Removing in Cab Gas Tank Supports - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DaddyMack · 02-07-2009, 09:57 PM

Are they pressed in or part of the cab itself? 62 pickup

Thanks for any help!

502tripower · 02-08-2009, 11:59 AM

Mack, just drill out the spotwelds and they will come right out.

DaddyMack · 02-08-2009, 01:32 PM

Hmm okay I will take another look, but I didnt see them. Thanks!

joe231 · 02-08-2009, 02:16 PM

you may need to use a flap disk or wire wheel to uncover the spots.
in the '64-'56'-66 they are part of the rear cab mounts and seem to add some rigidity to the back wall of the cab....
My thinking on my is to just cut off the front portion that sticks out for the tank to sit on.

not sure about the '60-'63 cabs

Alan's Classic · 02-08-2009, 07:36 PM

I'm confussed. Is this what you are talking about.

DaddyMack · 02-08-2009, 07:38 PM

Quote:

Originally Posted by Alan's Classic

I'm confussed. Is this what you are talking about.

Was. lol

DaddyMack · 02-08-2009, 07:38 PM

here are the pics for anyone interested.

13 weld spots per bracket... if you add the four bolts holding it down..lol.. this thing wasn't going anywhere!... lmao.. talk about overkill.

Worth taking out IMO .. look at the rust lurking behind it!

Only one oopsy ... 25 partial holes and 1 oopsy..lol

Alan's Classic · 02-08-2009, 08:11 PM

Are you just going to use a nut and washer on your cab mount bolt? Or is there other plans?

protrash64 · 02-08-2009, 09:09 PM

You just removed your sub-box mounts........

......

!

ol Curt · 02-08-2009, 09:42 PM

Quote:

Originally Posted by protrash64

You just removed your sub-box mounts........

......

!

TimE · 02-08-2009, 10:13 PM

Quote:

Originally Posted by Alan's Classic

Are you just going to use a nut and washer on your cab mount bolt? Or is there other plans?

I'm curious about this too...

502tripower · 02-09-2009, 11:16 AM

Mack, Looks good. I did the exact same thing in my cab. Including drilling through the back of the cab in one place...

and they looked about like yours comming out....

I just used a bolt and washer.

joe231 · 02-09-2009, 11:21 AM

Quote:

Originally Posted by 502tripower

Mack, Looks good. I did the exact same thing in my cab. Including drilling through the back of the cab...

and they lloked about like yours comming out....

Hey, what did you use for your cab mounts?

502tripower · 02-09-2009, 11:25 AM

Damn your fast Joe.....

Is there smoke comming off that key board....

DaddyMack · 02-09-2009, 06:41 PM

Quote:

Originally Posted by ol Curt

Quote:

Originally Posted by TimE

I'm curious about this too...

Quote:

Originally Posted by Alan's Classic

Are you just going to use a nut and washer on your cab mount bolt? Or is there other plans?

Quote:

Originally Posted by 502tripower

Mack, Looks good. I did the exact same thing in my cab. Including drilling through the back of the cab in one place...

and they looked about like yours comming out....

I just used a bolt and washer.

Hehe! Nothing that cant be covered

I plan to just take a quarter inch flat plate to lay across from one hole to the next (on each side)... washer, lock washer and nut or perhaps nylocs.. either way...

Quote:

Originally Posted by protrash64

You just removed your sub-box mounts........

......

!

LMAO!!! I discussed this exact thing with my kid..lol... BUT the rust I could see, plus, I am not sure exactly what seats, etc. are going in... Thinking.. 98 silverado... I wanted the room

BUT here is a question.... or thoughts....sand surface rust? then just spray paint using paint with a rust inhibitor? then coat entire bottom portion of cab with rhino liner before putting in sound deadener? or just use the rhino in the footwells? or ???? trying to figure out best way to treat it...most if it will be covered with carpeting...

protrash64 · 02-09-2009, 07:04 PM

I would do all of that. Sand, wirebrush, whatever you prefer. Im not sure what rhino liner can be sprayed on, but maybe self-etching primer. Rhino the whole floor .......fill in your threaded holes first.

