Christmas Sale, everything must go! Lots of truck Parts

[SanitysBane]

Hey guys,
I have decided that college is not the time to build a truck so I am selling everything that I have collected to build the truck.

Pictures can be seen here- http://s463.photobucket.com/albums/qq359/BoJangles7187/

I prefer to not split the items up but I am not opposed.

84 2WD Short Bed Frame- sandblasted, and painted gloss back, only the frame rails are painted but the front crossmember, rear cab mount brace, draglink, idler arm mounting arm, stock shackles are all in primer but not paint and are not attachted, the frame is not rolling as nothing is bolted together- $50

84 2wd AC Auto cab and doors- very minor rust on the cab corners and slight dent on passinger side rocker, doors have no rust and have power windows and locks, have clean title- $100

74 2wd AC Auto cob- rusted cab corners, and surface rust on cab, have title- $50

84 short bed- no rust, dents in bed floor- $50

84 passinger side fender- no rust or dents- $20

83 hood- minor dent and no rust- $20

82 hood- rust bubbles on front edge- $20

83 driver side fender- no rust or dents- $20

83 core support- $40

Inner tie rods for 83 1/2ton 2wd- new in box - Sold

Outter tie rods for 83 1/2ton 2wd- new in box- Sold

Idler Arm for 83 1/2ton 2wd-new in box- Sold

Front Shocks- 83 1/2ton 2wd- new in box- Sold

Tie Rod Adjusting Sleeve- New in box- Sold

Gasket for back glass for 83- new in box- relisted at $20

Bumpstobs- 83 1/2ton 2wd- new in box- both upper and lowers for each side- Sold

83 1/2ton 2wd A-Arms, painted black with poly bushings installed-all four Sold

83 1/2ton 2wd upper ball joints- new in box- Sold

83 1/2ton 2wd lower ball joints- intall on the a-arm but never on the road- Sold

1 1/4 sway bar from a 77 3/4ton 2wd- Sold

Sway bar from 74 3/4ton 2wd- unsure of size- $20

Dana 60 rear end- 4.11 gear out of 74 3/4ton 2wd- $400

Complete interior plastic out of 83, was red but p.o. painted it black, minus door panels- $40

Headers for BBC 1/2ton 2wd- $50

Gauge Clusters- $20

Steering Colums; 74-tilt, 3 speed auto- $20; 83-tilt, 4 speed auto- $20; 84-tilt, 3 speed auto, cruise- $20

Gas Tanks- 2 -16 gallon tanks, no rust- $20 each, 1- 20 gallon tank, no rust- $20

Set of 15X8 Rally wheels with center caps and trim rings- $50

Set of 15X8 aluminum wheels- $50

Set of 15X8 aluminum wheels from an 88 van- $240 with 275/60 R15 with some tread left or $200 for wheels only, picture is of the only one with curb damage

Set of 15X8 aluminum wheels with ford and GM bolt pattern- $50

Have several other parts for sale with 3 complete trucks for part out; 84 1/2ton 2wd short bed, 83 1/2ton 2wd long bed, 74 3/4ton 2wd long bed.

New Items!
Driver Front Rubber Brake line- 83 1/2ton 2wd- new in box- $10

Passinger inner Front Fender- for 82 c10 2wd- $50

Tailgates- 83 with metal trim with the dent in the trim- $25 (sale pending), 82 without trim- $20

New Motor mounts for 84 C10- $20

Factory Cab Corner Speakers- $20 (sale pending)

12 bolt truck rearend with posi, unsure of gear set or condition- $100

10 bolt out of an 88 3/4ton van with a 3.42 gear and posi in great working order- $200

350 Chevrolet short block, bored .030 over and looks to be in good shape- $150

Bench seats out of 84 and 82 C10 in great shape- $20

Grill trim from a 74 GMC (headlight bezels, crome strips above and below grill) in good condition- $20

[Field and Son]

I see you have a 74 to part out. I am looking for door mirrors as well as engine brackets and under the hood air parts. Let me know what you may have. Also possibly the box and tailgate for truck if rust free and real nice??

Edited to add that I may have interest in the complete parts truck depending on condition and price...

