1958/59 Tire Change Hardware Kit - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Texasdeere · 01-08-2009, 05:16 PM

The tire change kit is missing from my truck. Was the kit mounted under the seat? Does anyone have any pictures of the tools and jack?

Thanks for your help.

dwcsr · 01-08-2009, 07:38 PM

it was behind the seat in the cab corner area on the left side of the truck.
The jack was a screw type with a spinner handle. The lug wrench looked pretty much like the 70's handle

Texasdeere · 01-08-2009, 08:22 PM

Thanks, I will take a look back there.

Texasdeere · 01-09-2009, 09:47 PM

Yup, It is gone. I saw the mount pad and spring back there.

OrrieG · 01-10-2009, 04:42 PM

Quote:

Originally Posted by TexasC10

Yup, It is gone. I saw the mount pad and spring back there.

Usually all that is left on these, I got my truck in 1976 and it was gone then...

Texasdeere · 01-12-2009, 06:58 PM

I noticed it is a little tricky to perform an effective search on ebay for spare tire jacks for older trucks, and there doesn't seem to be much out there.

I will have to keep on tryin.

OrrieG · 01-13-2009, 01:40 AM

A couple of thoughts. In the classifieds there was a guy in eastern Idaho that had a bunch of trucks he was parting out, he might have one laying around. Jim Carter has a used parts section you might check, might even make reproductions.

01-08-2009, 05:16 PM	#1
Texasdeere Registered User Join Date: Sep 2006 Location: League City, Texas Posts: 732	1958/59 Tire Change Hardware Kit The tire change kit is missing from my truck. Was the kit mounted under the seat? Does anyone have any pictures of the tools and jack? Thanks for your help.

01-08-2009, 07:38 PM	#2
dwcsr Hollister Road Co. Join Date: Apr 2005 Location: Houston Posts: 6,131	Re: 1958/59 Tire Change Hardware Kit it was behind the seat in the cab corner area on the left side of the truck. The jack was a screw type with a spinner handle. The lug wrench looked pretty much like the 70's handle Last edited by dwcsr; 01-08-2009 at 07:40 PM.

01-08-2009, 08:22 PM	#3
Texasdeere Registered User Join Date: Sep 2006 Location: League City, Texas Posts: 732	Re: 1958/59 Tire Change Hardware Kit Thanks, I will take a look back there.

01-09-2009, 09:47 PM	#4
Texasdeere Registered User Join Date: Sep 2006 Location: League City, Texas Posts: 732	Re: 1958/59 Tire Change Hardware Kit Yup, It is gone. I saw the mount pad and spring back there.

01-12-2009, 06:58 PM	#6
Texasdeere Registered User Join Date: Sep 2006 Location: League City, Texas Posts: 732	Re: 1958/59 Tire Change Hardware Kit I noticed it is a little tricky to perform an effective search on ebay for spare tire jacks for older trucks, and there doesn't seem to be much out there. I will have to keep on tryin.

01-13-2009, 01:40 AM	#7
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Re: 1958/59 Tire Change Hardware Kit A couple of thoughts. In the classifieds there was a guy in eastern Idaho that had a bunch of trucks he was parting out, he might have one laying around. Jim Carter has a used parts section you might check, might even make reproductions. __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.