Good to see you back on here with some updates.

joe231 · 02-09-2009, 07:16 PM

Quote:

Originally Posted by 502tripower

Damn your fast Joe.....

Is there smoke comming off that key board....

Quote:

Originally Posted by ol Curt

If you're going to be the Sheriff, you have to be quick on the draw!!

Quote:

Originally Posted by 4dranch

What can I say?

Quote:

Originally Posted by DaddyMack

Hehe! Nothing that cant be covered

I plan to just take a quarter inch flat plate to lay across from one hole to the next (on each side)... washer, lock washer and nut or perhaps nylocs.. either way...

LMAO!!! I discussed this exact thing with my kid..lol... BUT the rust I could see, plus, I am not sure exactly what seats, etc. are going in... Thinking.. 98 silverado... I wanted the room

BUT here is a question.... or thoughts....sand surface rust? then just spray paint using paint with a rust inhibitor? then coat entire bottom portion of cab with rhino liner before putting in sound deadener? or just use the rhino in the footwells? or ???? trying to figure out best way to treat it...most if it will be covered with carpeting...

Chief turned me on to this spray it yourself 2 part bedliner, U-POL Raptor, for around $120 you get a gallon, hardener, and even the gun. Have read good things about it on a jeep forum. you can't spray it on bare metal though, they recommend a good etching primer on any bare metal. I think I'm gonna use it on the underside of the cab along with inside on the floor.
here is a link to one site that sells it
http://www.tptools.com/p/2600,233_U-...Liner-Kit.html

ol Curt · 02-09-2009, 12:48 PM

If you're going to be the Sheriff, you have to be quick on the draw!!

4dranch · 02-09-2009, 01:00 PM

joe231 · 02-11-2009, 08:24 PM

02-07-2009, 09:57 PM	#1
DaddyMack Wide Eyed User Join Date: Mar 2008 Location: Las Vegas, Nevada Posts: 261	Removing in Cab Gas Tank Supports Are they pressed in or part of the cab itself? 62 pickup Thanks for any help! __________________ 1962 Chevy P/U SB Fleetside 350/350 2.5/5 static drop My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=294723 Final (as final can be ) Pics: http://67-72chevytrucks.com/vboard/s...d.php?t=393441

02-08-2009, 11:59 AM	#2
502tripower Registered User Join Date: Jan 2008 Location: Satsop, WA Posts: 606	Re: Removing in Cab Gas Tank Supports Mack, just drill out the spotwelds and they will come right out. __________________ 1963' Chev Custom Cab 502, 67' 435hp 3X2 intake, 9" 4:30 Posi 1961 Impala SS 348/350 4-speed 3:70 Posi 1961 Bel-Air Bubble Top 283 Turboglide soon to have a 348 3X2 4-speed 1950 17' Fairliner twin cockpit barrel stern 312 Y block 1X1 intake Borg Warner 1:1 gear 1957 Fleetform 14' twin cockpit barrel stern 1969 BP-125 Merc 1949 Transitier 3-wheel forklift Crosley 4-Banger 98' FXD 2002 2500HD

02-08-2009, 01:32 PM	#3
DaddyMack Wide Eyed User Join Date: Mar 2008 Location: Las Vegas, Nevada Posts: 261	Re: Removing in Cab Gas Tank Supports Hmm okay I will take another look, but I didnt see them. Thanks! __________________ 1962 Chevy P/U SB Fleetside 350/350 2.5/5 static drop My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=294723 Final (as final can be ) Pics: http://67-72chevytrucks.com/vboard/s...d.php?t=393441

02-08-2009, 02:16 PM	#4
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Removing in Cab Gas Tank Supports you may need to use a flap disk or wire wheel to uncover the spots. in the '64-'56'-66 they are part of the rear cab mounts and seem to add some rigidity to the back wall of the cab.... My thinking on my is to just cut off the front portion that sticks out for the tank to sit on. not sure about the '60-'63 cabs __________________ *CHEVY ONLY*