[blu87]

I'm interested in the new front 1/2 t springs, I would appreciate some pics, who is the manuf, and shippingcost to 32533.
Thanks

[PhilaTruck]

Originally Posted by SanitysBane

Inner tie rods for 83 1/2ton 2wd- new in box - $15 for both

Outter tie rods for 83 1/2ton 2wd- new in box- $15 for both

Idler Arm for 83 1/2ton 2wd-new in box- $15

Front Springs- 83 1/2ton 2wd with 350 and Air- new in box- $50

Front Shocks- 83 1/2ton 2wd- new in box- $20

Tie Rod Adjusting Sleeve- New in box- $10 for both

Gasket for back glass for 83- new in box- $20

Bumpstobs- 83 1/2ton 2wd- new in box- both upper and lowers for each side- $20

83 1/2ton 2wd A-Arms, painted black with poly bushings installed-all four for $50

83 1/2ton 2wd upper ball joints- new in box- $20

83 1/2ton 2wd lower ball joints- intall on the a-arm but never on the road- $20

1 1/4 sway bar from a 77 3/4ton 2wd- $20

I'm interested in the above (1/2 T springs after blu87). And now for the big question, how much to ship to 19130?

Thanks- Todd

[JQE80]

Can I be next in line for both sets of ball joints?

[trenchwarfare]

Any details or photos of the headers?

[rod86]

would be interested in the bumpstops..
how much to ship to australia?

[454HO]

Originally Posted by SanitysBane

Hey guys,
I have decided that college is not the time to build a truck so I am selling everything that I have collected to build the truck.


CalTracs for 83 1/2ton with flipped axle- brand new in box- $100

Consider these SOLD. I may also be interested in some other parts. You say you are in Beaumont? I may need to come take a look at what you've got.

[4everGMtrucks]

i really need a good short bed, plus i would probably pick up the frame while i'm down there. (among other stuff)... could you e-mail the condition of bed or beds you might have along with a phone number, or i'll e-mail mine to you privately. these would make great christmas gifts to myself. e-mail is... tncgreiner@hotmail.com

[SanitysBane]

Pictures are up on my photobucket acount.

http://s463.photobucket.com/albums/qq359/BoJangles7187/

Field and Son- the 74 is in 2 peices as the cab and front end is pulled off the frame and sitting on jackstands right. I didn't know which set of door mirrors you wanted, but I have three different kinds, and 3 of the "dumbo ears". Your first in line for any set of the mirrors and I'll say $20 for a set, regardless of style. The box is in allright shape on the passinger side but its a long box, and the tailgate is MIA. I have attachted pictures of all the beds and tailgates that I have, your first in line for these as well.


Blu87- Pictures are included, and the manufacture is TRW Automotive, I don't remember which parts chain I bought them from, just remember it wasn't Nappa, Autozone, or O'Reillys. Shipping cost with Fedex is a little under $20.

PhilaTruck- PM Sent

JQE80- Yes sir

Trenchwarfare- These are the summit brand headers that were bought for my 83 1/2ton 2wd auto truck. They have around 10-15 thousand miles on them.

Rod86- You are next in line for the bumpstops, unsure of pricing.

454HO- E-mail sent.

4everGMTrucks- You are next in line for a truck bed and PM Sent.

[Field and Son]

How do I get to your photobucket photos??

[blu87]

David
I'll take the springs. Do you take paypal, MO, pers check or?PM me with payment details.

[SanitysBane]

Just added the link, if it doesn't work, let me know.

[SanitysBane]

PM sent to Blu87

[Field and Son]

I will take the set of mirrors on the gold cab as well as the big white set on the blue cab providing they all have no problems with good mirrors. Check them out and let me know a total with shipping. Also do you have a set of air brackets and a compressor for a 350 engine?? Thanks. You can PM me the details and payment info...

[4everGMtrucks]

if the rest of the gold bed looks as good as the pic you posted and it is available to me i'll pay QUIK. also the P.M. you sent wont come through, if you could e-mail me, that might work.

[SanitysBane]

Field and Son- PM Sent

4everGMtrucks- Email sent

[Motor City GMC]

Do you have bucket seats & console?

[SanitysBane]

Motor City GMC- No I do not but I do have three bench seats in really good condition, $30 a seat.

[JQE80]

shoot me a PM if Philatruck doesn't take those ball joints. I am very interested.

Jarrid

[trenchwarfare]

I'll be interested in the headers after New Year's if you wouldn't mind.

[trenchwarfare]

Actually I'll pass. I think I'll get a pair that come along with a new exhaust system. Thanks anyways.

[wild wille]

is frame in rollable condition with some tires and wheels?

[SanitysBane]

Trenchwarfare- I do have an exhaust for a long wheel base truck with two flowmaster, I'll sell it with the headers for an extra $20.

WildWille- You are 2nd in line for the frame

Details and new parts added!

[trenchwarfare]

Originally Posted by SanitysBane

Trenchwarfare- I do have an exhaust for a long wheel base truck with two flowmaster, I'll sell it with the headers for an extra $20.

WildWille- You are 2nd in line for the frame

Details and new parts added!

It's not dual is it, as that's what i'm looking for.