Calling all turbo guys

[jrsmith_2010]

ok, my truck is almost done and ive been wanting to add more power. my and my dad are going to do a cam kit in the near future, but i think it can handle more. ive seen a few guys on here that have a twin turbo setup. so what im askin is what all do i need to do this. ive seen the headers on ebay that run off the exaust, thats what i need right? can any turbo work like one from a newer truck? do i need to make a metal box to go around the carb? any help?

[jrsmith_2010]

heres the headers i found

http://cgi.ebay.com/ebaymotors/Small...Q5fAccessories

[C-10volvo]

Research research research!!!!
There is a lot more to it than just buying exhaust manifolds, turbos and tubing. A lot of times, it will require a full rebuild of the motor with strong forged short block with lower compression pistons.

To answer your question: yes, the carb will need to be enclosed.

[Captkaos]

like c10volvo said, this is more than just slapping a set of manifolds and bolting on the truck with some turbos.
Ideally you want to match the turbo to the power level/displacement/etc.

How was the engine built? will it handle the added stress? If it is stock, don't expect to boost it more than 5lbs, which would be a waste in my opinion, unless you just want to play around with experience.
A carb has to be modified to run a blowthrough setup, and you HAVE to have an blower hat/enclosure.

[trixter99]

Save your money and put it to better use. Twin turbos are way beyond your needs.

[jrsmith_2010]

what would be more ideal, turbos or supercharger? thanks for all the opinions

[trixter99]

I f you are just wanting something cool and practical buy a supercharger.

[jrsmith_2010]

im lookin just for something that will sperate my truck from all the other square bodys in my town, something to outrun them if needed

[C-10volvo]

If speed is what you're after, do the cheap things first. We need to know what you have in your truck at the moment to give you better suggestions.

[jrsmith_2010]

its a stock GM crate motor with 194 heads

[BigAl]

Can you actually have a turbo with a carb? I can't concieve of it...

Anyways, sounds like supercharged is a better option...

[jrsmith_2010]

well me and my dad where talkin about what we can add to it before the forced injection. like a cam kit, some 2.02 heads, but what else can i add for added horses?

[Thumpin455]

The carb doesnt absolutely need to be enclosed, but it does need to be modified. With the enclosure you can run a relatively stock carb provided you have a boost referencing regulator and enough fuel pump to push the fuel into a pressurized box. The drawback to the enclosure is getting to the carb to do some tuning, you will have more work involved with any changes you make to the carb.

With the hat only no enclosure, tuning is easier but the carb needs to be modified so pressurized air doesnt go places it shouldnt, as well as so that it flows enough fuel to keep the engine happy.

Centrifugal superchargers also can use a blow through carb with either method of getting air into the carb. The roots style blower is the one with the carbs mounted above the blower, and they fit pretty well under the hood of a square. I would like to drop one on the 454 in the 76 for some fun and puling power.

The engine will need to be able to take higher cylinder pressure, not so much higher rpm. Usually the weak link is the head gasket, but go lean just once under load and you will have pistons that look like Laquechia's hoop earrings. When tuning and setting up a turbo system, you cant just slap stuff together, you have to know or have someone who does know what they are doing help you, without knowledge you will just burn money and break parts. Study first, build second, make power last.

Not only does the engine need some upgrades, the fuel system needs them as well. Your stock mechanical pump isnt going to get the job done. You will spend around $1000 for the basic fuel system but you can easily spend a bunch more. More air means more fuel, its as simple as that.

Here are some blow through systems that dont use the enclosure. Its more often you see this setup than the box due to the ease of changes to the tune.

[heavychevy79]

Originally Posted by Thumpin455

but go lean just once under load and you will have pistons that look like Laquechia's hoop earrings.

LOL.

Car Craft blew up a stock sbc with a belt drive turbo in a recent article.
The pistons went first.

[jdurant]

Originally Posted by heavychevy79

LOL.

Car Craft blew up a stock sbc with a belt drive turbo in a recent article.
The pistons went first.

I believe that would be a supercharger. I see alot of people call a centrifugal superchargers a turbo--just trying to stop the spread of misinformation. No offense.

[LMDGUY]

turbos are alot of work and expennce upfront but you do get sum good power.. search online for a forum call "turbo mustangs" lot of good tech and info.. not just mustang info also

[Captkaos]

This is a link to all 8 of the CHP articles they did on building up a crate motor:

http://forum.73-87chevytrucks.com/sm...p?topic=8639.0

[jrsmith_2010]

ive been lookin into the 671 supercharger, ive seen all kinds of different prices, what is the ballpark for one?

[gchemist]

How about a carb with twin turbos!!
http://www.turbocustoms.com/index.htm

[jrsmith_2010]

been doin some research, and a 671 supercharger is about 2500, so i found a turbo kit one ebay, for a camaro.
http://cgi.ebay.com/ebaymotors/CHEVY...Q5fAccessories

http://cgi.ebay.com/ebaymotors/Chevy...Q5fAccessories

http://cgi.ebay.com/ebaymotors/CHEVY...Q5fAccessories

http://cgi.ebay.com/ebaymotors/CHEVY...Q5fAccessories



but how would this be hooked up?

[N2TRUX]

Originally Posted by jrsmith_2010

been doin some research, and a 671 supercharger is about 2500, so i found a turbo kit one ebay, ......
but how would this be hooked up?

Just follow the simple to read step by step instructions.....

[mickman77]

was on the vortech site researching a supercharger for my '06 K 2500 HD and it looked simple enough with great reviews about clear and precise instructions. might be worth a peek.

[jrsmith_2010]

so even tho the turbo kits are for a camaro, its all compatible for a 350 for my truck right?

[N2TRUX]

It's compatible in the sense that it for a small block Chevy motor. Beyond that, no it's not going to fit. No one makes a "kit" for your truck. Your going to have to custom build one from scratch.

Speaking of scratch, have you considered what this will cost?

If you really want to make your truck unique, stay focused on making it nice. I'll bet that most of the trucks running around are in need of cosmetic upgrades. If you focus on having a good running truck that is really detailed it will stand out from the crowd.

[jdurant]

Yeah dude, bad idea. To make a turbo setup worthwhile on your motor would really cost big bucks and you would basically have to start over from square one to do it right. Money would be much better spent elswhere. A Blower, nitrous, or machine work+more aggressive heads/cam/compression would be a better options, but an LSx is hard to beat bang for your buck. Now if your dead set on forced induction: get an LC2-with a few performance parts you can make 500hp and get 20mpg but you would have to tell people there is a Buick 6 cylinder in there. That would be different.