02-08-2009, 07:36 PM	#5
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: Removing in Cab Gas Tank Supports I'm confussed. Is this what you are talking about. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

02-08-2009, 07:38 PM	#7
DaddyMack Wide Eyed User Join Date: Mar 2008 Location: Las Vegas, Nevada Posts: 261	Re: Removing in Cab Gas Tank Supports here are the pics for anyone interested. 13 weld spots per bracket... if you add the four bolts holding it down..lol.. this thing wasn't going anywhere!... lmao.. talk about overkill. Worth taking out IMO .. look at the rust lurking behind it! Only one oopsy ... 25 partial holes and 1 oopsy..lol __________________ 1962 Chevy P/U SB Fleetside 350/350 2.5/5 static drop My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=294723 Final (as final can be ) Pics: http://67-72chevytrucks.com/vboard/s...d.php?t=393441 Last edited by DaddyMack; 02-08-2009 at 07:41 PM.

02-08-2009, 08:11 PM	#8
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: Removing in Cab Gas Tank Supports Are you just going to use a nut and washer on your cab mount bolt? Or is there other plans? __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

02-08-2009, 09:09 PM	#9
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,520	Re: Removing in Cab Gas Tank Supports You just removed your sub-box mounts..............! __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

02-09-2009, 11:16 AM	#12
502tripower Registered User Join Date: Jan 2008 Location: Satsop, WA Posts: 606	Re: Removing in Cab Gas Tank Supports Mack, Looks good. I did the exact same thing in my cab. Including drilling through the back of the cab in one place... and they looked about like yours comming out.... I just used a bolt and washer. __________________ 1963' Chev Custom Cab 502, 67' 435hp 3X2 intake, 9" 4:30 Posi 1961 Impala SS 348/350 4-speed 3:70 Posi 1961 Bel-Air Bubble Top 283 Turboglide soon to have a 348 3X2 4-speed 1950 17' Fairliner twin cockpit barrel stern 312 Y block 1X1 intake Borg Warner 1:1 gear 1957 Fleetform 14' twin cockpit barrel stern 1969 BP-125 Merc 1949 Transitier 3-wheel forklift Crosley 4-Banger 98' FXD 2002 2500HD Last edited by 502tripower; 02-09-2009 at 11:22 AM.

02-09-2009, 11:25 AM	#14
502tripower Registered User Join Date: Jan 2008 Location: Satsop, WA Posts: 606	Re: Removing in Cab Gas Tank Supports Damn your fast Joe..... Is there smoke comming off that key board.... __________________ 1963' Chev Custom Cab 502, 67' 435hp 3X2 intake, 9" 4:30 Posi 1961 Impala SS 348/350 4-speed 3:70 Posi 1961 Bel-Air Bubble Top 283 Turboglide soon to have a 348 3X2 4-speed 1950 17' Fairliner twin cockpit barrel stern 312 Y block 1X1 intake Borg Warner 1:1 gear 1957 Fleetform 14' twin cockpit barrel stern 1969 BP-125 Merc 1949 Transitier 3-wheel forklift Crosley 4-Banger 98' FXD 2002 2500HD

02-09-2009, 07:04 PM	#16
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,520	Re: Removing in Cab Gas Tank Supports I would do all of that. Sand, wirebrush, whatever you prefer. Im not sure what rhino liner can be sprayed on, but maybe self-etching primer. Rhino the whole floor .......fill in your threaded holes first. Good to see you back on here with some updates. __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

02-09-2009, 12:48 PM	#18
ol Curt Junior Member Join Date: Dec 2006 Location: Newburgh, IN Posts: 1,247	Re: Removing in Cab Gas Tank Supports If you're going to be the Sheriff, you have to be quick on the draw!!

02-09-2009, 01:00 PM	#19
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: Removing in Cab Gas Tank Supports __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q

02-11-2009, 08:24 PM	#20
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Removing in Cab Gas Tank Supports __________________ *CHEVY ONLY*

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.