad is working on a 49 five window and he wants to get his dad a nice tilt steering column. It has the camaro sub frame so I don't think the old van tilt that us 67-72 guys are using will work. Correct me if I'm wrong.

What are his options?? I don't think he minds spending some money for something nice, but if there is another cheaper option I'd like to know.

thanks,

Bryan

Scottshotrods · 11-30-2008, 04:09 PM

we stock Ididit steering columns.They start at $299.00 please contac us
if we can help.Pm us or
call (805)485-0382
Justin
Scotts Hotrods

jkaylor68gmc · 11-30-2008, 04:22 PM

yep, ididit 32-inches is the length you need.

magsnubby · 11-30-2008, 08:58 PM

There's tons of used stuff out there that would work (just fab up a new column to dash bracket) but as stated above, one of these would be his best bet:

http://www.flamingriver.com/index.cf...=cat/cat88.htm

http://www.ididitinc.com/universal_s...l_columns.html

11-25-2008, 09:00 PM	#1
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Steering Column Options for a 49 w/camaro subframe? Hey guys, I don't usually come over here, but I had one of my good friends that asked me a question. His dad is working on a 49 five window and he wants to get his dad a nice tilt steering column. It has the camaro sub frame so I don't think the old van tilt that us 67-72 guys are using will work. Correct me if I'm wrong. What are his options?? I don't think he minds spending some money for something nice, but if there is another cheaper option I'd like to know. thanks, Bryan __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

11-30-2008, 04:09 PM	#2
Scottshotrods Registered User Join Date: Oct 2008 Location: oxnard ca Posts: 2,201	Re: Steering Column Options for a 49 w/camaro subframe? we stock Ididit steering columns.They start at $299.00 please contac us if we can help.Pm us or call (805)485-0382 Justin Scotts Hotrods

11-30-2008, 04:22 PM	#3
jkaylor68gmc Senior Member Join Date: Dec 2005 Location: TN Posts: 2,448	Re: Steering Column Options for a 49 w/camaro subframe? yep, ididit 32-inches is the length you need. __________________ 1947 International KB-1 1957 Chevy Bel-Air riding low 1962 swb fleetside 2002 Chevrolet Silverado 7-inch lift on 35 Daily driver 2016 Chevy Tahoe Better halves ride

11-30-2008, 08:58 PM	#4
magsnubby Registered User Join Date: Jan 2007 Location: fresno,ca Posts: 448	Re: Steering Column Options for a 49 w/camaro subframe? There's tons of used stuff out there that would work (just fab up a new column to dash bracket) but as stated above, one of these would be his best bet: http://www.flamingriver.com/index.cf...=cat/cat88.htm http://www.ididitinc.com/universal_s...l_columns.html

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.