Clutch Pedal & Fork - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Knothead · 01-07-2009, 07:41 PM

Does anybody know where I can locate the correct pedal for a '56? The splines on the one I have doesn't mesh with the cross shaft at the correct angle. Also which release fork will work with the original setup? I found one on evil bay for $70.00!!! , lists a bunch of different applications for it, Want to make sure it will work.

Caveman49 · 01-08-2009, 12:08 AM

Are you just needing the pedal arm, or what? I have a 56 parts truck.

Knothead · 01-08-2009, 02:10 PM

I just need the actual pedal your foot comes in contact with.Also the release fork that clips in bellhousing.

Caveman49 · 01-09-2009, 08:23 PM

I'll check the 56 I have in the back, see what's there. I'll get back with you tomorrow.

OrrieG · 01-10-2009, 04:45 PM

I still have the stock clutch linkage setup for my 59 and will not be using it. Didn't know it was worth $70, LOL. If Caveman can't help you pm me.

Knothead · 01-10-2009, 06:07 PM

Thanks Guys ,I'll check back later.

Knothead · 01-28-2009, 04:02 PM

I did find a clutch fork that looks like the correct part, GM # 839240. Description says for earlier model car?

renegade6 · 01-29-2009, 12:55 PM

I may have an extra brake pedal I could make you a really good deal on. If I don't have one now, I will shortly when I convert to a firewall M/C.

OrrieG · 01-29-2009, 01:09 PM

Quote:

Originally Posted by Knothead

I did find a clutch fork that looks like the correct part, GM # 839240. Description says for earlier model car?

I did a search online and at stovebolt and found the same thing. Difference is probably the bellhousing. There was some discussion about pivot points being different but I could not find a specific place that told which would interchange. You might go to www.stovebolt.com and ask the question over there.

01-07-2009, 07:41 PM	#1
Knothead Registered User Join Date: Mar 2007 Location: south carolina Posts: 251	Clutch Pedal & Fork Does anybody know where I can locate the correct pedal for a '56? The splines on the one I have doesn't mesh with the cross shaft at the correct angle. Also which release fork will work with the original setup? I found one on evil bay for $70.00!!! , lists a bunch of different applications for it, Want to make sure it will work. Last edited by Knothead; 01-07-2009 at 07:52 PM. Reason: grammer

01-08-2009, 12:08 AM	#2
Caveman49 Registered User Join Date: Jun 2007 Location: Alabama Posts: 78	Re: Clutch Pedal & Fork Are you just needing the pedal arm, or what? I have a 56 parts truck.

01-08-2009, 02:10 PM	#3
Knothead Registered User Join Date: Mar 2007 Location: south carolina Posts: 251	Re: Clutch Pedal & Fork I just need the actual pedal your foot comes in contact with.Also the release fork that clips in bellhousing.

01-09-2009, 08:23 PM	#4
Caveman49 Registered User Join Date: Jun 2007 Location: Alabama Posts: 78	Re: Clutch Pedal & Fork I'll check the 56 I have in the back, see what's there. I'll get back with you tomorrow.

01-10-2009, 04:45 PM	#5
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Re: Clutch Pedal & Fork I still have the stock clutch linkage setup for my 59 and will not be using it. Didn't know it was worth $70, LOL. If Caveman can't help you pm me. __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project

01-10-2009, 06:07 PM	#6
Knothead Registered User Join Date: Mar 2007 Location: south carolina Posts: 251	Re: Clutch Pedal & Fork Thanks Guys ,I'll check back later.

01-28-2009, 04:02 PM	#7
Knothead Registered User Join Date: Mar 2007 Location: south carolina Posts: 251	Re: Clutch Pedal & Fork I did find a clutch fork that looks like the correct part, GM # 839240. Description says for earlier model car?

01-29-2009, 12:55 PM	#8
renegade6 Registered User Join Date: Nov 2008 Location: Texarkana, TX Posts: 443	Re: Clutch Pedal & Fork I may have an extra brake pedal I could make you a really good deal on. If I don't have one now, I will shortly when I convert to a firewall M/C. __________________ Brandon 63 Biscayne https://www.pro-touring.com/threads/90718-63-Biscayne 57 Chevy Truck (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=321380 72 K20 Long bed stepside (wife's) 72 K20 Long bed 396 (flip or keep...?) The latest build: http://67-72chevytrucks.com/vboard/s...76#post8438476

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.